From: Jimmy Assarsson <extja@kvaser.com>
To: linux-can@vger.kernel.org
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
netdev@vger.kernel.org
Subject: [PATCH v2 10/11] can: kvaser_usb: Add devlink port support
Date: Thu, 24 Jul 2025 11:25:04 +0200 [thread overview]
Message-ID: <20250724092505.8-11-extja@kvaser.com> (raw)
In-Reply-To: <20250724092505.8-1-extja@kvaser.com>
Register each CAN channel of the device as an devlink physical port.
This makes it easier to get device information for a given network
interface (i.e. can2).
Example output:
$ devlink dev
usb/1-1.3:1.0
$ devlink port
usb/1-1.3:1.0/0: type eth netdev can0 flavour physical port 0 splittable false
usb/1-1.3:1.0/1: type eth netdev can1 flavour physical port 1 splittable false
$ devlink port show can1
usb/1-1.3:1.0/1: type eth netdev can1 flavour physical port 0 splittable false
$ devlink dev info
usb/1-1.3:1.0:
driver kvaser_usb
serial_number 1020
versions:
fixed:
board.rev 1
board.id 7330130009653
running:
fw 3.22.527
$ ethtool -i can1
driver: kvaser_usb
version: 6.12.10-arch1-1
firmware-version: 3.22.527
expansion-rom-version:
bus-info: 1-1.3:1.0
supports-statistics: no
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
---
Changes in v2:
- Add two space indentation to terminal output.
Suggested by Vincent Mailhol [1]
[1] https://lore.kernel.org/linux-can/20250723083236.9-1-extja@kvaser.com/T/#m31ee4aad13ee29d5559b56fdce842609ae4f67c5
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 4 +++
.../net/can/usb/kvaser_usb/kvaser_usb_core.c | 15 ++++++++---
.../can/usb/kvaser_usb/kvaser_usb_devlink.c | 25 +++++++++++++++++++
3 files changed, 41 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
index d5f913ac9b44..46a1b6907a50 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb.h
@@ -131,6 +131,7 @@ struct kvaser_usb {
struct kvaser_usb_net_priv {
struct can_priv can;
+ struct devlink_port devlink_port;
struct can_berr_counter bec;
/* subdriver-specific data */
@@ -229,6 +230,9 @@ extern const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops;
extern const struct devlink_ops kvaser_usb_devlink_ops;
+int kvaser_usb_devlink_port_register(struct kvaser_usb_net_priv *priv);
+void kvaser_usb_devlink_port_unregister(struct kvaser_usb_net_priv *priv);
+
void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv);
int kvaser_usb_recv_cmd(const struct kvaser_usb *dev, void *cmd, int len,
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
index b9b2e120a5cd..90e77fa0ff4a 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
@@ -818,6 +818,7 @@ static void kvaser_usb_remove_interfaces(struct kvaser_usb *dev)
if (ops->dev_remove_channel)
ops->dev_remove_channel(priv);
+ kvaser_usb_devlink_port_unregister(priv);
free_candev(priv->netdev);
}
}
@@ -891,20 +892,28 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)
if (ops->dev_init_channel) {
err = ops->dev_init_channel(priv);
if (err)
- goto err;
+ goto candev_free;
+ }
+
+ err = kvaser_usb_devlink_port_register(priv);
+ if (err) {
+ dev_err(&dev->intf->dev, "Failed to register devlink port\n");
+ goto candev_free;
}
err = register_candev(netdev);
if (err) {
dev_err(&dev->intf->dev, "Failed to register CAN device\n");
- goto err;
+ goto unregister_devlink_port;
}
netdev_dbg(netdev, "device registered\n");
return 0;
-err:
+unregister_devlink_port:
+ kvaser_usb_devlink_port_unregister(priv);
+candev_free:
free_candev(netdev);
dev->nets[channel] = NULL;
return err;
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c
index 3568485a3e84..3728e5d5793a 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c
@@ -4,6 +4,7 @@
* Copyright (C) 2025 KVASER AB, Sweden. All rights reserved.
