From: "Michael S. Tsirkin" <mst@redhat.com>
To: Simon Schippers <simon.schippers@tu-dortmund.de>
Cc: willemdebruijn.kernel@gmail.com, jasowang@redhat.com,
eperezma@redhat.com, stephen@networkplumber.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
virtualization@lists.linux.dev, kvm@vger.kernel.org,
Tim Gebauer <tim.gebauer@tu-dortmund.de>
Subject: Re: [PATCH 1/4] ptr_ring_spare: Helper to check if spare capacity of size cnt is available
Date: Wed, 3 Sep 2025 09:05:14 -0400 [thread overview]
Message-ID: <20250903085610-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20250902080957.47265-2-simon.schippers@tu-dortmund.de>
On Tue, Sep 02, 2025 at 10:09:54AM +0200, Simon Schippers wrote:
> The implementation is inspired by ptr_ring_empty.
>
> Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
> Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
> Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
> ---
> include/linux/ptr_ring.h | 71 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 71 insertions(+)
>
> diff --git a/include/linux/ptr_ring.h b/include/linux/ptr_ring.h
> index 551329220e4f..6b8cfaecf478 100644
> --- a/include/linux/ptr_ring.h
> +++ b/include/linux/ptr_ring.h
> @@ -243,6 +243,77 @@ static inline bool ptr_ring_empty_bh(struct ptr_ring *r)
> return ret;
> }
>
> +/*
> + * Check if a spare capacity of cnt is available without taking any locks.
Not sure what "spare" means here. I think you mean
Check if the ring has enough space to produce a given
number of entries.
> + *
> + * If cnt==0 or cnt > r->size it acts the same as __ptr_ring_empty.
Logically, cnt = 0 should always be true, cnt > size should always be
false then?
Why do you want it to act as __ptr_ring_empty?
> + *
> + * The same requirements apply as described for __ptr_ring_empty.
Which is:
* However, if some other CPU consumes ring entries at the same time, the value
* returned is not guaranteed to be correct.
but it's not right here yes? consuming entries will just add more
space ...
Also:
* In this case - to avoid incorrectly detecting the ring
* as empty - the CPU consuming the ring entries is responsible
* for either consuming all ring entries until the ring is empty,
* or synchronizing with some other CPU and causing it to
* re-test __ptr_ring_empty and/or consume the ring enteries
* after the synchronization point.
how would you apply this here?
> + */
> +static inline bool __ptr_ring_spare(struct ptr_ring *r, int cnt)
> +{
> + int size = r->size;
> + int to_check;
> +
> + if (unlikely(!size || cnt < 0))
> + return true;
> +
> + if (cnt > size)
> + cnt = 0;
> +
> + to_check = READ_ONCE(r->consumer_head) - cnt;
> +
> + if (to_check < 0)
> + to_check += size;
> +
> + return !r->queue[to_check];
> +}
> +
I will have to look at how this is used to understand if it's
correct. But I think we need better documentation.
> +static inline bool ptr_ring_spare(struct ptr_ring *r, int cnt)
> +{
> + bool ret;
> +
> + spin_lock(&r->consumer_lock);
> + ret = __ptr_ring_spare(r, cnt);
> + spin_unlock(&r->consumer_lock);
> +
> + return ret;
I don't understand why you take the consumer lock here.
If a producer is running it will make the value wrong,
if consumer is running it will just create more space.
> +}
> +
> +static inline bool ptr_ring_spare_irq(struct ptr_ring *r, int cnt)
> +{
> + bool ret;
> +
> + spin_lock_irq(&r->consumer_lock);
> + ret = __ptr_ring_spare(r, cnt);
> + spin_unlock_irq(&r->consumer_lock);
> +
> + return ret;
> +}
> +
> +static inline bool ptr_ring_spare_any(struct ptr_ring *r, int cnt)
> +{
> + unsigned long flags;
> + bool ret;
> +
> + spin_lock_irqsave(&r->consumer_lock, flags);
> + ret = __ptr_ring_spare(r, cnt);
> + spin_unlock_irqrestore(&r->consumer_lock, flags);
> +
> + return ret;
> +}
> +
> +static inline bool ptr_ring_spare_bh(struct ptr_ring *r, int cnt)
> +{
> + bool ret;
> +
> + spin_lock_bh(&r->consumer_lock);
> + ret = __ptr_ring_spare(r, cnt);
> + spin_unlock_bh(&r->consumer_lock);
> +
> + return ret;
> +}
> +
> /* Must only be called after __ptr_ring_peek returned !NULL */
> static inline void __ptr_ring_discard_one(struct ptr_ring *r)
> {
> --
> 2.43.0
next prev parent reply other threads:[~2025-09-03 13:05 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-02 8:09 [PATCH net-next v4 0/4] TUN/TAP & vhost_net: netdev queue flow control to avoid ptr_ring tail drop Simon Schippers
2025-09-02 8:09 ` [PATCH 1/4] ptr_ring_spare: Helper to check if spare capacity of size cnt is available Simon Schippers
2025-09-02 21:13 ` Willem de Bruijn
2025-09-03 3:13 ` Jason Wang
2025-09-03 13:05 ` Michael S. Tsirkin [this message]
2025-09-03 18:29 ` Simon Schippers
2025-09-02 8:09 ` [PATCH 2/4] netdev queue flow control for TUN Simon Schippers
2025-09-02 21:20 ` Willem de Bruijn
2025-09-03 18:35 ` Simon Schippers
2025-09-02 21:31 ` Willem de Bruijn
2025-09-03 3:27 ` Jason Wang
2025-09-03 18:41 ` Simon Schippers
2025-09-03 13:10 ` Michael S. Tsirkin
2025-09-03 18:45 ` Simon Schippers
2025-09-03 13:13 ` Michael S. Tsirkin
2025-09-03 18:49 ` Simon Schippers
2025-09-02 8:09 ` [PATCH 3/4] netdev queue flow control for TAP Simon Schippers
2025-09-02 8:09 ` [PATCH 4/4] netdev queue flow control for vhost_net Simon Schippers
2025-09-02 21:31 ` Willem de Bruijn
2025-09-03 3:42 ` Jason Wang
2025-09-03 13:51 ` Willem de Bruijn
2025-09-04 2:47 ` Jason Wang
2025-09-10 20:22 ` Simon Schippers
2025-09-03 4:00 ` [PATCH net-next v4 0/4] TUN/TAP & vhost_net: netdev queue flow control to avoid ptr_ring tail drop Jason Wang
2025-09-03 18:55 ` Simon Schippers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250903085610-mutt-send-email-mst@kernel.org \
--to=mst@redhat.com \
--cc=eperezma@redhat.com \
--cc=jasowang@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=simon.schippers@tu-dortmund.de \
--cc=stephen@networkplumber.org \
--cc=tim.gebauer@tu-dortmund.de \
--cc=virtualization@lists.linux.dev \
--cc=willemdebruijn.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.