From: Bing Zhao <bingz@nvidia.com>
To: <viacheslavo@nvidia.com>, <matan@nvidia.com>
Cc: <dev@dpdk.org>, <thomas@monjalon.net>, <dsosnowski@nvidia.com>,
<suanmingm@nvidia.com>, <rasland@nvidia.com>
Subject: [PATCH v4 3/5] net/mlx5: allocate and release unique resources for Tx queues
Date: Sun, 29 Jun 2025 20:07:07 +0300 [thread overview]
Message-ID: <20250629170709.69960-4-bingz@nvidia.com> (raw)
In-Reply-To: <20250629170709.69960-1-bingz@nvidia.com>
If the unique umem and MR method is enabled, before starting Tx
queues in device start stage, the memory will be pre-allocated
and the MR will be registered for the Tx queues' usage later.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
---
drivers/net/mlx5/mlx5.h | 4 ++
drivers/net/mlx5/mlx5_trigger.c | 91 +++++++++++++++++++++++++++++++++
2 files changed, 95 insertions(+)
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 285c9ba396..c08894cd03 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -2141,6 +2141,10 @@ struct mlx5_priv {
struct {
uint32_t sq_total_size;
uint32_t cq_total_size;
+ void *umem;
+ void *umem_obj;
+ uint32_t sq_cur_off;
+ uint32_t cq_cur_off;
} consec_tx_mem;
RTE_ATOMIC(uint16_t) shared_refcnt; /* HW steering host reference counter. */
};
diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
index 3aa7d01ee2..00ffb39ecb 100644
--- a/drivers/net/mlx5/mlx5_trigger.c
+++ b/drivers/net/mlx5/mlx5_trigger.c
@@ -1135,6 +1135,89 @@ mlx5_hw_representor_port_allowed_start(struct rte_eth_dev *dev)
#endif
+/*
+ * Allocate TxQs unique umem and register its MR.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int mlx5_dev_allocate_consec_tx_mem(struct rte_eth_dev *dev)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+ size_t alignment;
+ uint32_t total_size;
+ struct mlx5dv_devx_umem *umem_obj = NULL;
+ void *umem_buf = NULL;
+
+ /* Legacy per queue allocation, do nothing here. */
+ if (priv->sh->config.txq_mem_algn == 0)
+ return 0;
+ alignment = (size_t)(1U << priv->sh->config.txq_mem_algn);
+ total_size = priv->consec_tx_mem.sq_total_size + priv->consec_tx_mem.cq_total_size;
+ /*
+ * Hairpin queues can be skipped later
+ * queue size alignment is bigger than doorbell alignment, no need to align or
+ * round-up again. One queue have two DBs (for CQ + WQ).
+ */
+ total_size += MLX5_DBR_SIZE * priv->txqs_n * 2;
+ umem_buf = mlx5_malloc_numa_tolerant(MLX5_MEM_RTE | MLX5_MEM_ZERO, total_size,
+ alignment, priv->sh->numa_node);
+ if (!umem_buf) {
+ DRV_LOG(ERR, "Failed to allocate consecutive memory for TxQs.");
+ rte_errno = ENOMEM;
+ return -rte_errno;
+ }
+ umem_obj = mlx5_os_umem_reg(priv->sh->cdev->ctx, (void *)(uintptr_t)umem_buf,
+ total_size, IBV_ACCESS_LOCAL_WRITE);
+ if (!umem_obj) {
+ DRV_LOG(ERR, "Failed to register unique umem for all SQs.");
+ rte_errno = errno;
+ if (umem_buf)
+ mlx5_free(umem_buf);
+ return -rte_errno;
+ }
+ priv->consec_tx_mem.umem = umem_buf;
+ priv->consec_tx_mem.sq_cur_off = 0;
+ priv->consec_tx_mem.cq_cur_off = priv->consec_tx_mem.sq_total_size;
+ priv->consec_tx_mem.umem_obj = umem_obj;
+ DRV_LOG(DEBUG, "Allocated umem %p with size %u for %u queues with sq_len %u,"
+ " cq_len %u and registered object %p on port %u",
+ umem_buf, total_size, priv->txqs_n, priv->consec_tx_mem.sq_total_size,
+ priv->consec_tx_mem.cq_total_size, (void *)umem_obj, dev->data->port_id);
+ return 0;
+}
+
+/*
+ * Release TxQs unique umem and register its MR.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param on_stop
+ * If this is on device stop stage.
+ */
+static void mlx5_dev_free_consec_tx_mem(struct rte_eth_dev *dev, bool on_stop)
+{
+ struct mlx5_priv *priv = dev->data->dev_private;
+
+ if (priv->consec_tx_mem.umem_obj) {
+ mlx5_os_umem_dereg(priv->consec_tx_mem.umem_obj);
+ priv->consec_tx_mem.umem_obj = NULL;
+ }
+ if (priv->consec_tx_mem.umem) {
+ mlx5_free(priv->consec_tx_mem.umem);
+ priv->consec_tx_mem.umem = NULL;
+ }
+ /* Queues information will not be reset. */
+ if (on_stop) {
+ /* Reset to 0s for re-setting up queues. */
+ priv->consec_tx_mem.sq_cur_off = 0;
+ priv->consec_tx_mem.cq_cur_off = 0;
+ }
+}
+
/**
* DPDK callback to start the device.
