From: Rob Herring <robh@kernel.org>
To: Luca Weiss <luca.weiss@fairphone.com>
Cc: Georgi Djakov <djakov@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm SM7635 SoC
Date: Wed, 25 Jun 2025 10:04:58 -0500 [thread overview]
Message-ID: <20250625150458.GA1182597-robh@kernel.org> (raw)
In-Reply-To: <20250625-sm7635-icc-v1-1-8b49200416b0@fairphone.com>
On Wed, Jun 25, 2025 at 11:13:47AM +0200, Luca Weiss wrote:
> Document the RPMh Network-On-Chip Interconnect of the SM7635 platform.
>
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
> .../bindings/interconnect/qcom,sm7635-rpmh.yaml | 136 ++++++++++++++++++++
> .../dt-bindings/interconnect/qcom,sm7635-rpmh.h | 141 +++++++++++++++++++++
> 2 files changed, 277 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm7635-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm7635-rpmh.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..6373399542d5728b4a4097876d2c4dffc4482038
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm7635-rpmh.yaml
> @@ -0,0 +1,136 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interconnect/qcom,sm7635-rpmh.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm RPMh Network-On-Chip Interconnect on SM7635
> +
> +maintainers:
> + - Luca Weiss <luca.weiss@fairphone.com>
> +
> +description: |
> + RPMh interconnect providers support system bandwidth requirements through
> + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
> + able to communicate with the BCM through the Resource State Coordinator (RSC)
> + associated with each execution environment. Provider nodes must point to at
> + least one RPMh device child node pertaining to their RSC and each provider
> + can map to multiple RPMh resources.
> +
> + See also:: include/dt-bindings/interconnect/qcom,sm7635-rpmh.h
Don't need double colon. Please fix whatever you blindly copied this
from.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,sm7635-aggre1-noc
> + - qcom,sm7635-aggre2-noc
> + - qcom,sm7635-clk-virt
> + - qcom,sm7635-cnoc-cfg
> + - qcom,sm7635-cnoc-main
> + - qcom,sm7635-gem-noc
> + - qcom,sm7635-lpass-ag-noc
> + - qcom,sm7635-mc-virt
> + - qcom,sm7635-mmss-noc
> + - qcom,sm7635-nsp-noc
> + - qcom,sm7635-pcie-anoc
> + - qcom,sm7635-system-noc
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + minItems: 1
> + maxItems: 2
> +
> +required:
> + - compatible
> +
> +allOf:
> + - $ref: qcom,rpmh-common.yaml#
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sm7635-clk-virt
> + - qcom,sm7635-mc-virt
> + then:
> + properties:
> + reg: false
> + else:
> + required:
> + - reg
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sm7635-pcie-anoc
> + then:
> + properties:
> + clocks:
> + items:
> + - description: aggre-NOC PCIe AXI clock
> + - description: cfg-NOC PCIe a-NOC AHB clock
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sm7635-aggre1-noc
> + then:
> + properties:
> + clocks:
> + items:
> + - description: aggre USB3 PRIM AXI clock
