From: RD Babiera <rdbabiera@google.com>
Cc: heikki.krogerus@linux.intel.com, badhri@google.com,
gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, RD Babiera <rdbabiera@google.com>
Subject: [PATCH v1] usb: typec: altmodes/displayport: add irq_hpd to sysfs
Date: Thu, 19 Jun 2025 00:03:40 +0000 [thread overview]
Message-ID: <20250619000343.3299526-2-rdbabiera@google.com> (raw)
Add irq_hpd sysfs node to displayport driver. This allows the userspace
to subscribe to irq events similar to how it can subscribe to changes in
hpd.
irq_hpd is read only and returns the number of irq events generated since
driver probe. pending_irq_hpd is added so that a sysfs_emit can be
generated if the HPD high event belonging to the same status message
is delayed until a successful configuration.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
---
.../testing/sysfs-driver-typec-displayport | 10 +++++++
drivers/usb/typec/altmodes/displayport.c | 29 +++++++++++++++++++
2 files changed, 39 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-driver-typec-displayport b/Documentation/ABI/testing/sysfs-driver-typec-displayport
index 256c87c5219a..314acd54e13e 100644
--- a/Documentation/ABI/testing/sysfs-driver-typec-displayport
+++ b/Documentation/ABI/testing/sysfs-driver-typec-displayport
@@ -62,3 +62,13 @@ Description:
by VESA DisplayPort Alt Mode on USB Type-C Standard.
- 0 when HPD’s logical state is low (HPD_Low) as defined by
VESA DisplayPort Alt Mode on USB Type-C Standard.
+
+What: /sys/bus/typec/devices/.../displayport/irq_hpd
+Date: June 2025
+Contact: RD Babiera <rdbabiera@google.com>
+Description:
+ IRQ_HPD events are sent over the USB PD protocol in Status Update and
+ Attention messages. IRQ_HPD can only be asserted when HPD is high,
+ and is asserted when an IRQ_HPD has been issued since the last Status
+ Update. This is a read only node that returns the number of IRQ events
+ raised in the driver's lifetime.
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index b09b58d7311d..7a04bb101337 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -65,6 +65,13 @@ struct dp_altmode {
enum dp_state state;
bool hpd;
bool pending_hpd;
+ u32 irq_hpd_count;
+ /*
+ * hpd is mandatory for irq_hpd assertion, so irq_hpd also needs its own pending flag if
+ * both hpd and irq_hpd are asserted in the first Status Update before the pin assignment
+ * is configured.
+ */
+ bool pending_irq_hpd;
struct mutex lock; /* device lock */
struct work_struct work;
@@ -151,6 +158,7 @@ static int dp_altmode_status_update(struct dp_altmode *dp)
{
bool configured = !!DP_CONF_GET_PIN_ASSIGN(dp->data.conf);
bool hpd = !!(dp->data.status & DP_STATUS_HPD_STATE);
+ bool irq_hpd = !!(dp->data.status & DP_STATUS_IRQ_HPD);
u8 con = DP_STATUS_CONNECTION(dp->data.status);
int ret = 0;
@@ -170,6 +178,9 @@ static int dp_altmode_status_update(struct dp_altmode *dp)
dp->hpd = hpd;
dp->pending_hpd = true;
}
+ if (dp->hpd && dp->pending_hpd && irq_hpd) {
+ dp->pending_irq_hpd = true;
+ }
}
} else {
drm_connector_oob_hotplug_event(dp->connector_fwnode,
@@ -177,6 +188,10 @@ static int dp_altmode_status_update(struct dp_altmode *dp)
connector_status_disconnected);
dp->hpd = hpd;
sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd");
+ if (hpd && irq_hpd) {
+ dp->irq_hpd_count++;
+ sysfs_notify(&dp->alt->dev.kobj, "displayport", "irq_hpd");
+ }
}
return ret;
@@ -196,6 +211,11 @@ static int dp_altmode_configured(struct dp_altmode *dp)
connector_status_connected);
sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd");
dp->pending_hpd = false;
+ if (dp->pending_irq_hpd) {
+ dp->irq_hpd_count++;
+ sysfs_notify(&dp->alt->dev.kobj, "displayport", "irq_hpd");
+ dp->pending_irq_hpd = false;
+ }
}
return dp_altmode_notify(dp);
@@ -707,10 +727,19 @@ static ssize_t hpd_show(struct device *dev, struct device_attribute *attr, char
}
static DEVICE_ATTR_RO(hpd);
+static ssize_t irq_hpd_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct dp_altmode *dp = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d\n", dp->irq_hpd_count);
+}
+static DEVICE_ATTR_RO(irq_hpd);
+
static struct attribute *displayport_attrs[] = {
&dev_attr_configuration.attr,
&dev_attr_pin_assignment.attr,
&dev_attr_hpd.attr,
+ &dev_attr_irq_hpd.attr,
NULL
};
base-commit: e04c78d86a9699d136910cfc0bdcf01087e3267e
--
2.50.0.rc2.701.gf1e915cc24-goog
next reply other threads:[~2025-06-19 0:03 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-19 0:03 RD Babiera [this message]
2025-06-19 4:32 ` [PATCH v1] usb: typec: altmodes/displayport: add irq_hpd to sysfs Greg KH
2025-06-23 20:28 ` RD Babiera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250619000343.3299526-2-rdbabiera@google.com \
--to=rdbabiera@google.com \
--cc=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.