*
@@ -1225,6 +1308,12 @@ mlx5_dev_start(struct rte_eth_dev *dev)
if (ret)
goto error;
}
+ ret = mlx5_dev_allocate_consec_tx_mem(dev);
+ if (ret) {
+ DRV_LOG(ERR, "port %u Tx queues memory allocation failed: %s",
+ dev->data->port_id, strerror(rte_errno));
+ goto error;
+ }
ret = mlx5_txq_start(dev);
if (ret) {
DRV_LOG(ERR, "port %u Tx queue allocation failed: %s",
@@ -1358,6 +1447,7 @@ mlx5_dev_start(struct rte_eth_dev *dev)
mlx5_rxq_stop(dev);
if (priv->obj_ops.lb_dummy_queue_release)
priv->obj_ops.lb_dummy_queue_release(dev);
+ mlx5_dev_free_consec_tx_mem(dev, false);
mlx5_txpp_stop(dev); /* Stop last. */
rte_errno = ret; /* Restore rte_errno. */
return -rte_errno;
@@ -1470,6 +1560,7 @@ mlx5_dev_stop(struct rte_eth_dev *dev)
priv->sh->port[priv->dev_port - 1].nl_ih_port_id = RTE_MAX_ETHPORTS;
mlx5_txq_stop(dev);
mlx5_rxq_stop(dev);
+ mlx5_dev_free_consec_tx_mem(dev, true);
if (priv->obj_ops.lb_dummy_queue_release)
priv->obj_ops.lb_dummy_queue_release(dev);
mlx5_txpp_stop(dev);
--
2.34.1
next prev parent reply other threads:[~2025-06-29 17:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20250623173524.128125-1:x-bingz@nvidia.com>
2025-06-23 18:34 ` [PATCH v2 0/3] Use consecutive Tx queues' memory Bing Zhao
2025-06-23 18:34 ` [PATCH v2 1/3] net/mlx5: fix the WQE size calculation for Tx queue Bing Zhao
2025-06-23 18:34 ` [PATCH v2 2/3] net/mlx5: add new devarg for Tx queue consecutive memory Bing Zhao
2025-06-24 12:01 ` Stephen Hemminger
2025-06-26 13:18 ` Bing Zhao
2025-06-26 14:29 ` Stephen Hemminger
2025-06-26 15:21 ` Thomas Monjalon
2025-06-23 18:34 ` [PATCH v2 3/3] net/mlx5: use consecutive memory for all Tx queues Bing Zhao
2025-06-27 16:37 ` [PATCH v3 0/5] Use consecutive Tx queues' memory Bing Zhao
2025-06-27 16:37 ` [PATCH v3 1/5] net/mlx5: add new devarg for Tx queue consecutive memory Bing Zhao
2025-06-27 16:37 ` [PATCH v3 2/5] net/mlx5: calculate the memory length for all Tx queues Bing Zhao
2025-06-27 16:37 ` [PATCH v3 3/5] net/mlx5: allocate and release unique resources for " Bing Zhao
2025-06-27 16:37 ` [PATCH v3 4/5] net/mlx5: pass the information in Tx queue start Bing Zhao
2025-06-27 16:37 ` [PATCH v3 5/5] net/mlx5: use consecutive memory for Tx queue creation Bing Zhao
2025-06-29 17:07 ` [PATCH v4 0/5] Use consecutive Tx queues' memory Bing Zhao
2025-06-29 17:07 ` [PATCH v4 1/5] net/mlx5: add new devarg for Tx queue consecutive memory Bing Zhao
2025-06-29 17:07 ` [PATCH v4 2/5] net/mlx5: calculate the memory length for all Tx queues Bing Zhao
2025-06-29 17:07 ` Bing Zhao [this message]
2025-06-29 17:07 ` [PATCH v4 4/5] net/mlx5: pass the information in Tx queue start Bing Zhao
2025-06-29 17:07 ` [PATCH v4 5/5] net/mlx5: use consecutive memory for Tx queue creation Bing Zhao
2025-06-27 8:25 ` [PATCH] net/mlx5: fix the WQE size calculation for Tx queue Bing Zhao
2025-06-27 9:27 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250629170709.69960-4-bingz@nvidia.com \
--to=bingz@nvidia.com \
--cc=dev@dpdk.org \
--cc=dsosnowski@nvidia.com \
--cc=matan@nvidia.com \
--cc=rasland@nvidia.com \
--cc=suanmingm@nvidia.com \
--cc=thomas@monjalon.net \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.