From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Hongyu Xie <xiehongyu1@kylinos.cn>,
stable <stable@kernel.org>
Subject: [PATCH 6.15 20/34] usb: storage: Ignore UAS driver for SanDisk 3.2 Gen2 storage device
Date: Sat, 7 Jun 2025 12:08:01 +0200 [thread overview]
Message-ID: <20250607100720.508025283@linuxfoundation.org> (raw)
In-Reply-To: <20250607100719.711372213@linuxfoundation.org>
6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hongyu Xie <xiehongyu1@kylinos.cn>
commit a541acceedf4f639f928f41fbb676b75946dc295 upstream.
SanDisk 3.2 Gen2 storage device(0781:55e8) doesn't work well with UAS.
Log says,
[ 6.507865][ 3] [ T159] usb 2-1.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[ 6.540314][ 3] [ T159] usb 2-1.4: New USB device found, idVendor=0781, idProduct=55e8, bcdDevice= 0.01
[ 6.576304][ 3] [ T159] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.584727][ 3] [ T159] usb 2-1.4: Product: SanDisk 3.2 Gen2
[ 6.590459][ 3] [ T159] usb 2-1.4: Manufacturer: SanDisk
[ 6.595845][ 3] [ T159] usb 2-1.4: SerialNumber: 03021707022525140940
[ 7.230852][ 0] [ T265] usbcore: registered new interface driver usb-storage
[ 7.251247][ 0] [ T265] scsi host3: uas
[ 7.255280][ 0] [ T265] usbcore: registered new interface driver uas
[ 7.270498][ 1] [ T192] scsi 3:0:0:0: Direct-Access SanDisk Extreme Pro DDE1 0110 PQ: 0 ANSI: 6
[ 7.299588][ 3] [ T192] scsi 3:0:0:1: Enclosure SanDisk SES Device 0110 PQ: 0 ANSI: 6
[ 7.321681][ 3] [ T192] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 7.328185][ 3] [ T192] scsi 3:0:0:1: Attached scsi generic sg2 type 13
[ 7.328804][ 0] [ T191] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 7.343486][ 0] [ T191] sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 7.364611][ 0] [ T191] sd 3:0:0:0: [sda] Write Protect is off
[ 7.370524][ 0] [ T191] sd 3:0:0:0: [sda] Mode Sense: 3d 00 10 00
[ 7.390655][ 0] [ T191] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 7.401363][ 0] [ T191] sd 3:0:0:0: [sda] Optimal transfer size 1048576 bytes
[ 7.436010][ 0] [ T191] sda: sda1
[ 7.450850][ 0] [ T191] sd 3:0:0:0: [sda] Attached SCSI disk
[ 7.470218][ 4] [ T262] scsi 3:0:0:1: Failed to get diagnostic page 0x1
[ 7.474869][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 data cmplt err -75 uas-tag 2 inflight: CMD
[ 7.476911][ 4] [ T262] scsi 3:0:0:1: Failed to bind enclosure -19
[ 7.485330][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00
[ 7.491593][ 4] [ T262] ses 3:0:0:1: Attached Enclosure device
[ 38.066980][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN
[ 38.076012][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 00 00 01 08 00 00 f8 00
[ 38.086485][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 38.095515][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 10 00 00 08 00
[ 38.104122][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN
[ 38.113152][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 00 00 00 88 00 00 78 00
[ 38.121761][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
[ 38.130791][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 00 00 00 48 00 00 30 00
[ 38.139401][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD
[ 38.148170][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00
[ 38.178980][ 2] [ T304] scsi host3: uas_eh_device_reset_handler start
[ 38.901540][ 2] [ T304] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[ 38.936791][ 2] [ T304] scsi host3: uas_eh_device_reset_handler success
Device decriptor is below,
Bus 002 Device 006: ID 0781:55e8 SanDisk Corp. SanDisk 3.2 Gen2
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x0781 SanDisk Corp.
idProduct 0x55e8
bcdDevice 0.01
iManufacturer 1 SanDisk
iProduct 2 SanDisk 3.2 Gen2
iSerial 3 03021707022525140940
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0079
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 896mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-out pipe (0x04)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x002a
bNumDeviceCaps 3
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x0000f41e
BESL Link Power Management (LPM) Supported
BESL value 1024 us
Deep BESL value 61440 us
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
SuperSpeedPlus USB Device Capability:
bLength 20
bDescriptorType 16
bDevCapabilityType 10
bmAttributes 0x00000001
Sublink Speed Attribute count 1
Sublink Speed ID count 0
wFunctionalitySupport 0x1100
bmSublinkSpeedAttr[0] 0x000a4030
Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus
bmSublinkSpeedAttr[1] 0x000a40b0
Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus
Device Status: 0x0000
(Bus Powered)
So ignore UAS driver for this device.
Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250519023328.1498856-1-xiehongyu1@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/storage/unusual_uas.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -52,6 +52,13 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x99
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
+/* Reported-by: Zhihong Zhou <zhouzhihong@greatwall.com.cn> */
+UNUSUAL_DEV(0x0781, 0x55e8, 0x0000, 0x9999,
+ "SanDisk",
+ "",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),
+
/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */
UNUSUAL_DEV(0x090c, 0x2000, 0x0000, 0x9999,
"Hiksemi",
next prev parent reply other threads:[~2025-06-07 10:11 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-07 10:07 [PATCH 6.15 00/34] 6.15.2-rc1 review Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 01/34] tracing: Fix compilation warning on arm32 Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 02/34] Revert "x86/smp: Eliminate mwait_play_dead_cpuid_hint()" Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 03/34] ACPICA: Introduce ACPI_NONSTRING Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 04/34] ACPICA: Apply ACPI_NONSTRING Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 05/34] ACPICA: Apply ACPI_NONSTRING in more places Greg Kroah-Hartman
2025-06-12 5:31 ` Collin Funk
2025-06-12 7:23 ` Jiri Slaby
2025-06-12 8:15 ` Ahmed Salem
2025-06-13 2:17 ` Collin Funk
2025-06-13 2:12 ` Collin Funk
2025-06-07 10:07 ` [PATCH 6.15 06/34] pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31 Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 07/34] pinctrl: armada-37xx: set GPIO output value before setting direction Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 08/34] clk: samsung: correct clock summary for hsi1 block Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 09/34] acpi-cpufreq: Fix nominal_freq units to KHz in get_max_boost_ratio() Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 10/34] Documentation: ACPI: Use all-string data node references Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 11/34] pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 12/34] rtc: Make rtc_time64_to_tm() support dates before 1970 Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 13/34] rtc: Fix offset calculation for .start_secs < 0 Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 14/34] bcachefs: Kill un-reverted directory i_size code Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 15/34] bcachefs: Repair code for directory i_size Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 16/34] bcachefs: delete dead code from may_delete_deleted_inode() Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 17/34] bcachefs: Run may_delete_deleted_inode() checks in bch2_inode_rm() Greg Kroah-Hartman
2025-06-07 10:07 ` [PATCH 6.15 18/34] bcachefs: Fix subvol to missing root repair Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 19/34] usb: quirks: Add NO_LPM quirk for SanDisk Extreme 55AE Greg Kroah-Hartman
2025-06-07 10:08 ` Greg Kroah-Hartman [this message]
2025-06-07 10:08 ` [PATCH 6.15 21/34] USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 22/34] usb: typec: ucsi: fix Clang -Wsign-conversion warning Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 23/34] Bluetooth: hci_qca: move the SoC type check to the right place Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 24/34] serial: jsm: fix NPE during jsm_uart_port_init Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 25/34] nvmem: rmem: select CONFIG_CRC32 Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 26/34] usb: usbtmc: Fix timeout value in get_stb Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 27/34] binder: fix use-after-free in binderfs_evict_inode() Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 28/34] binder: fix yet another UAF in binder_devices Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 29/34] thunderbolt: Do not double dequeue a configuration request Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 30/34] dt-bindings: pwm: adi,axi-pwmgen: Fix clocks Greg Kroah-Hartman
2025-06-10 14:12 ` David Lechner
2025-06-07 10:08 ` [PATCH 6.15 31/34] dt-bindings: remoteproc: qcom,sm8150-pas: Add missing SC8180X compatible Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 32/34] dt-bindings: usb: cypress,hx3: Add support for all variants Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 33/34] dt-bindings: phy: imx8mq-usb: fix fsl,phy-tx-vboost-level-microvolt property Greg Kroah-Hartman
2025-06-07 10:08 ` [PATCH 6.15 34/34] Revert "drm/amd/display: more liberal vmin/vmax update for freesync" Greg Kroah-Hartman
2025-06-07 11:42 ` [PATCH 6.15 00/34] 6.15.2-rc1 review Christian Heusel
2025-06-07 11:50 ` Ronald Warsow
2025-06-08 5:26 ` Luna Jernberg
2025-06-07 20:19 ` Florian Fainelli
2025-06-08 5:13 ` Takeshi Ogasawara
2025-06-08 5:38 ` Ron Economos
2025-06-08 6:53 ` Naresh Kamboju
2025-06-08 17:40 ` Peter Schneider
2025-06-08 22:31 ` Mark Brown
2025-06-09 12:48 ` Jon Hunter
2025-06-12 20:30 ` Miguel Ojeda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250607100720.508025283@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=patches@lists.linux.dev \
--cc=stable@kernel.org \
--cc=stable@vger.kernel.org \
--cc=xiehongyu1@kylinos.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.