> + - description: aggre UFS PHY AXI clock
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sm7635-aggre2-noc
> + then:
> + properties:
> + clocks:
> + items:
> + - description: RPMH CC IPA clock
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,sm7635-aggre1-noc
> + - qcom,sm7635-aggre2-noc
> + - qcom,sm7635-pcie-anoc
> + then:
> + required:
> + - clocks
> + else:
> + properties:
> + clocks: false
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,sm7635-gcc.h>
> +
> + interconnect-0 {
> + compatible = "qcom,sm7635-clk-virt";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + interconnect@16e0000 {
> + compatible = "qcom,sm7635-aggre1-noc";
> + reg = <0x016e0000 0x16400>;
> + #interconnect-cells = <2>;
> + clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> diff --git a/include/dt-bindings/interconnect/qcom,sm7635-rpmh.h b/include/dt-bindings/interconnect/qcom,sm7635-rpmh.h
> new file mode 100644
> index 0000000000000000000000000000000000000000..d963780ddb540825672bc411eb106a298003b09f
> --- /dev/null
> +++ b/include/dt-bindings/interconnect/qcom,sm7635-rpmh.h
> @@ -0,0 +1,141 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
> + */
> +
> +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SM7635_H
> +#define __DT_BINDINGS_INTERCONNECT_QCOM_SM7635_H
> +
> +#define MASTER_QUP_1 0
> +#define MASTER_UFS_MEM 1
> +#define MASTER_USB3_0 2
> +#define SLAVE_A1NOC_SNOC 3
> +
> +#define MASTER_QDSS_BAM 0
> +#define MASTER_QSPI_0 1
> +#define MASTER_QUP_0 2
> +#define MASTER_CRYPTO 3
> +#define MASTER_IPA 4
> +#define MASTER_QDSS_ETR 5
> +#define MASTER_QDSS_ETR_1 6
> +#define MASTER_SDCC_1 7
> +#define MASTER_SDCC_2 8
> +#define SLAVE_A2NOC_SNOC 9
> +
> +#define MASTER_QUP_CORE_0 0
> +#define MASTER_QUP_CORE_1 1
> +#define SLAVE_QUP_CORE_0 2
> +#define SLAVE_QUP_CORE_1 3
> +
> +#define MASTER_CNOC_CFG 0
> +#define SLAVE_AHB2PHY_SOUTH 1
> +#define SLAVE_AHB2PHY_NORTH 2
> +#define SLAVE_CAMERA_CFG 3
> +#define SLAVE_CLK_CTL 4
> +#define SLAVE_RBCPR_CX_CFG 5
> +#define SLAVE_RBCPR_MXA_CFG 6
> +#define SLAVE_CRYPTO_0_CFG 7
> +#define SLAVE_CX_RDPM 8
> +#define SLAVE_GFX3D_CFG 9
> +#define SLAVE_IMEM_CFG 10
> +#define SLAVE_CNOC_MSS 11
> +#define SLAVE_MX_2_RDPM 12
> +#define SLAVE_MX_RDPM 13
> +#define SLAVE_PDM 14
> +#define SLAVE_QDSS_CFG 15
> +#define SLAVE_QSPI_0 16
> +#define SLAVE_QUP_0 17
> +#define SLAVE_QUP_1 18
> +#define SLAVE_SDC1 19
> +#define SLAVE_SDCC_2 20
> +#define SLAVE_TCSR 21
> +#define SLAVE_TLMM 22
> +#define SLAVE_UFS_MEM_CFG 23
> +#define SLAVE_USB3_0 24
> +#define SLAVE_VENUS_CFG 25
> +#define SLAVE_VSENSE_CTRL_CFG 26
> +#define SLAVE_WLAN 27
> +#define SLAVE_CNOC_MNOC_HF_CFG 28
> +#define SLAVE_CNOC_MNOC_SF_CFG 29
> +#define SLAVE_NSP_QTB_CFG 30
> +#define SLAVE_PCIE_ANOC_CFG 31
> +#define SLAVE_WLAN_Q6_THROTTLE_CFG 32
> +#define SLAVE_SERVICE_CNOC_CFG 33
> +#define SLAVE_QDSS_STM 34
> +#define SLAVE_TCU 35
> +