*/
+#include <linux/netdevice.h>
#include <net/devlink.h>
#include "kvaser_usb.h"
@@ -61,3 +62,27 @@ static int kvaser_usb_devlink_info_get(struct devlink *devlink,
const struct devlink_ops kvaser_usb_devlink_ops = {
.info_get = kvaser_usb_devlink_info_get,
};
+
+int kvaser_usb_devlink_port_register(struct kvaser_usb_net_priv *priv)
+{
+ int ret;
+ struct devlink_port_attrs attrs = {
+ .flavour = DEVLINK_PORT_FLAVOUR_PHYSICAL,
+ .phys.port_number = priv->channel,
+ };
+ devlink_port_attrs_set(&priv->devlink_port, &attrs);
+
+ ret = devlink_port_register(priv_to_devlink(priv->dev),
+ &priv->devlink_port, priv->channel);
+ if (ret)
+ return ret;
+
+ SET_NETDEV_DEVLINK_PORT(priv->netdev, &priv->devlink_port);
+
+ return 0;
+}
+
+void kvaser_usb_devlink_port_unregister(struct kvaser_usb_net_priv *priv)
+{
+ devlink_port_unregister(&priv->devlink_port);
+}
--
2.49.0
next prev parent reply other threads:[~2025-07-24 9:25 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-24 9:24 [PATCH v2 00/11] can: kvaser_usb: Simplify identification of physical CAN interfaces Jimmy Assarsson
2025-07-24 9:24 ` [PATCH v2 01/11] can: kvaser_usb: Add support to control CAN LEDs on device Jimmy Assarsson
2025-07-24 18:26 ` Simon Horman
2025-07-25 12:44 ` Jimmy Assarsson
2025-07-26 19:48 ` Simon Horman
2025-07-24 9:24 ` [PATCH v2 02/11] can: kvaser_usb: Add support for ethtool set_phys_id() Jimmy Assarsson
2025-07-24 9:24 ` [PATCH v2 03/11] can: kvaser_usb: Assign netdev.dev_port based on device channel index Jimmy Assarsson
2025-07-24 9:24 ` [PATCH v2 04/11] can: kvaser_usb: Add intermediate variables Jimmy Assarsson
2025-07-24 9:24 ` [PATCH v2 05/11] can: kvaser_usb: Move comment regarding max_tx_urbs Jimmy Assarsson
2025-07-24 9:25 ` [PATCH v2 06/11] can: kvaser_usb: Store the different firmware version components in a struct Jimmy Assarsson
2025-07-24 9:25 ` [PATCH v2 07/11] can: kvaser_usb: Store additional device information Jimmy Assarsson
2025-07-24 9:25 ` [PATCH v2 08/11] can: kvaser_usb: Add devlink support Jimmy Assarsson
2025-07-24 9:25 ` [PATCH v2 09/11] can: kvaser_usb: Expose device information via devlink info_get() Jimmy Assarsson
2025-07-25 3:23 ` Vincent Mailhol
2025-07-24 9:25 ` Jimmy Assarsson [this message]
2025-07-24 9:25 ` [PATCH v2 11/11] Documentation: devlink: add devlink documentation for the kvaser_usb driver Jimmy Assarsson
2025-07-25 3:27 ` Vincent Mailhol
2025-07-25 3:29 ` [PATCH v2 00/11] can: kvaser_usb: Simplify identification of physical CAN interfaces Vincent Mailhol
2025-07-25 12:45 ` Jimmy Assarsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250724092505.8-11-extja@kvaser.com \
--to=extja@kvaser.com \
--cc=jimmyassarsson@gmail.com \
--cc=linux-can@vger.kernel.org \
--cc=mailhol.vincent@wanadoo.fr \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.