All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: qemu-devel@nongnu.org, Fan Ni <fan.ni@samsung.com>,
	linux-cxl@vger.kernel.org, linuxarm@huawei.com
Subject: Re: [PATCH qemu 07/11] hw/cxl: mailbox-utils: 0x5602 - FMAPI Set DC Region Config
Date: Mon, 14 Jul 2025 05:32:19 -0400	[thread overview]
Message-ID: <20250714052757-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20250702160219.989731-8-Jonathan.Cameron@huawei.com>

On Wed, Jul 02, 2025 at 05:02:13PM +0100, Jonathan Cameron wrote:
> From: Anisa Su <anisa.su@samsung.com>
> 
> FM DCD Management command 0x5602 implemented per CXL r3.2 Spec Section 7.6.7.6.3
> 
> Reviewed-by: Fan Ni <fan.ni@samsung.com>
> Signed-off-by: Anisa Su <anisa.su@samsung.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
>  include/hw/cxl/cxl_device.h  |  3 ++
>  include/hw/cxl/cxl_mailbox.h |  6 +++
>  hw/cxl/cxl-mailbox-utils.c   | 86 ++++++++++++++++++++++++++++++++++++
>  hw/mem/cxl_type3.c           |  6 +--
>  4 files changed, 98 insertions(+), 3 deletions(-)
> 
> diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> index 96ef9be444..76af75d2d0 100644
> --- a/include/hw/cxl/cxl_device.h
> +++ b/include/hw/cxl/cxl_device.h
> @@ -721,4 +721,7 @@ void ct3_clear_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
>                                     uint64_t len);
>  bool ct3_test_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
>                                    uint64_t len);
> +void cxl_assign_event_header(CXLEventRecordHdr *hdr,
> +                             const QemuUUID *uuid, uint32_t flags,
> +                             uint8_t length, uint64_t timestamp);
>  #endif
> diff --git a/include/hw/cxl/cxl_mailbox.h b/include/hw/cxl/cxl_mailbox.h
> index 9008402d1c..a05d7cb5b7 100644
> --- a/include/hw/cxl/cxl_mailbox.h
> +++ b/include/hw/cxl/cxl_mailbox.h
> @@ -8,6 +8,7 @@
>  #ifndef CXL_MAILBOX_H
>  #define CXL_MAILBOX_H
>  
> +#define CXL_MBOX_CONFIG_CHANGE_COLD_RESET (1)
>  #define CXL_MBOX_IMMEDIATE_CONFIG_CHANGE (1 << 1)
>  #define CXL_MBOX_IMMEDIATE_DATA_CHANGE (1 << 2)
>  #define CXL_MBOX_IMMEDIATE_POLICY_CHANGE (1 << 3)
> @@ -15,5 +16,10 @@
>  #define CXL_MBOX_SECURITY_STATE_CHANGE (1 << 5)
>  #define CXL_MBOX_BACKGROUND_OPERATION (1 << 6)
>  #define CXL_MBOX_BACKGROUND_OPERATION_ABORT (1 << 7)
> +#define CXL_MBOX_SECONDARY_MBOX_SUPPORTED (1 << 8)
> +#define CXL_MBOX_REQUEST_ABORT_BACKGROUND_OP_SUPPORTED (1 << 9)
> +#define CXL_MBOX_CEL_10_TO_11_VALID (1 << 10)
> +#define CXL_MBOX_CONFIG_CHANGE_CONV_RESET (1 << 11)
> +#define CXL_MBOX_CONFIG_CHANGE_CXL_RESET (1 << 12)
>  
>  #endif
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index bf1710b251..1fc453f70d 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -121,6 +121,7 @@ enum {
>      FMAPI_DCD_MGMT = 0x56,
>          #define GET_DCD_INFO    0x0
>          #define GET_HOST_DC_REGION_CONFIG   0x1
> +        #define SET_DC_REGION_CONFIG        0x2
>  };
>  
>  /* CCI Message Format CXL r3.1 Figure 7-19 */
> @@ -3390,6 +3391,84 @@ static CXLRetCode cmd_fm_get_host_dc_region_config(const struct cxl_cmd *cmd,
>      return CXL_MBOX_SUCCESS;
>  }
>  
> +/* CXL r3.2 section 7.6.7.6.3: Set Host DC Region Configuration (Opcode 5602) */
> +static CXLRetCode cmd_fm_set_dc_region_config(const struct cxl_cmd *cmd,
> +                                              uint8_t *payload_in,
> +                                              size_t len_in,
> +                                              uint8_t *payload_out,
> +                                              size_t *len_out,
> +                                              CXLCCI *cci)
> +{
> +    struct {
> +        uint8_t reg_id;
> +        uint8_t rsvd[3];
> +        uint64_t block_sz;
> +        uint8_t flags;
> +        uint8_t rsvd2[3];
> +    } QEMU_PACKED *in = (void *)payload_in;
> +    CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
> +    CXLEventDynamicCapacity dcEvent = {};
> +    CXLDCRegion *region = &ct3d->dc.regions[in->reg_id];
> +
> +    /*
> +     * CXL r3.2 7.6.7.6.3: Set DC Region Configuration
> +     * This command shall fail with Unsupported when the Sanitize on Release
> +     * field does not match the region’s configuration... and the device
> +     * does not support reconfiguration of the Sanitize on Release setting.
> +     *
> +     * Currently not reconfigurable, so always fail if sanitize bit (bit 0)
> +     * doesn't match.
> +     */
> +    if ((in->flags & 0x1) != (region->flags & 0x1)) {
> +        return CXL_MBOX_UNSUPPORTED;
> +    }
> +
> +    if (in->reg_id >= DCD_MAX_NUM_REGION) {
> +        return CXL_MBOX_UNSUPPORTED;
> +    }
> +
> +    /* Check that no extents are in the region being reconfigured */
> +    if (!bitmap_empty(region->blk_bitmap, region->len / region->block_size)) {
> +        return CXL_MBOX_UNSUPPORTED;
> +    }
> +
> +    /* Check that new block size is supported */
> +    if (!test_bit(BIT((int) log2(in->block_sz)),
> +                  &region->supported_blk_size_bitmask)) {
> +        return CXL_MBOX_INVALID_INPUT;
> +    }

