From: kernel test robot <lkp@intel.com>
To: cros-kernel-buildreports@googlegroups.com
Cc: oe-kbuild-all@lists.linux.dev
Subject: [chrome-os:chromeos-6.6 443/443] arch/arm64/boot/dts/mediatek/mt8189-evb.dts:902.23-931.4: Warning (unit_address_vs_reg): /soc/pinctrl@10005000/mmc0@0: node has a unit name, but no reg or ranges property
Date: Sat, 23 Aug 2025 17:06:38 +0800 [thread overview]
Message-ID: <202508231638.QoJQ53uj-lkp@intel.com> (raw)
tree: https://chromium.googlesource.com/chromiumos/third_party/kernel chromeos-6.6
head: 12cacc6855c36b7b2ce4a8f020b4a40a6433357b
commit: e301c33f8c751a47c4c3488ee8df07bcca477290 [443/443] CHROMIUM: arm64: dts: mt8189-evb: Initial DTS for mt8189-evb
config: arm64-randconfig-001-20250823 (https://download.01.org/0day-ci/archive/20250823/202508231638.QoJQ53uj-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.5.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250823/202508231638.QoJQ53uj-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202508231638.QoJQ53uj-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
>> arch/arm64/boot/dts/mediatek/mt8189-evb.dts:902.23-931.4: Warning (unit_address_vs_reg): /soc/pinctrl@10005000/mmc0@0: node has a unit name, but no reg or ranges property
>> arch/arm64/boot/dts/mediatek/mt8189-evb.dts:955.23-971.4: Warning (unit_address_vs_reg): /soc/pinctrl@10005000/mmc1@0: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:1186.27-1198.5: Warning (unit_address_vs_reg): /soc/xs-phy@11b10000: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:1390.27-1402.5: Warning (unit_address_vs_reg): /soc/xs-phy@11e90000: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:1404.27-1416.5: Warning (unit_address_vs_reg): /soc/xs-phy@11ef0000: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:1511.18-1517.6: Warning (unit_address_vs_reg): /soc/gpu@13000000/power-model@0: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:1518.18-1521.6: Warning (unit_address_vs_reg): /soc/gpu@13000000/power-model@1: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt6359.dtsi:305.19-308.6: Warning (unit_address_vs_reg): /soc/pwrap@1cc04000/pmic/rtc/fginit: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/mediatek/mt6359.dtsi:310.17-313.6: Warning (unit_address_vs_reg): /soc/pwrap@1cc04000/pmic/rtc/fgsoc: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/mediatek/mt6359.dtsi:315.19-318.6: Warning (unit_address_vs_reg): /soc/pwrap@1cc04000/pmic/rtc/ext32k: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/mediatek/mt8189.dtsi:2556.30-2560.8: Warning (unit_address_vs_reg): /soc/thermal-zones/soc_max/trips/trip-point@0: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:2562.23-2566.8: Warning (unit_address_vs_reg): /soc/thermal-zones/soc_max/trips/target@1: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:2568.35-2572.8: Warning (unit_address_vs_reg): /soc/thermal-zones/soc_max/trips/soc-max-crit@0: node has a unit name, but no reg or ranges property
