From: Jakub Kicinski <kuba@kernel.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, edumazet@google.com, pabeni@redhat.com,
andrew+netdev@lunn.ch, horms@kernel.org, donald.hunter@gmail.com,
shuah@kernel.org, kory.maincent@bootlin.com,
maxime.chevallier@bootlin.com, sdf@fomichev.me,
ecree.xilinx@gmail.com, gal@nvidia.com,
Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH net-next 11/11] selftests: drv-net: rss_api: test input-xfrm and hash fields
Date: Thu, 10 Jul 2025 18:53:03 -0700 [thread overview]
Message-ID: <20250711015303.3688717-12-kuba@kernel.org> (raw)
In-Reply-To: <20250711015303.3688717-1-kuba@kernel.org>
Test configuring input-xfrm and hash fields with all the limitations.
Tested on mlx5 (CX6):
# ./ksft-net-drv/drivers/net/hw/rss_api.py
TAP version 13
1..10
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
ok 8 rss_api.test_rxfh_fields_set
ok 9 rss_api.test_rxfh_fields_set_xfrm
ok 10 rss_api.test_rxfh_fields_ntf
# Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
| 136 ++++++++++++++++++
1 file changed, 136 insertions(+)
--git a/tools/testing/selftests/drivers/net/hw/rss_api.py b/tools/testing/selftests/drivers/net/hw/rss_api.py
index a0f3f9937de8..c15690043dfd 100755
--- a/tools/testing/selftests/drivers/net/hw/rss_api.py
+++ b/tools/testing/selftests/drivers/net/hw/rss_api.py
@@ -243,6 +243,142 @@ from lib.py import NetDrvEnv
comment="Config for " + fl_type)
+def test_rxfh_fields_set(cfg):
+ """ Test configuring Rx Flow Hash over Netlink. """
+
+ flow_types = ["tcp4", "tcp6", "udp4", "udp6"]
+
+ # Collect current settings
+ cfg_old = cfg.ethnl.rss_get({"header": {"dev-index": cfg.ifindex}})
+ defer(cfg.ethnl.rss_set,
+ {
+ "header": {"dev-index": cfg.ifindex},
+ "input-xfrm": cfg_old.get("input-xfrm", 0),
+ "flow-hash": cfg_old["flow-hash"],
+ }
+ )
+
+ # symmetric hashing prevents some of the configs below
+ if cfg_old.get("input-xfrm", None):
+ cfg.ethnl.rss_set({"header": {"dev-index": cfg.ifindex},
+ "input-xfrm": 0})
+
+ for fl_type in flow_types:
+ cur = _ethtool_get_cfg(cfg, fl_type)
+ if cur == "sdfn":
+ change_nl = {"ip-src", "ip-dst"}
+ change_ic = "sd"
+ else:
+ change_nl = {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}
+ change_ic = "sdfn"
+
+ cfg.ethnl.rss_set({
+ "header": {"dev-index": cfg.ifindex},
+ "flow-hash": {fl_type: change_nl}
+ })
+ reset = defer(ethtool, f"--disable-netlink -N {cfg.ifname} "
+ f"rx-flow-hash {fl_type} {cur}")
+
+ cfg_nl = cfg.ethnl.rss_get({"header": {"dev-index": cfg.ifindex}})
+ ksft_eq(change_nl, cfg_nl["flow-hash"][fl_type],
+ comment=f"Config for {fl_type} over Netlink")
+ cfg_ic = _ethtool_get_cfg(cfg, fl_type)
+ ksft_eq(change_ic, cfg_ic,
+ comment=f"Config for {fl_type} over IOCTL")
+
+ reset.exec()
+ cfg_nl = cfg.ethnl.rss_get({"header": {"dev-index": cfg.ifindex}})
+ ksft_eq(cfg_old["flow-hash"][fl_type], cfg_nl["flow-hash"][fl_type],
+ comment=f"Un-config for {fl_type} over Netlink")
+ cfg_ic = _ethtool_get_cfg(cfg, fl_type)
+ ksft_eq(cur, cfg_ic, comment=f"Un-config for {fl_type} over IOCTL")
+
+ # Try to set multiple at once, the defer was already installed at the start
+ change = {"ip-src"}
+ if change == cfg_old["flow-hash"]["tcp4"]:
+ change = {"ip-dst"}
+ cfg.ethnl.rss_set({
+ "header": {"dev-index": cfg.ifindex},
+ "flow-hash": {x: change for x in flow_types}
+ })
+
+ cfg_nl = cfg.ethnl.rss_get({"header": {"dev-index": cfg.ifindex}})
+ for fl_type in flow_types:
+ ksft_eq(change, cfg_nl["flow-hash"][fl_type],
+ comment=f"multi-config for {fl_type} over Netlink")
+
+
+def test_rxfh_fields_set_xfrm(cfg):
+ """ Test changing Rx Flow Hash vs xfrm_input at once. """
+
+ def set_rss(cfg, xfrm, fh):
+ cfg.ethnl.rss_set({"header": {"dev-index": cfg.ifindex},
+ "input-xfrm": xfrm, "flow-hash": fh})
+
+ # Install the reset handler
+ cfg_old = cfg.ethnl.rss_get({"header": {"dev-index": cfg.ifindex}})
+ defer(set_rss, cfg, cfg_old.get("input-xfrm", 0),
+ cfg_old.get("flow-hash", {}))
+
+ # Make sure we start with input-xfrm off, and tcp4 config non-sym
+ set_rss(cfg, 0, {})
+ set_rss(cfg, 0, {"tcp4": {"ip-src"}})
+
+ # Setting sym and fixing tcp4 config not expected to pass right now
+ with ksft_raises(NlError):
+ set_rss(cfg, "sym-xor", {"tcp4": {"ip-src", "ip-dst"}})