This does not work: test_bit works on unsigned long, while
supported_blk_size_bitmask is uint64_t.

Why so funky? what is wrong with:

if (!(BIT_ULL(log2(in->block_sz)) & region->supported_blk_size_bitmask))

And BTW why cast to int here?


> +
> +    /* Return success if new block size == current block size */
> +    if (in->block_sz == region->block_size) {
> +        return CXL_MBOX_SUCCESS;
> +    }
> +
> +    /* Free bitmap and create new one for new block size. */
> +    qemu_mutex_lock(&region->bitmap_lock);
> +    g_free(region->blk_bitmap);
> +    region->blk_bitmap = bitmap_new(region->len / in->block_sz);
> +    qemu_mutex_unlock(&region->bitmap_lock);
> +    region->block_size = in->block_sz;
> +
> +    /* Create event record and insert into event log */
> +    cxl_assign_event_header(&dcEvent.hdr,
> +                            &dynamic_capacity_uuid,
> +                            (1 << CXL_EVENT_TYPE_INFO),
> +                            sizeof(dcEvent),
> +                            cxl_device_get_timestamp(&ct3d->cxl_dstate));
> +    dcEvent.type = DC_EVENT_REGION_CONFIG_UPDATED;
> +    dcEvent.validity_flags = 1;
> +    dcEvent.host_id = 0;
> +    dcEvent.updated_region_id = in->reg_id;
> +
> +    if (cxl_event_insert(&ct3d->cxl_dstate,
> +                         CXL_EVENT_TYPE_DYNAMIC_CAP,
> +                         (CXLEventRecordRaw *)&dcEvent)) {
> +        cxl_event_irq_assert(ct3d);
> +    }
> +    return CXL_MBOX_SUCCESS;
> +}
> +
>  static const struct cxl_cmd cxl_cmd_set[256][256] = {
>      [INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
>          cmd_infostat_bg_op_abort, 0, 0 },
> @@ -3508,6 +3587,13 @@ static const struct cxl_cmd cxl_cmd_set_fm_dcd[256][256] = {
>          cmd_fm_get_dcd_info, 0, 0 },
>      [FMAPI_DCD_MGMT][GET_HOST_DC_REGION_CONFIG] = { "GET_HOST_DC_REGION_CONFIG",
>          cmd_fm_get_host_dc_region_config, 4, 0 },
> +    [FMAPI_DCD_MGMT][SET_DC_REGION_CONFIG] = { "SET_DC_REGION_CONFIG",
> +        cmd_fm_set_dc_region_config, 16,
> +        (CXL_MBOX_CONFIG_CHANGE_COLD_RESET |
> +         CXL_MBOX_CONFIG_CHANGE_CONV_RESET |
> +         CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
> +         CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
> +         CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
>  };
>  
>  /*
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> index b872a26173..ee554a77be 100644
> --- a/hw/mem/cxl_type3.c
> +++ b/hw/mem/cxl_type3.c
> @@ -1590,9 +1590,9 @@ void qmp_cxl_inject_correctable_error(const char *path, CxlCorErrorType type,
>      pcie_aer_inject_error(PCI_DEVICE(obj), &err);
>  }
>  
> -static void cxl_assign_event_header(CXLEventRecordHdr *hdr,
> -                                    const QemuUUID *uuid, uint32_t flags,
> -                                    uint8_t length, uint64_t timestamp)
> +void cxl_assign_event_header(CXLEventRecordHdr *hdr,
> +                             const QemuUUID *uuid, uint32_t flags,
> +                             uint8_t length, uint64_t timestamp)
>  {
>      st24_le_p(&hdr->flags, flags);
>      hdr->length = length;
> -- 
> 2.48.1


