All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Peter Chen (CIX)" <peter.chen@kernel.org>
To: Xu Yang <xu.yang_2@nxp.com>
Cc: gregkh@linuxfoundation.org, shawnguo@kernel.org,
	s.hauer@pengutronix.d, kernel@pengutronix.de, festevam@gmail.com,
	jun.li@nxp.com, linux-usb@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/3] usb: chipidea: imx: implement workaround for ERR051725
Date: Wed, 18 Jun 2025 18:40:13 +0800	[thread overview]
Message-ID: <20250618104013.GD34284@nchen-desktop> (raw)
In-Reply-To: <20250614125645.207732-4-xu.yang_2@nxp.com>

On 25-06-14 20:56:45, Xu Yang wrote:
> ERR051725:
> USB: With the USB controller configured as device mode, Clearing the RS
> bit of USBCMD register fails to cause USB device to be detached
> 
> Description
> 1. USB controller working as high speed device mode with USB gadget
>    function enabled
> 2. Cable plugged into USB host
> 3. Use case is software-controlled detach from USB device side
> 
> The expected result is device side terminations removed, increase in USB
> signal amplitude, USB host detect device is detached. But the issue is
> that the clear RS bit of USBCMD register cannot cause device detach event.
> 
> Workaround
> - Use the below steps to detach from the host:
>     write USBCMD.RS = 0b
>     write CTRL2[7:6] = 01b
>     write CTRL2[8] = 1b
> - As CTRL2[8] is set at detach case, so attach the steps should add clear
>   CTRL2[8]:
>     write USBCMD.RS = 1b
>     write CTRL2[8] = 0b
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

Acked-by: Peter Chen <peter.chen@kernel.org>

Peter
> ---
>  drivers/usb/chipidea/ci_hdrc_imx.c |  5 +++++
>  drivers/usb/chipidea/usbmisc_imx.c | 21 +++++++++++++++++++++
>  2 files changed, 26 insertions(+)
> 
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index 780f4d151345..79e466e17788 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -331,6 +331,11 @@ static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned int event)
>  		if (ci->usb_phy)
>  			schedule_work(&ci->usb_phy->chg_work);
>  		break;
> +	case CI_HDRC_CONTROLLER_PULLUP_EVENT:
> +		if (ci->role == CI_ROLE_GADGET)
> +			imx_usbmisc_pullup(data->usbmisc_data,
> +					   ci->gadget.connected);
> +		break;
>  	default:
>  		break;
>  	}
> diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
> index 9db67d6d0ec4..415d3ba2e9ad 100644
> --- a/drivers/usb/chipidea/usbmisc_imx.c
> +++ b/drivers/usb/chipidea/usbmisc_imx.c
> @@ -998,6 +998,25 @@ static int usbmisc_imx7ulp_init(struct imx_usbmisc_data *data)
>  	return 0;
>  }
>  
> +static void usbmisc_imx7d_pullup(struct imx_usbmisc_data *data, bool on)
> +{
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
> +	unsigned long flags;
> +	u32 val;
> +
> +	spin_lock_irqsave(&usbmisc->lock, flags);
> +	val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
> +	if (!on) {
> +		val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK;
> +		val |= MX7D_USBNC_USB_CTRL2_OPMODE(1);
> +		val |= MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN;
> +	} else {
> +		val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN;
> +	}
> +	writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2);
> +	spin_unlock_irqrestore(&usbmisc->lock, flags);
> +}
> +
>  static int usbmisc_imx7d_power_lost_check(struct imx_usbmisc_data *data)
>  {
>  	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
> @@ -1115,6 +1134,7 @@ static const struct usbmisc_ops imx7d_usbmisc_ops = {
>  	.set_wakeup = usbmisc_imx7d_set_wakeup,
>  	.charger_detection = imx7d_charger_detection,
>  	.power_lost_check = usbmisc_imx7d_power_lost_check,
> +	.pullup = usbmisc_imx7d_pullup,
>  	.vbus_comparator_on = usbmisc_imx7d_vbus_comparator_on,
>  };
>  
> @@ -1131,6 +1151,7 @@ static const struct usbmisc_ops imx95_usbmisc_ops = {
>  	.set_wakeup = usbmisc_imx95_set_wakeup,
>  	.charger_detection = imx7d_charger_detection,
>  	.power_lost_check = usbmisc_imx7d_power_lost_check,
> +	.pullup = usbmisc_imx7d_pullup,
>  	.vbus_comparator_on = usbmisc_imx7d_vbus_comparator_on,
>  };
>  
> -- 
> 2.34.1
> 

-- 

Best regards,
Peter

  reply	other threads:[~2025-06-18 10:40 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-14 12:56 [PATCH 0/3] implement workaround for ERR051725 Xu Yang
2025-06-14 12:56 ` [PATCH 1/3] usb: chipidea: udc: add CI_HDRC_CONTROLLER_PULLUP_EVENT event Xu Yang
2025-06-18 10:35   ` Peter Chen (CIX)
2025-06-14 12:56 ` [PATCH 2/3] usb: chipidea: imx: add imx_usbmisc_pullup() hook Xu Yang
2025-06-18 10:36   ` Peter Chen (CIX)
2025-06-14 12:56 ` [PATCH 3/3] usb: chipidea: imx: implement workaround for ERR051725 Xu Yang
2025-06-18 10:40   ` Peter Chen (CIX) [this message]
2025-06-17  8:19 ` [PATCH 0/3] " Peter Chen (CIX)
2025-06-18  6:06   ` Xu Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250618104013.GD34284@nchen-desktop \
    --to=peter.chen@kernel.org \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=imx@lists.linux.dev \
    --cc=jun.li@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=s.hauer@pengutronix.d \
    --cc=shawnguo@kernel.org \
    --cc=xu.yang_2@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.