All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,ziy@nvidia.com,yangyicong@hisilicon.com,yang@os.amperecomputing.com,willy@infradead.org,will@kernel.org,vbabka@suse.cz,ryan.roberts@arm.com,quic_zhenhuah@quicinc.com,peterx@redhat.com,lorenzo.stoakes@oracle.com,liam.howlett@oracle.com,kevin.brodsky@arm.com,joey.gouly@arm.com,jannh@google.com,ioworker0@gmail.com,hughd@google.com,david@redhat.com,christophe.leroy@csgroup.eu,catalin.marinas@arm.com,baohua@kernel.org,anshuman.khandual@arm.com,dev.jain@arm.com,akpm@linux-foundation.org
Subject: + mm-add-batched-versions-of-ptep_modify_prot_start-commit.patch added to mm-new branch
Date: Sat, 19 Jul 2025 17:18:23 -0700	[thread overview]
Message-ID: <20250720001824.72398C4CEE3@smtp.kernel.org> (raw)


The patch titled
     Subject: mm: add batched versions of ptep_modify_prot_start/commit
has been added to the -mm mm-new branch.  Its filename is
     mm-add-batched-versions-of-ptep_modify_prot_start-commit.patch

This patch will shortly appear at
     https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/mm-add-batched-versions-of-ptep_modify_prot_start-commit.patch

This patch will later appear in the mm-new branch at
    git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Note, mm-new is a provisional staging ground for work-in-progress
patches, and acceptance into mm-new is a notification for others take
notice and to finish up reviews.  Please do not hesitate to respond to
review feedback and post updated versions to replace or incrementally
fixup patches in mm-new.

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***

The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days

------------------------------------------------------
From: Dev Jain <dev.jain@arm.com>
Subject: mm: add batched versions of ptep_modify_prot_start/commit
Date: Fri, 18 Jul 2025 14:32:40 +0530

Batch ptep_modify_prot_start/commit in preparation for optimizing
mprotect, implementing them as a simple loop over the corresponding single
pte helpers.  Architecture may override these helpers.

Link: https://lkml.kernel.org/r/20250718090244.21092-4-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 include/linux/pgtable.h |   84 +++++++++++++++++++++++++++++++++++++-
 mm/mprotect.c           |    4 -
 2 files changed, 85 insertions(+), 3 deletions(-)

--- a/include/linux/pgtable.h~mm-add-batched-versions-of-ptep_modify_prot_start-commit
+++ a/include/linux/pgtable.h
@@ -1331,7 +1331,9 @@ static inline pte_t ptep_modify_prot_sta
 
 /*
  * Commit an update to a pte, leaving any hardware-controlled bits in
- * the PTE unmodified.
+ * the PTE unmodified. The pte returned from ptep_modify_prot_start() may
+ * additionally have young and/or dirty bits set where previously they were not,
+ * so the updated pte may have these additional changes.
  */
 static inline void ptep_modify_prot_commit(struct vm_area_struct *vma,
 					   unsigned long addr,
@@ -1340,6 +1342,86 @@ static inline void ptep_modify_prot_comm
 	__ptep_modify_prot_commit(vma, addr, ptep, pte);
 }
 #endif /* __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION */
+
+/**
+ * modify_prot_start_ptes - Start a pte protection read-modify-write transaction
+ * over a batch of ptes, which protects against asynchronous hardware
+ * modifications to the ptes. The intention is not to prevent the hardware from
+ * making pte updates, but to prevent any updates it may make from being lost.
+ * Please see the comment above ptep_modify_prot_start() for full description.
+ *
+ * @vma: The virtual memory area the pages are mapped into.
+ * @addr: Address the first page is mapped at.
+ * @ptep: Page table pointer for the first entry.
+ * @nr: Number of entries.
+ *
+ * May be overridden by the architecture; otherwise, implemented as a simple
+ * loop over ptep_modify_prot_start(), collecting the a/d bits from each pte
+ * in the batch.
+ *
+ * Note that PTE bits in the PTE batch besides the PFN can differ.
+ *
+ * Context: The caller holds the page table lock.  The PTEs map consecutive
+ * pages that belong to the same folio. All other PTE bits must be identical for
+ * all PTEs in the batch except for young and dirty bits.  The PTEs are all in
+ * the same PMD.
+ */
+#ifndef modify_prot_start_ptes
+static inline pte_t modify_prot_start_ptes(struct vm_area_struct *vma,
+		unsigned long addr, pte_t *ptep, unsigned int nr)
+{
+	pte_t pte, tmp_pte;
+
+	pte = ptep_modify_prot_start(vma, addr, ptep);
+	while (--nr) {
+		ptep++;
+		addr += PAGE_SIZE;
+		tmp_pte = ptep_modify_prot_start(vma, addr, ptep);
+		if (pte_dirty(tmp_pte))
+			pte = pte_mkdirty(pte);
+		if (pte_young(tmp_pte))
+			pte = pte_mkyoung(pte);
+	}
+	return pte;
+}
+#endif
+
+/**
+ * modify_prot_commit_ptes - Commit an update to a batch of ptes, leaving any
+ * hardware-controlled bits in the PTE unmodified.
+ *
+ * @vma: The virtual memory area the pages are mapped into.
+ * @addr: Address the first page is mapped at.
+ * @ptep: Page table pointer for the first entry.
+ * @old_pte: Old page table entry (for the first entry) which is now cleared.
+ * @pte: New page table entry to be set.
+ * @nr: Number of entries.
+ *
+ * May be overridden by the architecture; otherwise, implemented as a simple
+ * loop over ptep_modify_prot_commit().
+ *
+ * Context: The caller holds the page table lock. The PTEs are all in the same
+ * PMD. On exit, the set ptes in the batch map the same folio. The ptes set by
+ * ptep_modify_prot_start() may additionally have young and/or dirty bits set
+ * where previously they were not, so the updated ptes may have these
+ * additional changes.
+ */
+#ifndef modify_prot_commit_ptes
+static inline void modify_prot_commit_ptes(struct vm_area_struct *vma, unsigned long addr,
+		pte_t *ptep, pte_t old_pte, pte_t pte, unsigned int nr)
+{
+	int i;
+
+	for (i = 0; i < nr; ++i, ++ptep, addr += PAGE_SIZE) {
+		ptep_modify_prot_commit(vma, addr, ptep, old_pte, pte);
+
+		/* Advance PFN only, set same prot */
+		old_pte = pte_next_pfn(old_pte);
+		pte = pte_next_pfn(pte);
+	}
+}
+#endif
+
 #endif /* CONFIG_MMU */
 