> +#define MASTER_GEM_NOC_CNOC 0
> +#define MASTER_GEM_NOC_PCIE_SNOC 1
> +#define SLAVE_AOSS 2
> +#define SLAVE_DISPLAY_CFG 3
> +#define SLAVE_IPA_CFG 4
> +#define SLAVE_IPC_ROUTER_CFG 5
> +#define SLAVE_PCIE_0_CFG 6
> +#define SLAVE_PCIE_1_CFG 7
> +#define SLAVE_PRNG 8
> +#define SLAVE_TME_CFG 9
> +#define SLAVE_APPSS 10
> +#define SLAVE_CNOC_CFG 11
> +#define SLAVE_DDRSS_CFG 12
> +#define SLAVE_IMEM 13
> +#define SLAVE_PIMEM 14
> +#define SLAVE_SERVICE_CNOC 15
> +#define SLAVE_PCIE_0 16
> +#define SLAVE_PCIE_1 17
> +
> +#define MASTER_GPU_TCU 0
> +#define MASTER_SYS_TCU 1
> +#define MASTER_APPSS_PROC 2
> +#define MASTER_GFX3D 3
> +#define MASTER_LPASS_GEM_NOC 4
> +#define MASTER_MSS_PROC 5
> +#define MASTER_MNOC_HF_MEM_NOC 6
> +#define MASTER_MNOC_SF_MEM_NOC 7
> +#define MASTER_COMPUTE_NOC 8
> +#define MASTER_ANOC_PCIE_GEM_NOC 9
> +#define MASTER_SNOC_GC_MEM_NOC 10
> +#define MASTER_SNOC_SF_MEM_NOC 11
> +#define MASTER_WLAN_Q6 12
> +#define SLAVE_GEM_NOC_CNOC 13
> +#define SLAVE_LLCC 14
> +#define SLAVE_MEM_NOC_PCIE_SNOC 15
> +
> +#define MASTER_LPASS_PROC 0
> +#define SLAVE_LPASS_GEM_NOC 1
> +
> +#define MASTER_LLCC 0
> +#define SLAVE_EBI1 1
> +
> +#define MASTER_CAMNOC_HF 0
> +#define MASTER_CAMNOC_ICP 1
> +#define MASTER_CAMNOC_SF 2
> +#define MASTER_MDP 3
> +#define MASTER_VIDEO 4
> +#define MASTER_CNOC_MNOC_HF_CFG 5
> +#define MASTER_CNOC_MNOC_SF_CFG 6
> +#define SLAVE_MNOC_HF_MEM_NOC 7
> +#define SLAVE_MNOC_SF_MEM_NOC 8
> +#define SLAVE_SERVICE_MNOC_HF 9
> +#define SLAVE_SERVICE_MNOC_SF 10
> +
> +#define MASTER_CDSP_PROC 0
> +#define SLAVE_CDSP_MEM_NOC 1
> +
> +#define MASTER_PCIE_ANOC_CFG 0
> +#define MASTER_PCIE_0 1
> +#define MASTER_PCIE_1 2
> +#define SLAVE_ANOC_PCIE_GEM_NOC 3
> +#define SLAVE_SERVICE_PCIE_ANOC 4
> +
> +#define MASTER_A1NOC_SNOC 0
> +#define MASTER_A2NOC_SNOC 1
> +#define MASTER_APSS_NOC 2
> +#define MASTER_CNOC_SNOC 3
> +#define MASTER_PIMEM 4
> +#define MASTER_GIC 5
> +#define SLAVE_SNOC_GEM_NOC_GC 6
> +#define SLAVE_SNOC_GEM_NOC_SF 7
> +
> +
> +#endif
>
> --
> 2.50.0
>
next prev parent reply other threads:[~2025-06-25 15:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-25 9:13 [PATCH 0/2] Add interconnect driver for SM7635 Luca Weiss
2025-06-25 9:13 ` [PATCH 1/2] dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm SM7635 SoC Luca Weiss
2025-06-25 12:24 ` Rob Herring (Arm)
2025-06-25 15:04 ` Rob Herring [this message]
2025-06-25 9:13 ` [PATCH 2/2] interconnect: qcom: Add SM7635 interconnect provider driver Luca Weiss
2025-06-27 1:28 ` Dmitry Baryshkov
2025-06-27 12:48 ` Konrad Dybcio
2025-07-08 10:28 ` Luca Weiss
2025-07-08 11:31 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250625150458.GA1182597-robh@kernel.org \
--to=robh@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=djakov@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=luca.weiss@fairphone.com \
--cc=phone-devel@vger.kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.