>> arch/arm64/boot/dts/mediatek/mt8189-evb.dts:21.27-28.4: Warning (unit_address_vs_reg): /regulator@0: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189-evb.dts:30.27-37.4: Warning (unit_address_vs_reg): /regulator@1: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189-evb.dts:39.27-46.4: Warning (unit_address_vs_reg): /regulator@2: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189-evb.dts:48.27-55.4: Warning (unit_address_vs_reg): /regulator@3: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189-evb.dts:57.27-64.4: Warning (unit_address_vs_reg): /regulator@4: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:430.46-437.5: Warning (simple_bus_reg): /soc/performance-controller@108d68: simple-bus unit address format error, expected "108d78"
arch/arm64/boot/dts/mediatek/mt8189.dtsi:685.16-688.5: Warning (simple_bus_reg): /soc/sound: missing or empty reg/ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:1186.27-1198.5: Warning (simple_bus_reg): /soc/xs-phy@11b10000: missing or empty reg/ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:1368.27-1388.5: Warning (simple_bus_reg): /soc/xs-phy@11e80000: simple-bus unit address format error, expected "11e83000"
arch/arm64/boot/dts/mediatek/mt8189.dtsi:1390.27-1402.5: Warning (simple_bus_reg): /soc/xs-phy@11e90000: missing or empty reg/ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:1404.27-1416.5: Warning (simple_bus_reg): /soc/xs-phy@11ef0000: missing or empty reg/ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:1524.32-1622.5: Warning (simple_bus_reg): /soc/opp-table-gpu: missing or empty reg/ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:2548.32-2856.5: Warning (simple_bus_reg): /soc/thermal-zones: missing or empty reg/ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:2858.10-2861.5: Warning (simple_bus_reg): /soc/emiisu: missing or empty reg/ranges property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:439.37-459.5: Warning (avoid_unnecessary_addr_size): /soc/interrupt-controller@c000000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
arch/arm64/boot/dts/mediatek/mt8189.dtsi:461.29-465.5: Warning (unique_unit_address_if_enabled): /soc/syscon@d01a000: duplicate unit-address (also used in node /soc/soc-dbg-error-flag@d01a000)
>> arch/arm64/boot/dts/mediatek/mt8189.dtsi:629.32-683.5: Warning (unique_unit_address_if_enabled): /soc/mt8189-afe-pcm@11050000: duplicate unit-address (also used in node /soc/syscon@11050000)
vim +902 arch/arm64/boot/dts/mediatek/mt8189-evb.dts
465
466 &pio {
467 edp_tx_hpd_pins: edp-tx-hpd-pins{
468 pins-hpd {
469 pinmux = <PINMUX_GPIO28__FUNC_EDP_TX_HPD>;
470 bias-pull-up;
471 };
472 };
473
474 panel_fixed_pins: panel-fixed-pins {
475 pins1 {
476 pinmux = <PINMUX_GPIO29__FUNC_GPIO29>,
477 <PINMUX_GPIO108__FUNC_GPIO108>,
478 <PINMUX_GPIO109__FUNC_GPIO109>,
479 <PINMUX_GPIO110__FUNC_GPIO110>;
480 bias-pull-up;
481 };
482 };
483
484 i2c0_pins: i2c0-default {
485 pins-bus {