  reply	other threads:[~2025-07-14  9:32 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-02 16:02 [PATCH qemu 00/11] hw/cxl: DCD Fabric Management Command Set (for 10.1) Jonathan Cameron
2025-07-02 16:02 ` Jonathan Cameron via
2025-07-02 16:02 ` [PATCH qemu 01/11] hw/cxl: fix DC extent capacity tracking Jonathan Cameron
2025-07-02 16:02   ` Jonathan Cameron via
2025-07-02 16:02 ` [PATCH qemu 02/11] hw/cxl: mailbox-utils: 0x5600 - FMAPI Get DCD Info Jonathan Cameron
2025-07-02 16:02   ` Jonathan Cameron via
2025-07-02 16:02 ` [PATCH qemu 03/11] hw/mem: cxl_type3: Add dsmas_flags to CXLDCRegion struct Jonathan Cameron
2025-07-02 16:02   ` Jonathan Cameron via
2025-07-02 16:02 ` [PATCH qemu 04/11] hw/cxl: mailbox-utils: 0x5601 - FMAPI Get Host Region Config Jonathan Cameron
2025-07-02 16:02   ` Jonathan Cameron via
2025-07-02 16:02 ` [PATCH qemu 05/11] hw/cxl: Move definition for dynamic_capacity_uuid and enum for DC event types to header Jonathan Cameron
2025-07-02 16:02   ` Jonathan Cameron via
2025-07-02 16:02 ` [PATCH qemu 06/11] hw/mem: cxl_type3: Add DC Region bitmap lock Jonathan Cameron
2025-07-02 16:02   ` Jonathan Cameron via
2025-07-02 16:02 ` [PATCH qemu 07/11] hw/cxl: mailbox-utils: 0x5602 - FMAPI Set DC Region Config Jonathan Cameron
2025-07-02 16:02   ` Jonathan Cameron via
2025-07-14  9:32   ` Michael S. Tsirkin [this message]
2025-07-14 14:02     ` Jonathan Cameron
2025-07-14 14:02       ` Jonathan Cameron via
2025-07-14 14:15       ` Jonathan Cameron
2025-07-14 14:15         ` Jonathan Cameron via
2025-07-14 14:16         ` Jonathan Cameron
2025-07-14 14:16           ` Jonathan Cameron via
2025-07-14 16:45           ` Fan Ni
2025-07-14 17:02             ` Jonathan Cameron
2025-07-14 17:02               ` Jonathan Cameron via
2025-07-14 17:21               ` Anisa Su
2025-07-14 17:28                 ` Jonathan Cameron
2025-07-14 17:28                   ` Jonathan Cameron via
2025-07-02 16:02 ` [PATCH qemu 08/11] hw/cxl: mailbox-utils: 0x5603 - FMAPI Get DC Region Extent Lists Jonathan Cameron
2025-07-02 16:02   ` Jonathan Cameron via
2025-07-02 16:02 ` [PATCH qemu 09/11] hw/cxl: Create helper function to create DC Event Records from extents Jonathan Cameron
2025-07-02 16:02   ` Jonathan Cameron via
2025-07-03 16:21   ` Fan Ni
2025-07-02 16:02 ` [PATCH qemu 10/11] hw/cxl: mailbox-utils: 0x5604 - FMAPI Initiate DC Add Jonathan Cameron
2025-07-02 16:02   ` Jonathan Cameron via
2025-07-03 16:23   ` Fan Ni
2025-07-04  8:12     ` Jonathan Cameron
2025-07-04  8:12       ` Jonathan Cameron via
2025-07-02 16:02 ` [PATCH qemu 11/11] hw/cxl: mailbox-utils: 0x5605 - FMAPI Initiate DC Release Jonathan Cameron
2025-07-02 16:02   ` Jonathan Cameron via
2025-07-03 16:24   ` Fan Ni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250714052757-mutt-send-email-mst@kernel.org \
    --to=mst@redhat.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=fan.ni@samsung.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.