From: <gregkh@linuxfoundation.org>
To: u.kleine-koenig@baylibre.com,angelogioacchino.delregno@collabora.com,ukleinek@kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] pwm: mediatek: Fix duty and period setting" failed to apply to 5.4-stable tree
Date: Thu, 21 Aug 2025 15:16:43 +0200 [thread overview]
Message-ID: <2025082143-creature-relay-7247@gregkh> (raw)
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x f21d136caf8171f94159d975ea4620c164431bd9
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025082143-creature-relay-7247@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f21d136caf8171f94159d975ea4620c164431bd9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@baylibre.com>
Date: Mon, 28 Jul 2025 18:00:18 +0200
Subject: [PATCH] pwm: mediatek: Fix duty and period setting
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The period generated by the hardware is
(PWMDWIDTH + 1) << CLKDIV) / freq
according to my tests with a signal analyser and also the documentation.
The current algorithm doesn't consider the `+ 1` part and so configures
slightly too high periods. The same issue exists for the duty cycle
setting. So subtract 1 from both the register values for period and
duty cycle. If period is 0, bail out, if duty_cycle is 0, just disable
the PWM which results in a constant low output.
Fixes: caf065f8fd58 ("pwm: Add MediaTek PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/6d1fa87a76f8020bfe3171529b8e19baffceab10.1753717973.git.u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index b6560e52c803..e4b595fc5a5e 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -170,7 +170,10 @@ static int pwm_mediatek_config(struct pwm_chip *chip, struct pwm_device *pwm,
do_div(resolution, clk_rate);
cnt_period = DIV_ROUND_CLOSEST_ULL((u64)period_ns * 1000, resolution);
- while (cnt_period > 8191) {
+ if (!cnt_period)
+ return -EINVAL;
+
+ while (cnt_period > 8192) {
resolution *= 2;
clkdiv++;
cnt_period = DIV_ROUND_CLOSEST_ULL((u64)period_ns * 1000,
@@ -193,9 +196,16 @@ static int pwm_mediatek_config(struct pwm_chip *chip, struct pwm_device *pwm,
}
cnt_duty = DIV_ROUND_CLOSEST_ULL((u64)duty_ns * 1000, resolution);
+
pwm_mediatek_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | clkdiv);
- pwm_mediatek_writel(pc, pwm->hwpwm, reg_width, cnt_period);
- pwm_mediatek_writel(pc, pwm->hwpwm, reg_thres, cnt_duty);
+ pwm_mediatek_writel(pc, pwm->hwpwm, reg_width, cnt_period - 1);
+
+ if (cnt_duty) {
+ pwm_mediatek_writel(pc, pwm->hwpwm, reg_thres, cnt_duty - 1);
+ pwm_mediatek_enable(chip, pwm);
+ } else {
+ pwm_mediatek_disable(chip, pwm);
+ }
out:
pwm_mediatek_clk_disable(chip, pwm);
@@ -224,11 +234,8 @@ static int pwm_mediatek_apply(struct pwm_chip *chip, struct pwm_device *pwm,
if (err)
return err;
- if (!pwm->state.enabled) {
+ if (!pwm->state.enabled)
err = pwm_mediatek_clk_enable(chip, pwm);
- if (!err)
- pwm_mediatek_enable(chip, pwm);
- }
return err;
}
next reply other threads:[~2025-08-21 13:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-21 13:16 gregkh [this message]
2025-08-22 19:05 ` [PATCH 5.4.y 1/3] pwm: mediatek: Implement .apply() callback Sasha Levin
2025-08-22 19:05 ` [PATCH 5.4.y 2/3] pwm: mediatek: Handle hardware enable and clock enable separately Sasha Levin
2025-08-22 19:05 ` [PATCH 5.4.y 3/3] pwm: mediatek: Fix duty and period setting Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025082143-creature-relay-7247@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=stable@vger.kernel.org \
--cc=u.kleine-koenig@baylibre.com \
--cc=ukleinek@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.