+ # One at a time should work, hopefully
+ set_rss(cfg, 0, {"tcp4": {"ip-src", "ip-dst"}})
+ no_support = False
+ try:
+ set_rss(cfg, "sym-xor", {})
+ except NlError:
+ try:
+ set_rss(cfg, "sym-or-xor", {})
+ except NlError:
+ no_support = True
+ if no_support:
+ raise KsftSkipEx("no input-xfrm supported")
+ # Disabling two at once should not work either without kernel changes
+ with ksft_raises(NlError):
+ set_rss(cfg, 0, {"tcp4": {"ip-src"}})
+
+
+def test_rxfh_fields_ntf(cfg):
+ """ Test Rx Flow Hash notifications. """
+
+ cur = _ethtool_get_cfg(cfg, "tcp4")
+ if cur == "sdfn":
+ change = {"ip-src", "ip-dst"}
+ else:
+ change = {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}
+
+ ethnl = EthtoolFamily()
+ ethnl.ntf_subscribe("monitor")
+
+ ethnl.rss_set({
+ "header": {"dev-index": cfg.ifindex},
+ "flow-hash": {"tcp4": change}
+ })
+ reset = defer(ethtool,
+ f"--disable-netlink -N {cfg.ifname} rx-flow-hash tcp4 {cur}")
+
+ ntf = next(ethnl.poll_ntf(duration=0.2), None)
+ if ntf is None:
+ raise KsftFailEx("No notification received after IOCTL change")
+ ksft_eq(ntf["name"], "rss-ntf")
+ ksft_eq(ntf["msg"]["flow-hash"]["tcp4"], change)
+ ksft_eq(next(ethnl.poll_ntf(duration=0.01), None), None)
+
+ reset.exec()
+ ntf = next(ethnl.poll_ntf(duration=0.2), None)
+ if ntf is None:
+ raise KsftFailEx("No notification received after Netlink change")
+ ksft_eq(ntf["name"], "rss-ntf")
+ ksft_ne(ntf["msg"]["flow-hash"]["tcp4"], change)
+ ksft_eq(next(ethnl.poll_ntf(duration=0.01), None), None)
+
+
def main() -> None:
""" Ksft boiler plate main """
--
2.50.1
next prev parent reply other threads:[~2025-07-11 1:53 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-11 1:52 [PATCH net-next 00/11] ethtool: rss: support RSS_SET via Netlink Jakub Kicinski
2025-07-11 1:52 ` [PATCH net-next 01/11] ethtool: rss: initial RSS_SET (indirection table handling) Jakub Kicinski
2025-07-13 11:08 ` Gal Pressman
2025-07-14 16:15 ` Jakub Kicinski
2025-07-11 1:52 ` [PATCH net-next 02/11] selftests: drv-net: rss_api: factor out checking min queue count Jakub Kicinski
2025-07-11 1:52 ` [PATCH net-next 03/11] tools: ynl: support packing binary arrays of scalars Jakub Kicinski
2025-07-11 1:52 ` [PATCH net-next 04/11] selftests: drv-net: rss_api: test setting indirection table via Netlink Jakub Kicinski
2025-07-14 22:19 ` Edward Cree
2025-07-14 22:28 ` Jakub Kicinski
2025-07-11 1:52 ` [PATCH net-next 05/11] ethtool: rss: support setting hfunc " Jakub Kicinski
2025-07-13 11:10 ` Gal Pressman
2025-07-14 16:21 ` Jakub Kicinski
2025-07-15 6:32 ` Gal Pressman
2025-07-11 1:52 ` [PATCH net-next 06/11] ethtool: rss: support setting hkey " Jakub Kicinski
2025-07-13 11:10 ` Gal Pressman
2025-07-11 1:52 ` [PATCH net-next 07/11] selftests: drv-net: rss_api: test setting hashing key " Jakub Kicinski
2025-07-11 1:53 ` [PATCH net-next 08/11] netlink: specs: define input-xfrm enum in the spec Jakub Kicinski
2025-07-13 13:20 ` Gal Pressman
2025-07-11 1:53 ` [PATCH net-next 09/11] ethtool: rss: support setting input-xfrm via Netlink Jakub Kicinski
2025-07-13 11:11 ` Gal Pressman
2025-07-14 16:27 ` Jakub Kicinski
2025-07-11 1:53 ` [PATCH net-next 10/11] ethtool: rss: support setting flow hashing fields Jakub Kicinski
2025-07-13 11:12 ` Gal Pressman
2025-07-14 16:29 ` Jakub Kicinski
2025-07-15 10:27 ` Gal Pressman
2025-07-15 14:50 ` Jakub Kicinski
2025-07-11 1:53 ` Jakub Kicinski [this message]
2025-07-13 14:05 ` [PATCH net-next 11/11] selftests: drv-net: rss_api: test input-xfrm and hash fields Gal Pressman
2025-07-14 16:31 ` Jakub Kicinski
2025-07-13 11:06 ` [PATCH net-next 00/11] ethtool: rss: support RSS_SET via Netlink Gal Pressman
2025-07-14 16:35 ` Jakub Kicinski
2025-07-15 6:33 ` Gal Pressman
2025-07-15 14:53 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250711015303.3688717-12-kuba@kernel.org \
--to=kuba@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=donald.hunter@gmail.com \
--cc=ecree.xilinx@gmail.com \
--cc=edumazet@google.com \
--cc=gal@nvidia.com \
--cc=horms@kernel.org \
--cc=kory.maincent@bootlin.com \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sdf@fomichev.me \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.