From: Jakub Kicinski <kuba@kernel.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, edumazet@google.com, pabeni@redhat.com,
andrew+netdev@lunn.ch, horms@kernel.org, bharat@chelsio.com,
benve@cisco.com, satishkh@cisco.com, claudiu.manoil@nxp.com,
vladimir.oltean@nxp.com, wei.fang@nxp.com, xiaoning.wang@nxp.com,
anthony.l.nguyen@intel.com, przemyslaw.kitszel@intel.com,
bryan.whitehead@microchip.com, ecree.xilinx@gmail.com,
rosenp@gmail.com, imx@lists.linux.dev,
Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH net-next 2/6] eth: cxgb4: migrate to new RXFH callbacks
Date: Thu, 12 Jun 2025 17:54:05 -0700 [thread overview]
Message-ID: <20250613005409.3544529-3-kuba@kernel.org> (raw)
In-Reply-To: <20250613005409.3544529-1-kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc61 ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed so the conversion
is purely factoring out the handling into a helper.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
.../ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 105 +++++++++---------
1 file changed, 55 insertions(+), 50 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index 1546c3db08f0..23326235d4ab 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -1730,6 +1730,60 @@ static int cxgb4_ntuple_get_filter(struct net_device *dev,
return 0;
}
+static int cxgb4_get_rxfh_fields(struct net_device *dev,
+ struct ethtool_rxfh_fields *info)
+{
+ const struct port_info *pi = netdev_priv(dev);
+ unsigned int v = pi->rss_mode;
+
+ info->data = 0;
+ switch (info->flow_type) {
+ case TCP_V4_FLOW:
+ if (v & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN_F)
+ info->data = RXH_IP_SRC | RXH_IP_DST |
+ RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ else if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F)
+ info->data = RXH_IP_SRC | RXH_IP_DST;
+ break;
+ case UDP_V4_FLOW:
+ if ((v & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN_F) &&
+ (v & FW_RSS_VI_CONFIG_CMD_UDPEN_F))
+ info->data = RXH_IP_SRC | RXH_IP_DST |
+ RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ else if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F)
+ info->data = RXH_IP_SRC | RXH_IP_DST;
+ break;
+ case SCTP_V4_FLOW:
+ case AH_ESP_V4_FLOW:
+ case IPV4_FLOW:
+ if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F)
+ info->data = RXH_IP_SRC | RXH_IP_DST;
+ break;
+ case TCP_V6_FLOW:
+ if (v & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN_F)
+ info->data = RXH_IP_SRC | RXH_IP_DST |
+ RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ else if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F)
+ info->data = RXH_IP_SRC | RXH_IP_DST;
+ break;
+ case UDP_V6_FLOW:
+ if ((v & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN_F) &&
+ (v & FW_RSS_VI_CONFIG_CMD_UDPEN_F))
+ info->data = RXH_IP_SRC | RXH_IP_DST |
+ RXH_L4_B_0_1 | RXH_L4_B_2_3;
+ else if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F)
+ info->data = RXH_IP_SRC | RXH_IP_DST;
+ break;
+ case SCTP_V6_FLOW:
+ case AH_ESP_V6_FLOW:
+ case IPV6_FLOW:
+ if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F)
+ info->data = RXH_IP_SRC | RXH_IP_DST;
+ break;
+ }
+ return 0;
+}
+
static int get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info,
u32 *rules)
{
@@ -1739,56 +1793,6 @@ static int get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info,
int ret = 0;
switch (info->cmd) {
- case ETHTOOL_GRXFH: {
- unsigned int v = pi->rss_mode;
-
- info->data = 0;
- switch (info->flow_type) {
