[PATCH] dt-bindings: mailbox: Convert brcm,iproc-flexrm-mbox to DT schema

["Rob Herring (Arm)" <robh@kernel.org>]

Convert the Broadcom FlexRM Ring Manager binding to DT schema format.
It's a straightforward conversion.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../mailbox/brcm,iproc-flexrm-mbox.txt        | 59 -----------------
 .../mailbox/brcm,iproc-flexrm-mbox.yaml       | 63 +++++++++++++++++++
 2 files changed, 63 insertions(+), 59 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
 create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml

diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
deleted file mode 100644
index bf0c998b8603..000000000000
--- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Broadcom FlexRM Ring Manager
-============================
-The Broadcom FlexRM ring manager provides a set of rings which can be
-used to submit work to offload engines. An SoC may have multiple FlexRM
-hardware blocks. There is one device tree entry per FlexRM block. The
-FlexRM driver will create a mailbox-controller instance for given FlexRM
-hardware block where each mailbox channel is a separate FlexRM ring.
-
-Required properties:
---------------------
-- compatible:	Should be "brcm,iproc-flexrm-mbox"
-- reg:		Specifies base physical address and size of the FlexRM
-		ring registers
-- msi-parent:	Phandles (and potential Device IDs) to MSI controllers
-		The FlexRM engine will send MSIs (instead of wired
-		interrupts) to CPU. There is one MSI for each FlexRM ring.
-		Refer devicetree/bindings/interrupt-controller/msi.txt
-- #mbox-cells:	Specifies the number of cells needed to encode a mailbox
-		channel. This should be 3.
-
-		The 1st cell is the mailbox channel number.
-
-		The 2nd cell contains MSI completion threshold. This is the
-		number of completion messages for which FlexRM will inject
-		one MSI interrupt to CPU.
-
-		The 3rd cell contains MSI timer value representing time for
-		which FlexRM will wait to accumulate N completion messages
-		where N is the value specified by 2nd cell above. If FlexRM
-		does not get required number of completion messages in time
-		specified by this cell then it will inject one MSI interrupt
-		to CPU provided at least one completion message is available.
-
-Optional properties:
---------------------
-- dma-coherent:	Present if DMA operations made by the FlexRM engine (such
-		as DMA descriptor access, access to buffers pointed by DMA
-		descriptors and read/write pointer updates to DDR) are
-		cache coherent with the CPU.
-
-Example:
---------
-crypto_mbox: mbox@67000000 {
-	compatible = "brcm,iproc-flexrm-mbox";
-	reg = <0x67000000 0x200000>;
-	msi-parent = <&gic_its 0x7f00>;
-	#mbox-cells = <3>;
-};
-
-crypto@672c0000 {
-	compatible = "brcm,spu2-v2-crypto";
-	reg = <0x672c0000 0x1000>;
-	mboxes = <&crypto_mbox 0 0x1 0xffff>,
-		 <&crypto_mbox 1 0x1 0xffff>,
-		 <&crypto_mbox 16 0x1 0xffff>,
-		 <&crypto_mbox 17 0x1 0xffff>,
-		 <&crypto_mbox 30 0x1 0xffff>,
-		 <&crypto_mbox 31 0x1 0xffff>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml
new file mode 100644
index 000000000000..c801bd2e95f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/brcm,iproc-flexrm-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom FlexRM Ring Manager
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+description:
+  The Broadcom FlexRM ring manager provides a set of rings which can be used to
+  submit work to offload engines. An SoC may have multiple FlexRM hardware
+  blocks. There is one device tree entry per FlexRM block. The FlexRM driver
+  will create a mailbox-controller instance for given FlexRM hardware block
+  where each mailbox channel is a separate FlexRM ring.
+
+properties:
+  compatible:
+    const: brcm,iproc-flexrm-mbox
+
+  reg:
+    maxItems: 1
+
+  msi-parent:
+    maxItems: 1
+
+  '#mbox-cells':
+    description: >
+      The 1st cell is the mailbox channel number.
+
+      The 2nd cell contains MSI completion threshold. This is the number of
+      completion messages for which FlexRM will inject one MSI interrupt to CPU.
+
+      The 3rd cell contains MSI timer value representing time for which FlexRM
+      will wait to accumulate N completion messages where N is the value
+      specified by 2nd cell above. If FlexRM does not get required number of
+      completion messages in time specified by this cell then it will inject one
+      MSI interrupt to CPU provided at least one completion message is
+      available.
+    const: 3
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - msi-parent
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@67000000 {
+        compatible = "brcm,iproc-flexrm-mbox";
+        reg = <0x67000000 0x200000>;
+        msi-parent = <&gic_its 0x7f00>;
+        #mbox-cells = <3>;
+        dma-coherent;
+    };
-- 
2.47.2