[PATCH v2 01/20] clocksource/drivers/vf-pit: Replace raw_readl/writel to reald/writel

[Daniel Lezcano <daniel.lezcano@linaro.org>]

The driver uses the raw_readl() and raw_writel() functions. Those are
not for MMIO devices. Replace them with readl() and writel()

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
---
 drivers/clocksource/timer-vf-pit.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/clocksource/timer-vf-pit.c b/drivers/clocksource/timer-vf-pit.c
index 911c92146eca..8041a8f62d1f 100644
--- a/drivers/clocksource/timer-vf-pit.c
+++ b/drivers/clocksource/timer-vf-pit.c
@@ -35,30 +35,30 @@ static unsigned long cycle_per_jiffy;
 
 static inline void pit_timer_enable(void)
 {
-	__raw_writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL);
+	writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL);
 }
 
 static inline void pit_timer_disable(void)
 {
-	__raw_writel(0, clkevt_base + PITTCTRL);
+	writel(0, clkevt_base + PITTCTRL);
 }
 
 static inline void pit_irq_acknowledge(void)
 {
-	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+	writel(PITTFLG_TIF, clkevt_base + PITTFLG);
 }
 
 static u64 notrace pit_read_sched_clock(void)
 {
-	return ~__raw_readl(clksrc_base + PITCVAL);
+	return ~readl(clksrc_base + PITCVAL);
 }
 
 static int __init pit_clocksource_init(unsigned long rate)
 {
 	/* set the max load value and start the clock source counter */
-	__raw_writel(0, clksrc_base + PITTCTRL);
-	__raw_writel(~0UL, clksrc_base + PITLDVAL);
-	__raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
+	writel(0, clksrc_base + PITTCTRL);
+	writel(~0UL, clksrc_base + PITLDVAL);
+	writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
 
 	sched_clock_register(pit_read_sched_clock, 32, rate);
 	return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate,
@@ -76,7 +76,7 @@ static int pit_set_next_event(unsigned long delta,
 	 * hardware requirement.
 	 */
 	pit_timer_disable();
-	__raw_writel(delta - 1, clkevt_base + PITLDVAL);
+	writel(delta - 1, clkevt_base + PITLDVAL);
 	pit_timer_enable();
 
 	return 0;
@@ -125,8 +125,8 @@ static struct clock_event_device clockevent_pit = {
 
 static int __init pit_clockevent_init(unsigned long rate, int irq)
 {
-	__raw_writel(0, clkevt_base + PITTCTRL);
-	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+	writel(0, clkevt_base + PITTCTRL);
+	writel(PITTFLG_TIF, clkevt_base + PITTFLG);
 
 	BUG_ON(request_irq(irq, pit_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
 			   "VF pit timer", &clockevent_pit));
@@ -183,7 +183,7 @@ static int __init pit_timer_init(struct device_node *np)
 	cycle_per_jiffy = clk_rate / (HZ);
 
 	/* enable the pit module */
-	__raw_writel(~PITMCR_MDIS, timer_base + PITMCR);
+	writel(~PITMCR_MDIS, timer_base + PITMCR);
 
 	ret = pit_clocksource_init(clk_rate);
 	if (ret)
-- 
2.43.0