- case TCP_V4_FLOW:
- if (v & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN_F)
- info->data = RXH_IP_SRC | RXH_IP_DST |
- RXH_L4_B_0_1 | RXH_L4_B_2_3;
- else if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F)
- info->data = RXH_IP_SRC | RXH_IP_DST;
- break;
- case UDP_V4_FLOW:
- if ((v & FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN_F) &&
- (v & FW_RSS_VI_CONFIG_CMD_UDPEN_F))
- info->data = RXH_IP_SRC | RXH_IP_DST |
- RXH_L4_B_0_1 | RXH_L4_B_2_3;
- else if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F)
- info->data = RXH_IP_SRC | RXH_IP_DST;
- break;
- case SCTP_V4_FLOW:
- case AH_ESP_V4_FLOW:
- case IPV4_FLOW:
- if (v & FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN_F)
- info->data = RXH_IP_SRC | RXH_IP_DST;
- break;
- case TCP_V6_FLOW:
- if (v & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN_F)
- info->data = RXH_IP_SRC | RXH_IP_DST |
- RXH_L4_B_0_1 | RXH_L4_B_2_3;
- else if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F)
- info->data = RXH_IP_SRC | RXH_IP_DST;
- break;
- case UDP_V6_FLOW:
- if ((v & FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN_F) &&
- (v & FW_RSS_VI_CONFIG_CMD_UDPEN_F))
- info->data = RXH_IP_SRC | RXH_IP_DST |
- RXH_L4_B_0_1 | RXH_L4_B_2_3;
- else if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F)
- info->data = RXH_IP_SRC | RXH_IP_DST;
- break;
- case SCTP_V6_FLOW:
- case AH_ESP_V6_FLOW:
- case IPV6_FLOW:
- if (v & FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN_F)
- info->data = RXH_IP_SRC | RXH_IP_DST;
- break;
- }
- return 0;
- }
case ETHTOOL_GRXRINGS:
info->data = pi->nqsets;
return 0;
@@ -2199,6 +2203,7 @@ static const struct ethtool_ops cxgb_ethtool_ops = {
.get_rxfh_indir_size = get_rss_table_size,
.get_rxfh = get_rss_table,
.set_rxfh = set_rss_table,
+ .get_rxfh_fields = cxgb4_get_rxfh_fields,
.self_test = cxgb4_self_test,
.flash_device = set_flash,
.get_ts_info = get_ts_info,
--
2.49.0
next prev parent reply other threads:[~2025-06-13 0:54 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-13 0:54 [PATCH net-next 0/6] eth: migrate to new RXFH callbacks (get-only drivres) Jakub Kicinski
2025-06-13 0:54 ` [PATCH net-next 1/6] eth: cisco: migrate to new RXFH callbacks Jakub Kicinski
2025-06-13 5:42 ` Joe Damato
2025-06-13 0:54 ` Jakub Kicinski [this message]
2025-06-13 5:43 ` [PATCH net-next 2/6] eth: cxgb4: " Joe Damato
2025-06-13 0:54 ` [PATCH net-next 3/6] eth: lan743x: " Jakub Kicinski
2025-06-13 5:44 ` Joe Damato
2025-06-13 0:54 ` [PATCH net-next 4/6] eth: e1000e: " Jakub Kicinski
2025-06-13 5:46 ` Joe Damato
2025-06-13 0:54 ` [PATCH net-next 5/6] eth: enetc: " Jakub Kicinski
2025-06-13 2:00 ` Wei Fang
2025-06-13 0:54 ` [PATCH net-next 6/6] eth: sfc: falcon: " Jakub Kicinski
2025-06-13 13:44 ` Edward Cree
2025-06-13 14:50 ` Jakub Kicinski
2025-06-16 15:32 ` Edward Cree
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250613005409.3544529-3-kuba@kernel.org \
--to=kuba@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=anthony.l.nguyen@intel.com \
--cc=benve@cisco.com \
--cc=bharat@chelsio.com \
--cc=bryan.whitehead@microchip.com \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=ecree.xilinx@gmail.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=imx@lists.linux.dev \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=rosenp@gmail.com \
--cc=satishkh@cisco.com \
--cc=vladimir.oltean@nxp.com \
--cc=wei.fang@nxp.com \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.