[PATCH 1/8] mfd: dt-bindings: ti,twl4030-audio: convert to DT schema

[Jihed Chaibi <jihed.chaibi.dev@gmail.com>]

Convert the legacy TXT binding for the TWL4030 audio module
to the modern YAML DT schema format. This adds formal validation
and improves documentation.

Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
---
 .../bindings/mfd/ti,twl4030-audio.yaml        | 91 +++++++++++++++++++
 .../devicetree/bindings/mfd/twl4030-audio.txt | 46 ----------
 2 files changed, 91 insertions(+), 46 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,twl4030-audio.yaml
 delete mode 100644 Documentation/devicetree/bindings/mfd/twl4030-audio.txt

diff --git a/Documentation/devicetree/bindings/mfd/ti,twl4030-audio.yaml b/Documentation/devicetree/bindings/mfd/ti,twl4030-audio.yaml
new file mode 100644
index 000000000..16ddcf007
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,twl4030-audio.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,twl4030-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TWL4030-family Audio Module
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+  The audio module within the TWL4030-family of companion chips consists
+  of an audio codec and a vibra driver. This binding describes the parent
+  node for these functions.
+
+properties:
+  compatible:
+    const: ti,twl4030-audio
+
+  codec:
+    type: object
+    description: Node containing properties for the audio codec functionality.
+    properties:
+      ti,digimic_delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Delay in milliseconds after enabling digital microphones to reduce
+          artifacts.
+
+      ti,ramp_delay_value:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Headset ramp delay configuration to reduce pop noise.
+
+      ti,hs_extmute:
+        type: boolean
+        description:
+          Enable the use of an external mute for headset pop reduction.
+
+      ti,hs_extmute_gpio:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        description:
+          The GPIO specifier for the external mute control.
+        maxItems: 1
+
+      ti,offset_cncl_path:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Offset cancellation path selection. Refer to the Technical
+          Reference Manual for valid values.
+
+    # The 'codec' node itself is optional, but if it exists, it can be empty.
+    # We don't require any of its sub-properties.
+
+  ti,enable-vibra:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Set to 1 to enable the vibra functionality, if missing
+      or it is 0, the vibra functionality is disabled.
+
+additionalProperties: false
+
+required:
+  - compatible
+
+examples:
+  - |
+    i2c {
+
+      clock-frequency = <2600000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      twl: twl@48 {
+        reg = <0x48>;
+        interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+        interrupt-parent = <&intc>;
+
+        twl_audio: audio {
+          compatible = "ti,twl4030-audio";
+
+          ti,enable-vibra = <1>;
+
+          codec {
+            ti,ramp_delay_value = <3>;
+          };
+
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
deleted file mode 100644
index 414d2ae0a..000000000
--- a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Texas Instruments TWL family (twl4030) audio module
-
-The audio module inside the TWL family consist of an audio codec and a vibra
-driver.
-
-Required properties:
-- compatible : must be "ti,twl4030-audio"
-
-Optional properties, nodes:
-
-Audio functionality:
-- codec { }: Need to be present if the audio functionality is used. Within this
-	     section the following options can be used:
-- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts
-		    from the start of the recorded sample (in ms)
--ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise
--ti,hs_extmute: Use external mute for HS pop reduction
--ti,hs_extmute_gpio: Use external GPIO to control the external mute
--ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the
-		      valid values.
-
-Vibra functionality
-- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if
-		   missing or it is 0, the vibra functionality is disabled.
-
-Example:
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-
-			ti,enable-vibra = <1>;
-
-			codec {
-				ti,ramp_delay_value = <3>;
-			};
-
-		};
-	};
-};
-- 
2.39.5