[PATCH 0/3] Add support for Mayqueen Pixpaper e-ink panel

[LiangCheng Wang <zaq14760@gmail.com>]

This patch series adds support for the Mayqueen Pixpaper e-ink display panel,
controlled via SPI.

The series includes:
- A new vendor-prefix entry for "mayqueen"
- Device tree binding documentation for the Pixpaper panel
- A DRM tiny driver implementation for the Pixpaper panel
- A MAINTAINERS entry for the Pixpaper DRM driver and binding

The panel supports 122x250 resolution with XRGB8888 format and uses SPI,
along with GPIO lines for reset, busy, and data/command control.

The driver has been tested on:
- Raspberry Pi 2 Model B
with Linux kernel 6.16.

Feedback is welcome.

Best regards,  
LiangCheng Wang  
<zaq14760@gmail.com>

Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
---
LiangCheng Wang (2):
      drm: tiny: Add support for Mayqueen Pixpaper e-ink panel
      dt-bindings: display: Add Mayqueen Pixpaper e-ink panel

Wig Cheng (1):
      dt-bindings: vendor-prefixes: Add Mayqueen name

 .../bindings/display/mayqueen,pixpaper.yaml        |  63 ++
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 MAINTAINERS                                        |   6 +
 drivers/gpu/drm/tiny/Kconfig                       |  15 +
 drivers/gpu/drm/tiny/Makefile                      |   1 +
 drivers/gpu/drm/tiny/pixpaper.c                    | 784 +++++++++++++++++++++
 6 files changed, 871 insertions(+)
---
base-commit: d7b8f8e20813f0179d8ef519541a3527e7661d3a
change-id: 20250708-drm-6021df0715d7

Best regards,
-- 
LiangCheng Wang <zaq14760@gmail.com>