From: Johan Hovold <johan@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Thinh Nguyen <Thinh.Nguyen@synopsys.com>, Bin Liu <b-liu@ti.com>
Cc: Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 5/5] usb: musb: omap2430: clean up probe error handling
Date: Thu, 24 Jul 2025 11:19:10 +0200 [thread overview]
Message-ID: <20250724091910.21092-6-johan@kernel.org> (raw)
In-Reply-To: <20250724091910.21092-1-johan@kernel.org>
Using numbered error labels is discouraged (e.g. as it requires
renumbering them when adding a new intermediate error path).
Rename the error labels after what they do.
While at it, drop the redundant platform allocation failure dev_err()
as the error would already have been logged by the allocator.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/musb/omap2430.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 36f756f9b7f6..c35c07b7488c 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -318,13 +318,11 @@ static int omap2430_probe(struct platform_device *pdev)
glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
if (!glue)
- goto err0;
+ return -ENOMEM;
musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
- if (!musb) {
- dev_err(&pdev->dev, "failed to allocate musb device\n");
- goto err0;
- }
+ if (!musb)
+ return -ENOMEM;
musb->dev.parent = &pdev->dev;
musb->dev.dma_mask = &omap2430_dmamask;
@@ -349,15 +347,15 @@ static int omap2430_probe(struct platform_device *pdev)
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
- goto err2;
+ goto err_put_musb;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
- goto err2;
+ goto err_put_musb;
config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
if (!config)
- goto err2;
+ goto err_put_musb;
of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
of_property_read_u32(np, "interface-type",
@@ -380,7 +378,7 @@ static int omap2430_probe(struct platform_device *pdev)
if (!control_pdev) {
dev_err(&pdev->dev, "Failed to get control device\n");
ret = -EINVAL;
- goto err2;
+ goto err_put_musb;
}
glue->control_otghs = &control_pdev->dev;
}
@@ -456,20 +454,19 @@ static int omap2430_probe(struct platform_device *pdev)
ret = platform_device_add(musb);
if (ret) {
dev_err(&pdev->dev, "failed to register musb device\n");
- goto err3;
+ goto err_disable_rpm;
}
return 0;
-err3:
+err_disable_rpm:
pm_runtime_disable(glue->dev);
err_put_control_otghs:
if (!IS_ERR(glue->control_otghs))
put_device(glue->control_otghs);
-err2:
+err_put_musb:
platform_device_put(musb);
-err0:
return ret;
}
--
2.49.1
next prev parent reply other threads:[~2025-07-24 9:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-24 9:19 [PATCH 0/5] USB: fix device leaks at unbind Johan Hovold
2025-07-24 9:19 ` [PATCH 1/5] usb: dwc3: imx8mp: fix device leak " Johan Hovold
2025-07-24 9:19 ` [PATCH 2/5] usb: dwc3: meson-g12a: fix device leaks " Johan Hovold
2025-07-24 20:40 ` Martin Blumenstingl
2025-07-24 9:19 ` [PATCH 3/5] usb: gadget: udc: renesas_usb3: fix device leak " Johan Hovold
2025-07-24 9:19 ` [PATCH 4/5] usb: musb: omap2430: " Johan Hovold
2025-07-30 22:33 ` Kevin Hilman
2025-07-24 9:19 ` Johan Hovold [this message]
2025-07-30 22:33 ` [PATCH 5/5] usb: musb: omap2430: clean up probe error handling Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250724091910.21092-6-johan@kernel.org \
--to=johan@kernel.org \
--cc=Thinh.Nguyen@synopsys.com \
--cc=b-liu@ti.com \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jbrunet@baylibre.com \
--cc=kernel@pengutronix.de \
--cc=khilman@baylibre.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.