486 pinmux = <PINMUX_GPIO52__FUNC_SDA0>,
487 <PINMUX_GPIO51__FUNC_SCL0>;
488 bias-disable;
489 };
490 };
491
492 i2c1_pins: i2c1-default {
493 pins-bus {
494 pinmux = <PINMUX_GPIO54__FUNC_SDA1>,
495 <PINMUX_GPIO53__FUNC_SCL1>;
496 bias-disable;
497 };
498 };
499
500 i2c2_pins: i2c2-default {
501 pins-bus {
502 pinmux = <PINMUX_GPIO56__FUNC_SDA2>,
503 <PINMUX_GPIO55__FUNC_SCL2>;
504 bias-disable;
505 };
506 };
507
508 i2c3_pins: i2c3-default {
509 pins-bus {
510 pinmux = <PINMUX_GPIO58__FUNC_SDA3>,
511 <PINMUX_GPIO57__FUNC_SCL3>;
512 bias-disable;
513 };
514 };
515
516 i2c4_pins: i2c4-default {
517 pins-bus {
518 pinmux = <PINMUX_GPIO60__FUNC_SDA4>,
519 <PINMUX_GPIO59__FUNC_SCL4>;
520 bias-disable;
521 };
522 };
523 i2c5_pins: i2c5-default {
524 pins-bus {
525 pinmux = <PINMUX_GPIO62__FUNC_SDA5>,
526 <PINMUX_GPIO61__FUNC_SCL5>;
527 bias-disable;
528 };
529 };
530
531 i2c6_pins: i2c6-default {
532 pins-bus {
533 pinmux = <PINMUX_GPIO64__FUNC_SDA6>,
534 <PINMUX_GPIO63__FUNC_SCL6>;
535 bias-disable;
536 };
537 };
538
539 i2c7_pins: i2c7-default {
540 pins-bus {
541 pinmux = <PINMUX_GPIO66__FUNC_SDA7>,
542 <PINMUX_GPIO65__FUNC_SCL7>;
543 bias-disable;
544 };
545 };
546
547 i2c8_pins: i2c8-default {
548 pins-bus {
549 pinmux = <PINMUX_GPIO68__FUNC_SDA8>,
550 <PINMUX_GPIO67__FUNC_SCL8>;
551 bias-disable;
552 };
553 };
554
555 spi0_pins: spi0-default {
556 pins-cmd-dat {
557 pinmux = <PINMUX_GPIO69__FUNC_SPIM0_CSB>,
558 <PINMUX_GPIO70__FUNC_SPIM0_CLK>,
559 <PINMUX_GPIO71__FUNC_SPIM0_MO>,
560 <PINMUX_GPIO72__FUNC_SPIM0_MI>;
561 };
562 };
563
564 spi1_pins: spi1-default {
565 pins-cmd-dat {
566 pinmux = <PINMUX_GPIO73__FUNC_SPIM1_CSB>,
567 <PINMUX_GPIO74__FUNC_SPIM1_CLK>,
568 <PINMUX_GPIO75__FUNC_SPIM1_MO>,
569 <PINMUX_GPIO76__FUNC_SPIM1_MI>;
570 };
571 };
572
573 spi2_pins: spi2-default {
574 pins-cmd-dat {
575 pinmux = <PINMUX_GPIO77__FUNC_SPIM2_CSB>,
576 <PINMUX_GPIO78__FUNC_SPIM2_CLK>,
577 <PINMUX_GPIO79__FUNC_SPIM2_MO>,
578 <PINMUX_GPIO80__FUNC_SPIM2_MI>;
579 };
580 };
581
582 spi3_pins: spi3-default {
583 pins-cmd-dat {
584 pinmux = <PINMUX_GPIO0__FUNC_SPIM3_A_CSB>,
585 <PINMUX_GPIO1__FUNC_SPIM3_A_CLK>,
586 <PINMUX_GPIO2__FUNC_SPIM3_A_MO>,
587 <PINMUX_GPIO3__FUNC_SPIM3_A_MI>;
588 };
589 };
590
591 spi4_pins: spi4-default {
592 pins-cmd-dat {
593 pinmux = <PINMUX_GPIO4__FUNC_SPIM4_A_CSB>,
594 <PINMUX_GPIO5__FUNC_SPIM4_A_CLK>,
595 <PINMUX_GPIO6__FUNC_SPIM4_A_MO>,
596 <PINMUX_GPIO7__FUNC_SPIM4_A_MI>;
597 };
598 };
599
600 spi5_pins: spi5-default {
601 pins-cmd-dat {
602 pinmux = <PINMUX_GPIO8__FUNC_SPIM5_A_CSB>,
603 <PINMUX_GPIO9__FUNC_SPIM5_A_CLK>,
604 <PINMUX_GPIO10__FUNC_SPIM5_A_MO>,
605 <PINMUX_GPIO11__FUNC_SPIM5_A_MI>;
606 };
607 };
608
609 pcie_pins_default: pcie-default {
610 pins-cmd-dat {
611 pinmux = <PINMUX_GPIO48__FUNC_WAKEN>,
612 <PINMUX_GPIO49__FUNC_PERSTN>,
613 <PINMUX_GPIO50__FUNC_CLKREQN>;
614 };
615 };
616
617 nor_pins: nor-pins {
618 pins-ck-io {
619 pinmux = <PINMUX_GPIO150__FUNC_SPINOR_CK>,
620 <PINMUX_GPIO152__FUNC_SPINOR_IO0>,
