[PATCH net 2/2] selftests: bonding: add fail_over_mac testing

[Hangbin Liu <liuhangbin@gmail.com>]

Add a test to check each value of bond fail_over_mac option.

Also fix a minor garp_test print issue.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
 .../drivers/net/bonding/bond_options.sh       | 139 +++++++++++++++++-
 .../drivers/net/bonding/bond_topo_2d1c.sh     |   3 +
 .../drivers/net/bonding/bond_topo_3d1c.sh     |   2 +
 3 files changed, 142 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh
index 7bc148889ca7..e3f3cc803b56 100755
--- a/tools/testing/selftests/drivers/net/bonding/bond_options.sh
+++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh
@@ -7,6 +7,7 @@ ALL_TESTS="
 	prio
 	arp_validate
 	num_grat_arp
+	fail_over_mac
 "
 
 lib_dir=$(dirname "$0")
@@ -352,8 +353,8 @@ garp_test()
 
 	exp_num=$(echo "${param}" | cut -f6 -d ' ')
 	active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
-	slowwait_for_counter $((exp_num + 5)) $exp_num \
-		tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}"
+	slowwait_for_counter $((exp_num + 5)) $exp_num tc_rule_handle_stats_get \
+		"dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}" &> /dev/null
 
 	# check result
 	real_num=$(tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}")
@@ -376,6 +377,140 @@ num_grat_arp()
 	done
 }
 
+check_all_mac_same()
+{
+	RET=0
+	# all slaves should have same mac address (with the first port's mac)
+	local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]')
+	local eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]')
+	local eth1_mac=$(ip -n "$s_ns" -j link show eth1 | jq -r '.[]["address"]')
+	local eth2_mac=$(ip -n "$s_ns" -j link show eth2 | jq -r '.[]["address"]')
+	if [ "$bond_mac" != "${mac[0]}" ] || [ "$eth0_mac" != "$bond_mac" ] || \
+		[ "$eth1_mac" != "$bond_mac" ] || [ "$eth2_mac" != "$bond_mac" ]; then
+		RET=1
+	fi
+}
+
+check_bond_mac_same_with_first()
+{
+	RET=0
+	# bond mac address should be same with the first added slave
+	local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]')
+	if [ "$bond_mac" != "${mac[0]}" ]; then
+		RET=1
+	fi
+}
+
+check_bond_mac_same_with_active()
+{
+	RET=0
+	# bond mac address should be same with active slave
+	local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]')
+	local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
+	local active_slave_mac=$(ip -n "$s_ns" -j link show "$active_slave" | jq -r '.[]["address"]')
+	if [ "$bond_mac" != "$active_slave_mac" ]; then
+		RET=1
+	fi
+}
+
+check_backup_slave_mac_not_change()
+{
+	RET=0
+	# backup slave's mac address is not changed
+	if ip -n "$s_ns" -d -j link show type bond_slave | jq -e '.[]
+		| select(.linkinfo.info_slave_data.state=="BACKUP")
+		| select(.address != .linkinfo.info_slave_data.perm_hwaddr)' &> /dev/null; then
+		RET=1
+	fi
+}
+
+check_backup_slave_mac_inherit()
+{
+	local backup_mac
+	RET=0
+
+	# backup slaves should use mac[1] or mac[2]
+	local backup_macs=$(ip -n "$s_ns" -d -j link show type bond_slave | \
+		jq -r '.[] | select(.linkinfo.info_slave_data.state=="BACKUP") | .address')
+	for backup_mac in $backup_macs; do
+		if [ "$backup_mac" != "${mac[1]}" ] && [ "$backup_mac" != "${mac[2]}" ]; then
+			RET=1
+		fi
+	done
+}
+
+check_first_slave_random_mac()
+{
+	RET=0
+	# remove the first added slave and added it back
+	ip -n "$s_ns" link set eth0 nomaster
+	ip -n "$s_ns" link set eth0 master bond0
+
+	# the first slave should use random mac address
+	eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]')
+	[ "$eth0_mac" = "${mac[0]}" ] && RET=1
+	log_test "bond fail_over_mac follow" "random first slave mac"
+
+	# remove the first slave, the permanent MAC address should be restored back
+	ip -n "$s_ns" link set eth0 nomaster
+	eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]')
+	[ "$eth0_mac" != "${mac[0]}" ] && RET=1
+}
+
+do_active_backup_failover()
+{
+	local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
+	ip -n ${s_ns} link set ${active_slave} down
+	slowwait 2 active_slave_changed $active_slave
+	ip -n ${s_ns} link set ${active_slave} up
+}
+
+fail_over_mac()
+{
+	# Bring down the first interface on the switch to force the bond to
+	# select another active interface instead of the first one that joined.
+	ip -n "$g_ns" link set s0 down
+
+	# fail_over_mac none
+	bond_reset "mode active-backup miimon 100 fail_over_mac 0"
+	check_all_mac_same
+	log_test "fail_over_mac 0" "all slaves have same mac"
+	do_active_backup_failover
+	check_all_mac_same
+	log_test "fail_over_mac 0" "failover: all slaves have same mac"
+
+	# fail_over_mac active
+	bond_reset "mode active-backup miimon 100 fail_over_mac 1"
+	check_bond_mac_same_with_active
+	log_test "fail_over_mac 1" "bond mac is same with active slave mac"
+	check_backup_slave_mac_not_change
+	log_test "fail_over_mac 1" "backup slave mac is not changed"
+	do_active_backup_failover
+	check_bond_mac_same_with_active
+	log_test "fail_over_mac 1" "failover: bond mac is same with active slave mac"
+	check_backup_slave_mac_not_change
+	log_test "fail_over_mac 1" "failover: backup slave mac is not changed"
+
+	# fail_over_mac follow
+	bond_reset "mode active-backup miimon 100 fail_over_mac 2"
+	check_bond_mac_same_with_first
+	log_test "fail_over_mac 2" "bond mac is same with first slave mac"
+	check_bond_mac_same_with_active
+	log_test "fail_over_mac 2" "bond mac is same with active slave mac"
+	check_backup_slave_mac_inherit
+	log_test "fail_over_mac 2" "backup slave mac inherit"
+	do_active_backup_failover
+	check_bond_mac_same_with_first
+	log_test "fail_over_mac 2" "failover: bond mac is same with first slave mac"
+	check_bond_mac_same_with_active
+	log_test "fail_over_mac 2" "failover: bond mac is same with active slave mac"
+	check_backup_slave_mac_inherit
+	log_test "fail_over_mac 2" "failover: backup slave mac inherit"
+	check_first_slave_random_mac
+	log_test "fail_over_mac 2" "first slave mac random"
+
+}
+
 trap cleanup EXIT
 
