[PATCH v10 3/4] docs: ABI: Document LP5812 LED sysfs interfaces

[Nam Tran <trannamatk@gmail.com>]

The LP5812 is a 4x3 matrix RGB LED driver with autonomous animation
engine control.

The driver provides interfaces to configure LED modes manual/autonomous,
set PWM/DC values, and manage autonomous animation engines.

Signed-off-by: Nam Tran <trannamatk@gmail.com>
---
 .../ABI/testing/sysfs-bus-i2c-devices-lp5812  |  40 ++++++
 .../ABI/testing/sysfs-class-led-lp5812        | 120 ++++++++++++++++++
 MAINTAINERS                                   |   2 +
 3 files changed, 162 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-lp5812
 create mode 100644 Documentation/ABI/testing/sysfs-class-led-lp5812

diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-lp5812 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-lp5812
new file mode 100644
index 000000000000..a8b1d5c52a82
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-lp5812
@@ -0,0 +1,40 @@
+What:		/sys/bus/i2c/devices/.../lp5812_chip_setup/dev_config
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Configures drive mode and scan order. (WO)
+		Some valid values: tcmscan:4:0:1:2:3 (default), tcmscan:3:0:1:2, mixscan:2:2:0:3, mixscan:3:0:1:2:3
+
+What:		/sys/bus/i2c/devices/.../lp5812_chip_setup/device_command
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Issues device-level commands. (WO)
+		Valid values: "update", "start", "stop", "pause", "continue"
+
+What:		/sys/bus/i2c/devices/.../lp5812_chip_setup/sw_reset
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Triggers a software reset of the device. (WO)
+		1 - resets device
+		0 - does not reset device
+
+What:		/sys/bus/i2c/devices/.../lp5812_chip_setup/fault_clear
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Clears fault status. (WO)
+		1 - clears fault status
+		0 - does not clear fault status
+
+What:		/sys/bus/i2c/devices/.../lp5812_chip_setup/tsd_config_status
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Report the current thermal shutdown config status. (RO)
diff --git a/Documentation/ABI/testing/sysfs-class-led-lp5812 b/Documentation/ABI/testing/sysfs-class-led-lp5812
new file mode 100644
index 000000000000..a6cb49fb523f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led-lp5812
@@ -0,0 +1,120 @@
+What:		/sys/class/leds/led_<id>/activate
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Activate or deactivate the specified LED channel. (WO)
+		1 - Activate
+		0 - Deactivate
+
+What:		/sys/class/leds/led_<id>/mode
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Selects LED operation mode. (WO)
+		Valid values: "manual", "autonomous"
+
+What:		/sys/class/leds/led_<id>/led_current
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		DC current level. (WO)
+		Valid values: 0 - 255
+
+What:		/sys/class/leds/led_<id>/max_current
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Shows maximum DC current bit setting. (RO)
+		0 (default) means the LED maximum current is set to 25.5 mA.
+		1 means the LED maximum current is set to 51 mA.
+
+What:		/sys/class/leds/led_<id>/pwm_dimming_scale
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		PWM dimming scale type. (WO)
+		Valid values: "linear", "exponential"
+
+What:		/sys/class/leds/led_<id>/pwm_phase_align
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Configures PWM phase alignment. (WO)
+		Valid values: "forward", "middle", "backward"
+
+What:		/sys/class/leds/led_<id>/auto_time_pause_at_start
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Controls start pause time. (WO)
+		Valid values: 0 - 15
+
+What:		/sys/class/leds/led_<id>/auto_time_pause_at_stop
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Controls stop pause time. (WO)
+		Valid values: 0 - 15
+
+What:		/sys/class/leds/led_<id>/auto_playback_eau_number
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Active AEU number of led_<id> selection. (WO)
+		Valid values: 0 - 3
+		0 - only use AEU1
+		1 - use AEU1 and AEU2
+		2 - use AEU1, AEU2 and AEU3
+		3 - use AEU1, AEU2 and AEU3 (the same as 2)
+
+What:		/sys/class/leds/led_<id>/auto_playback_time
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		Animation pattern playback times of led_<id>. (WO)
+		Valid values: 0 - 15
+		0 - 14 means 0 - 14 times, 15 means infinite times
+
+What:		/sys/class/leds/led_<id>/aeu_playback_time
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		AEU pattern playback times of led_<id>. (WO)
+		Format: aeu<x>:<y> where x (1 - 3) indicates the AEU number,
+		y (0 - 3) indicates the number of playback times.
+
+What:		/sys/class/leds/led_<id>/aeu_pwm_<pwm_id>
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		AEU PWM duty cycle setting. (WO)
+		Format: aeu<x>:<y> where x (1 - 3) indicates the AEU number,
+		y (0 - 255) indicates pwm value.
+
+What:		/sys/class/leds/led_<id>/aeu_slop_time_<st_id>
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		AEU slop time setting. (WO)
+		Format: aeu<x>:<y> where x (1 - 3) indicates the AEU number,
+		y (0 - 15) indicates the slop time value.
+
+What:		/sys/class/leds/led_<id>/lod_lsd
+Date:		July 2025
+KernelVersion:	6.17
+Contact:	Nam Tran <trannamatk@gmail.com>
+Description:
+		0 0 mean no lod and lsd fault detected, 1 1 mean lod and lsd fault detected (RO)
diff --git a/MAINTAINERS b/MAINTAINERS
index b4eb3265c800..cdba86f1768b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -24565,6 +24565,8 @@ TEXAS INSTRUMENTS' LP5812 RGB LED DRIVER
 M:	Nam Tran <trannamatk@gmail.com>
 L:	linux-leds@vger.kernel.org
 S:	Maintained
+F:	Documentation/ABI/testing/sysfs-bus-i2c-devices-lp5812
+F:	Documentation/ABI/testing/sysfs-class-led-lp5812
 F:	Documentation/devicetree/bindings/leds/ti,lp5812.yaml
 F:	drivers/leds/rgb/Kconfig
 F:	drivers/leds/rgb/Makefile
-- 
2.25.1