Re: [PATCH v3] pwm: mc33xs2410: add support for temperature sensors

[Dimitri Fedrau <dima.fedrau@gmail.com>]

Hi Uwe,

Am Mon, Jun 23, 2025 at 11:07:24AM +0200 schrieb Uwe Kleine-König:
> hello Dimitri,
> 
> On Thu, Jun 19, 2025 at 07:32:42PM +0200, Dimitri Fedrau via B4 Relay wrote:
> > @@ -29,6 +30,8 @@
> >  
> >  #include <linux/spi/spi.h>
> >  
> > +/* ctrl registers */
> > +
> >  #define MC33XS2410_GLB_CTRL			0x00
> >  #define MC33XS2410_GLB_CTRL_MODE		GENMASK(7, 6)
> >  #define MC33XS2410_GLB_CTRL_MODE_NORMAL		FIELD_PREP(MC33XS2410_GLB_CTRL_MODE, 1)
> > @@ -51,6 +54,21 @@
> >  
> >  #define MC33XS2410_WDT				0x14
> >  
> > +#define MC33XS2410_TEMP_WT			0x29
> > +#define MC33XS2410_TEMP_WT_MASK			GENMASK(7, 0)
> > +
> > +/* diag registers */
> > +
> > +/* chan in { 1 ... 4 } */
> > +#define MC33XS2410_OUT_STA(chan)		(0x02 + (chan) - 1)
> > +#define MC33XS2410_OUT_STA_OTW			BIT(8)
> > +
> > +#define MC33XS2410_TS_TEMP_DIE			0x26
> > +#define MC33XS2410_TS_TEMP_MASK			GENMASK(9, 0)
> 
> Keep the registers in address order please
> 
Aren't they ? There are "ctrl" and "diag" registers and I didn't mix up
adresses. There is a comment for each of them when defines start.

> > +/* chan in { 1 ... 4 } */
> > +#define MC33XS2410_TS_TEMP(chan)		(0x2f + (chan) - 1)
> 
> I wonder if it would be cleaner if this was abstracted using mfd. Then
> the hwmon driver could live in drivers/hwmon
> 
I will have a look into auxiliary devices as Guenter proposed in a
following mail.

> Liebe Grüße
> Uwe

Viele Grüße
Dimitri