 setup_prepare
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh
index 195ef83cfbf1..167aa4a4a12a 100644
--- a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh
+++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh
@@ -39,6 +39,8 @@ g_ip4="192.0.2.254"
 s_ip6="2001:db8::1"
 c_ip6="2001:db8::10"
 g_ip6="2001:db8::254"
+mac[0]="00:0a:0b:0c:0d:01"
+mac[1]="00:0a:0b:0c:0d:02"
 
 gateway_create()
 {
@@ -62,6 +64,7 @@ server_create()
 
 	for i in $(seq 0 1); do
 		ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns}
+		ip -n "${s_ns}" link set "eth${i}" addr "${mac[$i]}"
 
 		ip -n ${g_ns} link set s${i} up
 		ip -n ${g_ns} link set s${i} master br0
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh
index 3a1333d9a85b..23a2932301cc 100644
--- a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh
+++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh
@@ -26,6 +26,7 @@
 #  +-------------------------------------+
 
 source bond_topo_2d1c.sh
+mac[2]="00:0a:0b:0c:0d:03"
 
 setup_prepare()
 {
@@ -36,6 +37,7 @@ setup_prepare()
 	# Add the extra device as we use 3 down links for bond0
 	local i=2
 	ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns}
+	ip -n "${s_ns}" link set "eth${i}" addr "${mac[$i]}"
 	ip -n ${g_ns} link set s${i} up
 	ip -n ${g_ns} link set s${i} master br0
 	ip -n ${s_ns} link set eth${i} master bond0
-- 
2.50.1