From: E Shattow <e@freeshell.de>
To: Rick Chen <rick@andestech.com>, Leo <ycliang@andestech.com>,
Minda Chen <minda.chen@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
Tom Rini <trini@konsulko.com>
Cc: u-boot@lists.denx.de, E Shattow <e@freeshell.de>,
Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Subject: [PATCH v2 2/4] riscv: dts: starfive: sync visionfive2 overrides with upstream Linux for-next
Date: Thu, 4 Sep 2025 22:02:30 -0700 [thread overview]
Message-ID: <20250905050301.900528-3-e@freeshell.de> (raw)
In-Reply-To: <20250905050301.900528-1-e@freeshell.de>
Sync automatic dtsi inclusion overrides for JH7110 CPU with upstream
"riscv: dts: starfive: jh7110: bootph-pre-ram hinting needed by boot
loader" from upstream Linux conor/riscv-dt-for-next commit 8181cc2f3f21
Signed-off-by: E Shattow <e@freeshell.de>
---
arch/riscv/dts/jh7110-u-boot.dtsi | 81 ++++++++++++-------------------
1 file changed, 31 insertions(+), 50 deletions(-)
diff --git a/arch/riscv/dts/jh7110-u-boot.dtsi b/arch/riscv/dts/jh7110-u-boot.dtsi
index f8d13277d24..cc27dd648f8 100644
--- a/arch/riscv/dts/jh7110-u-boot.dtsi
+++ b/arch/riscv/dts/jh7110-u-boot.dtsi
@@ -3,36 +3,10 @@
* Copyright (C) 2022 StarFive Technology Co., Ltd.
*/
-#include <dt-bindings/reset/starfive,jh7110-crg.h>
-
-/ {
- timer {
- compatible = "riscv,timer";
- interrupts-extended = <&cpu0_intc 5>,
- <&cpu1_intc 5>,
- <&cpu2_intc 5>,
- <&cpu3_intc 5>,
- <&cpu4_intc 5>;
- };
+// BEGIN "riscv: dts: starfive: jh7110: bootph-pre-ram hinting needed by boot loader"
+// From upstream Linux conor/riscv-dt-for-next commit 8181cc2f3f21
- soc {
- bootph-pre-ram;
-
- dmc: dmc@15700000 {
- bootph-pre-ram;
- compatible = "starfive,jh7110-dmc";
- reg = <0x0 0x15700000 0x0 0x10000>,
- <0x0 0x13000000 0x0 0x10000>;
- resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
- <&syscrg JH7110_SYSRST_DDR_OSC>,
- <&syscrg JH7110_SYSRST_DDR_APB>;
- reset-names = "axi", "osc", "apb";
- clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
- clock-names = "pll1_out";
- clock-frequency = <2133>;
- };
- };
-};
+#include <dt-bindings/reset/starfive,jh7110-crg.h>
&clint {
bootph-pre-ram;
@@ -58,22 +32,10 @@
bootph-pre-ram;
};
-&cpus {
- bootph-pre-ram;
-};
-
&osc {
bootph-pre-ram;
};
-&gmac0_rgmii_rxin {
- bootph-pre-ram;
-};
-
-&gmac0_rmii_refin {
- bootph-pre-ram;
-};
-
&gmac1_rgmii_rxin {
bootph-pre-ram;
};
@@ -82,23 +44,42 @@
bootph-pre-ram;
};
-&aoncrg {
- bootph-pre-ram;
+/ {
+ soc {
+ memory-controller@15700000 {
+ compatible = "starfive,jh7110-dmc";
+ reg = <0x0 0x15700000 0x0 0x10000>,
+ <0x0 0x13000000 0x0 0x10000>;
+ bootph-pre-ram;
+ clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
+ clock-names = "pll";
+ resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
+ <&syscrg JH7110_SYSRST_DDR_OSC>,
+ <&syscrg JH7110_SYSRST_DDR_APB>;
+ reset-names = "axi", "osc", "apb";
+ };
+ };
};
-&pllclk {
+&syscrg {
bootph-pre-ram;
};
-&syscrg {
- assigned-clock-rates = <0>; /* cpufreq not implemented, use defaults */
+&pllclk {
bootph-pre-ram;
};
-&stgcrg {
- bootph-pre-ram;
+// END "riscv: dts: starfive: jh7110: bootph-pre-ram hinting needed by boot loader"
+
+/ {
+ soc {
+ memory-controller@15700000 {
+ clock-frequency = <2133>; /* FIXME: delete property and implement CCF */
+ };
+ };
};
-&sys_syscon {
- bootph-pre-ram;
+&syscrg {
+ assigned-clock-rates = <0>; /* FIXME: delete property and implement cpufreq */
};
+
--
2.50.0
next prev parent reply other threads:[~2025-09-05 5:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-05 5:02 [PATCH v2 0/4] riscv: dts: starfive: prune redundant jh7110-common overrides E Shattow
2025-09-05 5:02 ` [PATCH v2 1/4] " E Shattow
2025-09-05 5:02 ` E Shattow [this message]
2025-09-05 5:02 ` [PATCH v2 3/4] riscv: dts: starfive: visionfive2 depend on SYS_CPU automatic dtsi inclusion E Shattow
2025-09-05 5:02 ` [PATCH v2 4/4] riscv: dts: starfive: visionfive2 depend on SYS_CONFIG_NAME " E Shattow
2025-09-16 23:57 ` E Shattow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250905050301.900528-3-e@freeshell.de \
--to=e@freeshell.de \
--cc=hal.feng@starfivetech.com \
--cc=heinrich.schuchardt@canonical.com \
--cc=minda.chen@starfivetech.com \
--cc=rick@andestech.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.