From: "Rob Herring (Arm)" <robh@kernel.org>
To: Jeff Johnson <jjohnson@kernel.org>
Cc: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org,
linux-kernel@vger.kernel.org, ath11k@lists.infradead.org
Subject: [PATCH v3] wifi: ath: Use of_reserved_mem_region_to_resource() for "memory-region"
Date: Wed, 13 Aug 2025 16:49:32 -0500 [thread overview]
Message-ID: <20250813214933.897486-1-robh@kernel.org> (raw)
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
The error handling is a bit different for ath10k. "memory-region" is
optional, so failed lookup is not an error. But then an error in
of_address_to_resource() is treated as an error. However, that
distinction is not really important. Either the region is available
and usable or it is not. So now, it is just
of_reserved_mem_region_to_resource() which is checked for an error.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
v3:
- Rebase on v6.17-rc1
v2:
- Split to separate patch
---
drivers/net/wireless/ath/ath10k/snoc.c | 14 +++-----------
drivers/net/wireless/ath/ath11k/ahb.c | 17 +++--------------
drivers/net/wireless/ath/ath11k/qmi.c | 17 ++++-------------
3 files changed, 10 insertions(+), 38 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index f0713bd36173..b3f6424c17d3 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -13,7 +13,7 @@
#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/remoteproc/qcom_rproc.h>
-#include <linux/of_address.h>
+#include <linux/of_reserved_mem.h>
#include <linux/iommu.h>
#include "ce.h"
@@ -1559,19 +1559,11 @@ static void ath10k_modem_deinit(struct ath10k *ar)
static int ath10k_setup_msa_resources(struct ath10k *ar, u32 msa_size)
{
struct device *dev = ar->dev;
- struct device_node *node;
struct resource r;
int ret;
- node = of_parse_phandle(dev->of_node, "memory-region", 0);
- if (node) {
- ret = of_address_to_resource(node, 0, &r);
- of_node_put(node);
- if (ret) {
- dev_err(dev, "failed to resolve msa fixed region\n");
- return ret;
- }
-
+ ret = of_reserved_mem_region_to_resource(dev->of_node, 0, &r);
+ if (!ret) {
ar->msa.paddr = r.start;
ar->msa.mem_size = resource_size(&r);
ar->msa.vaddr = devm_memremap(dev, ar->msa.paddr,
diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
index 50809cc1dad4..8dfe9b40c126 100644
--- a/drivers/net/wireless/ath/ath11k/ahb.c
+++ b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -9,8 +9,8 @@
#include <linux/property.h>
#include <linux/of_device.h>
#include <linux/of.h>
+#include <linux/of_reserved_mem.h>
#include <linux/dma-mapping.h>
-#include <linux/of_address.h>
#include <linux/iommu.h>
#include "ahb.h"
#include "debug.h"
@@ -919,16 +919,10 @@ static int ath11k_ahb_setup_msa_resources(struct ath11k_base *ab)
{
struct ath11k_ahb *ab_ahb = ath11k_ahb_priv(ab);
struct device *dev = ab->dev;
- struct device_node *node;
struct resource r;
int ret;
- node = of_parse_phandle(dev->of_node, "memory-region", 0);
- if (!node)
- return -ENOENT;
-
- ret = of_address_to_resource(node, 0, &r);
- of_node_put(node);
+ ret = of_reserved_mem_region_to_resource(dev->of_node, 0, &r);
if (ret) {
dev_err(dev, "failed to resolve msa fixed region\n");
return ret;
@@ -937,12 +931,7 @@ static int ath11k_ahb_setup_msa_resources(struct ath11k_base *ab)
ab_ahb->fw.msa_paddr = r.start;
ab_ahb->fw.msa_size = resource_size(&r);
- node = of_parse_phandle(dev->of_node, "memory-region", 1);
- if (!node)
- return -ENOENT;
-
- ret = of_address_to_resource(node, 0, &r);
- of_node_put(node);
+ ret = of_reserved_mem_region_to_resource(dev->of_node, 1, &r);
if (ret) {
dev_err(dev, "failed to resolve ce fixed region\n");
return ret;
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index 378ac96b861b..2b547b26ed20 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -13,7 +13,7 @@
#include "debug.h"
#include "hif.h"
#include <linux/of.h>
-#include <linux/of_address.h>
+#include <linux/of_reserved_mem.h>
#include <linux/ioport.h>
#include <linux/firmware.h>
#include <linux/of_irq.h>
@@ -2040,23 +2040,14 @@ static int ath11k_qmi_alloc_target_mem_chunk(struct ath11k_base *ab)
static int ath11k_qmi_assign_target_mem_chunk(struct ath11k_base *ab)
{
struct device *dev = ab->dev;
- struct device_node *hremote_node = NULL;
- struct resource res;
+ struct resource res = {};
u32 host_ddr_sz;
int i, idx, ret;
for (i = 0, idx = 0; i < ab->qmi.mem_seg_count; i++) {
switch (ab->qmi.target_mem[i].type) {
case HOST_DDR_REGION_TYPE:
- hremote_node = of_parse_phandle(dev->of_node, "memory-region", 0);
- if (!hremote_node) {
- ath11k_dbg(ab, ATH11K_DBG_QMI,
- "fail to get hremote_node\n");
- return -ENODEV;
- }
-
- ret = of_address_to_resource(hremote_node, 0, &res);
- of_node_put(hremote_node);
+ ret = of_reserved_mem_region_to_resource(dev->of_node, 0, &res);
if (ret) {
ath11k_dbg(ab, ATH11K_DBG_QMI,
"fail to get reg from hremote\n");
@@ -2095,7 +2086,7 @@ static int ath11k_qmi_assign_target_mem_chunk(struct ath11k_base *ab)
}
if (ath11k_core_coldboot_cal_support(ab)) {
- if (hremote_node) {
+ if (resource_size(&res)) {
ab->qmi.target_mem[idx].paddr =
res.start + host_ddr_sz;
ab->qmi.target_mem[idx].iaddr =
--
2.47.2
next reply other threads:[~2025-08-13 22:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-13 21:49 Rob Herring (Arm) [this message]
2025-09-18 15:30 ` [PATCH v3] wifi: ath: Use of_reserved_mem_region_to_resource() for "memory-region" Vasanthakumar Thiagarajan
2025-09-18 23:47 ` Jeff Johnson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250813214933.897486-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=ath10k@lists.infradead.org \
--cc=ath11k@lists.infradead.org \
--cc=jjohnson@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.