All of lore.kernel.org
 help / color / mirror / Atom feed
From: Raju Rangoju <Raju.Rangoju@amd.com>
To: <andrew+netdev@lunn.ch>, <davem@davemloft.net>,
	<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>
Cc: <netdev@vger.kernel.org>, <Shyam-sundar.S-k@amd.com>,
	Raju Rangoju <Raju.Rangoju@amd.com>
Subject: [PATCH net v2] amd-xgbe: do not double read link status
Date: Wed, 25 Jun 2025 15:23:15 +0530	[thread overview]
Message-ID: <20250625095315.232566-1-Raju.Rangoju@amd.com> (raw)

The link status is latched low so that momentary link drops
can be detected. Avoid double-reading the status to identify
short link interruptions, unless the link was already down.

This prevents unnecessary duplicate readings of the link status.

Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
- skip double-read to detect short link drops
- refine the subject line for clarity

 drivers/net/ethernet/amd/xgbe/xgbe-mdio.c   |  4 +++
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 27 +++++++++++++--------
 2 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
index 71449edbb76d..f8a75532b11c 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
@@ -1295,6 +1295,10 @@ static void xgbe_phy_status(struct xgbe_prv_data *pdata)
 
 	pdata->phy.link = pdata->phy_if.phy_impl.link_status(pdata,
 							     &an_restart);
+	/* bail out if the link status register read fails */
+	if (pdata->phy.link < 0)
+		return;
+
 	if (an_restart) {
 		xgbe_phy_config_aneg(pdata);
 		goto adjust_link;
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 7a4dfa4e19c7..94125197738c 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -2746,8 +2746,7 @@ static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
 static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart)
 {
 	struct xgbe_phy_data *phy_data = pdata->phy_data;
-	unsigned int reg;
-	int ret;
+	int reg, ret;
 
 	*an_restart = 0;
 
@@ -2780,13 +2779,23 @@ static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart)
 		if (!phy_data->phydev->link)
 			return 0;
 	}
-
-	/* Link status is latched low, so read once to clear
-	 * and then read again to get current state
+	/* Link status is latched low so that momentary link drops
+	 * can be detected. Do not double-read the status to detect
+	 * short link drops except the link was already down.
 	 */
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+	if (!pdata->phy.link) {
+		reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+		if (reg < 0)
+			return reg;
+
+		if (reg & MDIO_STAT1_LSTATUS)
+			goto skip_read;
+	}
 
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+	if (reg < 0)
+		return reg;
+skip_read:
 	if (pdata->en_rx_adap) {
 		/* if the link is available and adaptation is done,
 		 * declare link up
@@ -2804,9 +2813,7 @@ static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart)
 			xgbe_phy_set_mode(pdata, phy_data->cur_mode);
 		}
 
-		/* check again for the link and adaptation status */
-		reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
-		if ((reg & MDIO_STAT1_LSTATUS) && pdata->rx_adapt_done)
+		if (pdata->rx_adapt_done)
 			return 1;
 	} else if (reg & MDIO_STAT1_LSTATUS)
 		return 1;
-- 
2.34.1


             reply	other threads:[~2025-06-25  9:53 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-25  9:53 Raju Rangoju [this message]
2025-07-01  1:12 ` [PATCH net v2] amd-xgbe: do not double read link status Jakub Kicinski
2025-07-01  6:42   ` Rangoju, Raju

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250625095315.232566-1-Raju.Rangoju@amd.com \
    --to=raju.rangoju@amd.com \
    --cc=Shyam-sundar.S-k@amd.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.