From: Chuck Lever <cel@kernel.org>
To: NeilBrown <neil@brown.name>, Jeff Layton <jlayton@kernel.org>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <dai.ngo@oracle.com>, Tom Talpey <tom@talpey.com>
Cc: <linux-nfs@vger.kernel.org>, Chuck Lever <chuck.lever@oracle.com>
Subject: [RFC PATCH v1] svcrdma: Release transport resources synchronously
Date: Wed, 3 Sep 2025 11:53:35 -0400 [thread overview]
Message-ID: <20250903155335.1558-1-cel@kernel.org> (raw)
From: Chuck Lever <chuck.lever@oracle.com>
NFSD has always supported added network listeners. The new netlink
protocol now enables the removal of listeners.
Olga noticed that if an RDMA listener is removed and immediately
re-added, the deferred __svc_rdma_free() function might not have
run yet, so some or all of the old listener's RDMA resources
linger, which prevents a new listener on the same address from
being created.
Also, svc_xprt_free() does a module_put() just after calling
->xpo_free(). That means if there is deferred work going on, the
module could be unloaded before that work is even started,
resulting in a UAF.
Neil asks:
> What particular part of __svc_rdma_free() needs to run in order for a
> subsequent registration to succeed?
> Can that bit be run directory from svc_rdma_free() rather than be
> delayed?
> (I know almost nothing about rdma so forgive me if the answers to these
> questions seems obvious)
The reasons I can recall are:
- Some of the transport tear-down work can sleep
- Releasing a cm_id is tricky and can deadlock
We might be able to mitigate the second issue with judicious
application of transport reference counting.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Suggested-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
net/sunrpc/svc_xprt.c | 1 +
net/sunrpc/xprtrdma/svc_rdma_transport.c | 19 ++++++++-----------
2 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 8b1837228799..8526bfc3ab20 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -168,6 +168,7 @@ static void svc_xprt_free(struct kref *kref)
struct svc_xprt *xprt =
container_of(kref, struct svc_xprt, xpt_ref);
struct module *owner = xprt->xpt_class->xcl_owner;
+
if (test_bit(XPT_CACHE_AUTH, &xprt->xpt_flags))
svcauth_unix_info_release(xprt);
put_cred(xprt->xpt_cred);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 3d7f1413df02..b7b318ad25c4 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -591,12 +591,18 @@ static void svc_rdma_detach(struct svc_xprt *xprt)
rdma_disconnect(rdma->sc_cm_id);
}
-static void __svc_rdma_free(struct work_struct *work)
+/**
+ * svc_rdma_free - Release class-specific transport resources
+ * @xprt: Generic svc transport object
+ */
+static void svc_rdma_free(struct svc_xprt *xprt)
{
struct svcxprt_rdma *rdma =
- container_of(work, struct svcxprt_rdma, sc_work);
+ container_of(xprt, struct svcxprt_rdma, sc_xprt);
struct ib_device *device = rdma->sc_cm_id->device;
+ might_sleep();
+
/* This blocks until the Completion Queues are empty */
if (rdma->sc_qp && !IS_ERR(rdma->sc_qp))
ib_drain_qp(rdma->sc_qp);
@@ -629,15 +635,6 @@ static void __svc_rdma_free(struct work_struct *work)
kfree(rdma);
}
-static void svc_rdma_free(struct svc_xprt *xprt)
-{
- struct svcxprt_rdma *rdma =
- container_of(xprt, struct svcxprt_rdma, sc_xprt);
-
- INIT_WORK(&rdma->sc_work, __svc_rdma_free);
- schedule_work(&rdma->sc_work);
-}
-
static int svc_rdma_has_wspace(struct svc_xprt *xprt)
{
struct svcxprt_rdma *rdma =
--
2.50.0
next reply other threads:[~2025-09-03 15:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-03 15:53 Chuck Lever [this message]
2025-09-04 15:43 ` [RFC PATCH v1] svcrdma: Release transport resources synchronously Olga Kornievskaia
2025-09-04 15:48 ` Chuck Lever
2025-09-10 17:14 ` Olga Kornievskaia
2025-09-10 17:26 ` Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250903155335.1558-1-cel@kernel.org \
--to=cel@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=dai.ngo@oracle.com \
--cc=jlayton@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=neil@brown.name \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.