621 <PINMUX_GPIO153__FUNC_SPINOR_IO1>;
622 drive-strength = <8>;
623 bias-pull-down;
624 };
625
626 pins-cs {
627 pinmux = <PINMUX_GPIO151__FUNC_SPINOR_CS>;
628 drive-strength = <8>;
629 bias-pull-up;
630 };
631 };
632
633 dptx_pin: dptx-default-pins {
634 pins-cmd-dat {
635 pinmux = <PINMUX_GPIO27__FUNC_DP_TX_HPD>;
636 };
637 };
638 audio_spk_en_pins: audio_spk_en_pins {
639 pins-spk-en {
640 pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
641 output-low;
642 };
643 };
644
645 audio_codec_pins: audio-codec-pins {
646 pins-hp-int-odl {
647 pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
648 input-enable;
649 bias-disable;
650 };
651 };
652
653 aud_gpio_i2sin0_off: aud-gpio-i2sin0-off {
654 pins-cmd1-dat {
655 pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
656 input-enable;
657 bias-pull-down;
658 };
659 };
660
661 aud_gpio_i2sin0_on: aud-gpio-i2sin0-on {
662 pins-cmd1-dat {
663 pinmux = <PINMUX_GPIO106__FUNC_I2SIN0_DI>;
664 input-schmitt-enable;
665 bias-disable;
666 };
667 };
668
669 aud_gpio_i2sout0_off: aud-gpio-i2sout0-off {
670 pins-cmd1-dat {
671 pinmux = <PINMUX_GPIO107__FUNC_GPIO107>;
672 input-enable;
673 bias-pull-down;
674 };
675
676 pins-cmd2-dat {
677 pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
678 input-enable;
679 bias-pull-down;
680 };
681
682 pins-cmd3-dat {
683 pinmux = <PINMUX_GPIO109__FUNC_GPIO109>;
684 input-enable;
685 bias-pull-down;
686 };
687
688 pins-cmd4-dat {
689 pinmux = <PINMUX_GPIO110__FUNC_GPIO110>;
690 input-enable;
691 bias-pull-down;
692 };
693 };
694
695 aud_gpio_i2sout0_on: aud-gpio-i2sout0-on {
696 pins-cmd1-dat {
697 pinmux = <PINMUX_GPIO107__FUNC_I2SOUT0_MCK>;
698 input-schmitt-enable;
699 bias-disable;
700 };
701
702 pins-cmd2-dat {
703 pinmux = <PINMUX_GPIO108__FUNC_I2SOUT0_BCK>;
704 input-schmitt-enable;
705 bias-disable;
706 };
707
708 pins-cmd3-dat {
709 pinmux = <PINMUX_GPIO109__FUNC_I2SOUT0_LRCK>;
710 input-schmitt-enable;
711 bias-disable;
712 };
713
714 pins-cmd4-dat {
715 pinmux = <PINMUX_GPIO110__FUNC_I2SOUT0_DO>;
716 input-schmitt-enable;
717 bias-disable;
718 };
719 };
720
721 aud_gpio_i2sin1_off: aud-gpio-i2sin1-off {
722 pins-cmd1-dat {
723 pinmux = <PINMUX_GPIO130__FUNC_GPIO130>;
724 input-enable;
725 bias-pull-down;
726 };
727 };
728
729 aud_gpio_i2sin1_on: aud-gpio-i2sin1-on {
730 pins-cmd1-dat {
731 pinmux = <PINMUX_GPIO130__FUNC_I2SIN1_DI>;
732 input-schmitt-enable;
733 bias-disable;
734 };
735 };
736
737 aud_gpio_i2sout1_off: aud-gpio-i2sout1-off {
738 pins-cmd1-dat {
739 pinmux = <PINMUX_GPIO111__FUNC_GPIO111>;
740 input-enable;
741 bias-pull-down;
742 };
743
744 pins-cmd2-dat {
745 pinmux = <PINMUX_GPIO112__FUNC_GPIO112>;
746 input-enable;
747 bias-pull-down;
748 };
749
750 pins-cmd3-dat {
751 pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
752 input-enable;
753 bias-pull-down;
754 };
755
756 pins-cmd4-dat {
757 pinmux = <PINMUX_GPIO114__FUNC_GPIO114>;
758 input-enable;
759 bias-pull-down;
760 };
761 };