 /*
--- a/mm/mprotect.c~mm-add-batched-versions-of-ptep_modify_prot_start-commit
+++ a/mm/mprotect.c
@@ -204,7 +204,7 @@ static long change_pte_range(struct mmu_
 				}
 			}
 
-			oldpte = ptep_modify_prot_start(vma, addr, pte);
+			oldpte = modify_prot_start_ptes(vma, addr, pte, nr_ptes);
 			ptent = pte_modify(oldpte, newprot);
 
 			if (uffd_wp)
@@ -230,7 +230,7 @@ static long change_pte_range(struct mmu_
 			    can_change_pte_writable(vma, addr, ptent))
 				ptent = pte_mkwrite(ptent, vma);
 
-			ptep_modify_prot_commit(vma, addr, pte, oldpte, ptent);
+			modify_prot_commit_ptes(vma, addr, pte, oldpte, ptent, nr_ptes);
 			if (pte_needs_flush(oldpte, ptent))
 				tlb_flush_pte_range(tlb, addr, PAGE_SIZE);
 			pages++;
_

Patches currently in -mm which might be from dev.jain@arm.com are

mm-refactor-mm_cp_prot_numa-skipping-case-into-new-function.patch
mm-optimize-mprotect-for-mm_cp_prot_numa-by-batch-skipping-ptes.patch
mm-add-batched-versions-of-ptep_modify_prot_start-commit.patch
mm-introduce-fpb_respect_write-for-pte-batching-infrastructure.patch
mm-split-can_change_pte_writable-into-private-and-shared-parts.patch
mm-optimize-mprotect-by-pte-batching.patch
arm64-add-batched-versions-of-ptep_modify_prot_start-commit.patch


             reply	other threads:[~2025-07-20  0:18 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-20  0:18 Andrew Morton [this message]
  -- strict thread matches above, loose matches on Subject: below --
2025-06-29 23:06 + mm-add-batched-versions-of-ptep_modify_prot_start-commit.patch added to mm-new branch Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250720001824.72398C4CEE3@smtp.kernel.org \
    --to=akpm@linux-foundation.org \
    --cc=anshuman.khandual@arm.com \
    --cc=baohua@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=christophe.leroy@csgroup.eu \
    --cc=david@redhat.com \
    --cc=dev.jain@arm.com \
    --cc=hughd@google.com \
    --cc=ioworker0@gmail.com \
    --cc=jannh@google.com \
    --cc=joey.gouly@arm.com \
    --cc=kevin.brodsky@arm.com \
    --cc=liam.howlett@oracle.com \
    --cc=lorenzo.stoakes@oracle.com \
    --cc=mm-commits@vger.kernel.org \
    --cc=peterx@redhat.com \
    --cc=quic_zhenhuah@quicinc.com \
    --cc=ryan.roberts@arm.com \
    --cc=vbabka@suse.cz \
    --cc=will@kernel.org \
    --cc=willy@infradead.org \
    --cc=yang@os.amperecomputing.com \
    --cc=yangyicong@hisilicon.com \
    --cc=ziy@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.