762
763 aud_gpio_i2sout1_on: aud-gpio-i2sout1-on {
764 pins-cmd1-dat {
765 pinmux = <PINMUX_GPIO111__FUNC_I2SOUT1_MCK>;
766 input-schmitt-enable;
767 bias-disable;
768 };
769
770 pins-cmd2-dat {
771 pinmux = <PINMUX_GPIO112__FUNC_I2SOUT1_BCK>;
772 input-schmitt-enable;
773 bias-disable;
774 };
775
776 pins-cmd3-dat {
777 pinmux = <PINMUX_GPIO113__FUNC_I2SOUT1_LRCK>;
778 input-schmitt-enable;
779 bias-disable;
780 };
781
782 pins-cmd4-dat {
783 pinmux = <PINMUX_GPIO114__FUNC_I2SOUT1_DO>;
784 input-schmitt-enable;
785 bias-disable;
786 };
787 };
788
789 aud_gpio_ap_dmic_off: aud-gpio-ap-dmic-off {
790 pins-cmd1-dat {
791 pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
792 input-enable;
793 bias-pull-down;
794 };
795 pins-cmd2-dat {
796 pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
797 input-enable;
798 bias-pull-down;
799 };
800 };
801 aud_gpio_ap_dmic_on: aud-gpio-ap-dmic-on {
802 pins-cmd1-dat {
803 pinmux = <PINMUX_GPIO119__FUNC_DMIC0_CLK>;
804 input-schmitt-enable;
805 bias-disable;
806 };
807 pins-cmd2-dat {
808 pinmux = <PINMUX_GPIO120__FUNC_DMIC0_DAT0>;
809 input-schmitt-enable;
810 bias-disable;
811 };
812 };
813 aud_gpio_ap_dmic1_off: aud-gpio-ap-dmic1-off {
814 pins-cmd1-dat {
815 pinmux = <PINMUX_GPIO122__FUNC_GPIO122>;
816 input-enable;
817 bias-pull-down;
818 };
819 pins-cmd2-dat {
820 pinmux = <PINMUX_GPIO123__FUNC_GPIO123>;
821 input-enable;
822 bias-pull-down;
823 };
824 };
825 aud_gpio_ap_dmic1_on: aud-gpio-ap-dmic1-on {
826 pins-cmd1-dat {
827 pinmux = <PINMUX_GPIO122__FUNC_DMIC1_CLK>;
828 input-schmitt-enable;
829 bias-disable;
830 };
831 pins-cmd2-dat {
832 pinmux = <PINMUX_GPIO123__FUNC_DMIC1_DAT0>;
833 input-schmitt-enable;
834 bias-disable;
835 };
836 };
837
838 aud_gpio_pcm_off: aud-gpio-pcm-off {
839 pins-cmd1-dat {
840 pinmux = <PINMUX_GPIO115__FUNC_GPIO115>;
841 input-enable;
842 bias-pull-down;
843 };
844 pins-cmd2-dat {
845 pinmux = <PINMUX_GPIO116__FUNC_GPIO116>;
846 input-enable;
847 bias-pull-down;
848 };
849 pins-cmd3-dat {
850 pinmux = <PINMUX_GPIO118__FUNC_GPIO118>;
851 input-enable;
852 bias-pull-down;
853 };
854 };
855
856 aud_gpio_pcm_on: aud-gpio-pcm-on {
857 pins-cmd1-dat {
858 pinmux = <PINMUX_GPIO115__FUNC_PCM0_CLK>;
859 input-schmitt-enable;
860 bias-disable;
861 };
862 pins-cmd2-dat {
863 pinmux = <PINMUX_GPIO116__FUNC_PCM0_SYNC>;
864 input-schmitt-enable;
865 bias-disable;
866 };
867 pins-cmd3-dat {
868 pinmux = <PINMUX_GPIO118__FUNC_PCM0_DO>;
869 input-schmitt-enable;
870 bias-disable;
871 };
872 };
873 /* AUDIO GPIO standardization end */
874
875 mmc0_pins_default: mmc0default {
876 pins-cmd-dat {
877 pinmux = <PINMUX_GPIO156__FUNC_MSDC0_DAT7>,
878 <PINMUX_GPIO157__FUNC_MSDC0_DAT6>,
879 <PINMUX_GPIO158__FUNC_MSDC0_DAT5>,
880 <PINMUX_GPIO159__FUNC_MSDC0_DAT4>,
881 <PINMUX_GPIO161__FUNC_MSDC0_CMD>,
882 <PINMUX_GPIO163__FUNC_MSDC0_DAT3>,
883 <PINMUX_GPIO164__FUNC_MSDC0_DAT2>,
884 <PINMUX_GPIO165__FUNC_MSDC0_DAT1>,
885 <PINMUX_GPIO166__FUNC_MSDC0_DAT0>;
886 input-enable;
887 drive-strength = <MTK_DRIVE_6mA>;
888 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
889 };
890 pins-clk {
891 pinmux = <PINMUX_GPIO162__FUNC_MSDC0_CLK>;
892 drive-strength = <MTK_DRIVE_6mA>;
893 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
894 };
895 pins-rst {
896 pinmux = <PINMUX_GPIO160__FUNC_MSDC0_RSTB>;
897 drive-strength = <MTK_DRIVE_6mA>;
898 bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
899 };
900 };
901
> 902 mmc0_pins_uhs: mmc0@0{
903 pins-cmd-dat {
904 pinmux = <PINMUX_GPIO156__FUNC_MSDC0_DAT7>,
905 <PINMUX_GPIO157__FUNC_MSDC0_DAT6>,
906 <PINMUX_GPIO158__FUNC_MSDC0_DAT5>,
907 <PINMUX_GPIO159__FUNC_MSDC0_DAT4>,
908 <PINMUX_GPIO161__FUNC_MSDC0_CMD>,
909 <PINMUX_GPIO163__FUNC_MSDC0_DAT3>,
910 <PINMUX_GPIO164__FUNC_MSDC0_DAT2>,
911 <PINMUX_GPIO165__FUNC_MSDC0_DAT1>,
912 <PINMUX_GPIO166__FUNC_MSDC0_DAT0>;
913 input-enable;
914 drive-strength = <MTK_DRIVE_8mA>;
915 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
916 };
917 pins-clk {
918 pinmux = <PINMUX_GPIO162__FUNC_MSDC0_CLK>;
919 drive-strength = <MTK_DRIVE_8mA>;
920 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
921 };
922 pins-ds {
923 pinmux = <PINMUX_GPIO167__FUNC_MSDC0_DSL>;
924 drive-strength = <MTK_DRIVE_8mA>;
925 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
926 };
927 pins-rst {
928 pinmux = <PINMUX_GPIO160__FUNC_MSDC0_RSTB>;
929 bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
930 };
931 };
932
933 mmc1_pins_default: mmc1default {
934 pins-cmd-dat {
935 pinmux = <PINMUX_GPIO168__FUNC_MSDC1_CMD>,
936 <PINMUX_GPIO170__FUNC_MSDC1_DAT0>,
937 <PINMUX_GPIO171__FUNC_MSDC1_DAT1>,
938 <PINMUX_GPIO172__FUNC_MSDC1_DAT2>,
939 <PINMUX_GPIO173__FUNC_MSDC1_DAT3>;
940 input-enable;
941 drive-strength = <MTK_DRIVE_8mA>;
942 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
943 };
944 pins-clk {
945 pinmux = <PINMUX_GPIO169__FUNC_MSDC1_CLK>;
946 drive-strength = <MTK_DRIVE_8mA>;
947 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
948 };
949 pins-insert {
950 pinmux = <PINMUX_GPIO2__FUNC_GPIO2>;
951 bias-pull-up;
952 };
953 };
954
> 955 mmc1_pins_uhs: mmc1@0{
956 pins-cmd-dat {
957 pinmux = <PINMUX_GPIO168__FUNC_MSDC1_CMD>,
958 <PINMUX_GPIO170__FUNC_MSDC1_DAT0>,
959 <PINMUX_GPIO171__FUNC_MSDC1_DAT1>,
960 <PINMUX_GPIO172__FUNC_MSDC1_DAT2>,
961 <PINMUX_GPIO173__FUNC_MSDC1_DAT3>;
962 input-enable;
963 drive-strength = <MTK_DRIVE_8mA>;
964 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
965 };
966 pins-clk {
967 pinmux = <PINMUX_GPIO169__FUNC_MSDC1_CLK>;
968 drive-strength = <MTK_DRIVE_8mA>;
969 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
970 };
971 };
972 };
973
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
reply other threads:[~2025-08-23 9:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202508231638.QoJQ53uj-lkp@intel.com \
--to=lkp@intel.com \
--cc=cros-kernel-buildreports@googlegroups.com \
--cc=oe-kbuild-all@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.