All of lore.kernel.org
 help / color / mirror / Atom feed
From: srini@kernel.org
To: gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org,
	Christian Marangi <ansuelsmth@gmail.com>,
	Srinivas Kandagatla <srini@kernel.org>
Subject: [PATCH 5/5] nvmem: an8855: Add support for Airoha AN8855 Switch EFUSE
Date: Fri, 12 Sep 2025 14:14:15 +0100	[thread overview]
Message-ID: <20250912131415.303407-6-srini@kernel.org> (raw)
In-Reply-To: <20250912131415.303407-1-srini@kernel.org>

From: Christian Marangi <ansuelsmth@gmail.com>

Add support for Airoha AN8855 Switch EFUSE. These EFUSE might be used
for calibration data for the internal switch PHYs.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
---
 drivers/nvmem/Kconfig        | 11 ++++++
 drivers/nvmem/Makefile       |  2 ++
 drivers/nvmem/an8855-efuse.c | 68 ++++++++++++++++++++++++++++++++++++
 3 files changed, 81 insertions(+)
 create mode 100644 drivers/nvmem/an8855-efuse.c

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index f3b8ffa77528..e0d88d3199c1 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -28,6 +28,17 @@ source "drivers/nvmem/layouts/Kconfig"
 
 # Devices
 
+config NVMEM_AN8855_EFUSE
+	tristate "Airoha AN8855 eFuse support"
+	depends on MFD_AIROHA_AN8855 || COMPILE_TEST
+	help
+	  Say y here to enable support for reading eFuses on Airoha AN8855
+	  Switch. These are e.g. used to store factory programmed
+	  calibration data required for the PHY.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called nvmem-an8855-efuse.
+
 config NVMEM_APPLE_EFUSES
 	tristate "Apple eFuse support"
 	depends on ARCH_APPLE || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 5634945f8196..70a4464dcb1e 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -10,6 +10,8 @@ nvmem_layouts-y			:= layouts.o
 obj-y				+= layouts/
 
 # Devices
+obj-$(CONFIG_NVMEM_AN8855_EFUSE)	+= nvmem-an8855-efuse.o
+nvmem-an8855-efuse-y 			:= an8855-efuse.o
 obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
 nvmem-apple-efuses-y 			:= apple-efuses.o
 obj-$(CONFIG_NVMEM_APPLE_SPMI)		+= apple_nvmem_spmi.o
diff --git a/drivers/nvmem/an8855-efuse.c b/drivers/nvmem/an8855-efuse.c
new file mode 100644
index 000000000000..d1afde6f623f
--- /dev/null
+++ b/drivers/nvmem/an8855-efuse.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Airoha AN8855 Switch EFUSE Driver
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define AN8855_EFUSE_CELL		50
+
+#define AN8855_EFUSE_DATA0		0x1000a500
+#define   AN8855_EFUSE_R50O		GENMASK(30, 24)
+
+static int an8855_efuse_read(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct regmap *regmap = context;
+
+	return regmap_bulk_read(regmap, AN8855_EFUSE_DATA0 + offset,
+				val, bytes / sizeof(u32));
+}
+
+static int an8855_efuse_probe(struct platform_device *pdev)
+{
+	struct nvmem_config an8855_nvmem_config = {
+		.name = "an8855-efuse",
+		.size = AN8855_EFUSE_CELL * sizeof(u32),
+		.stride = sizeof(u32),
+		.word_size = sizeof(u32),
+		.reg_read = an8855_efuse_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct nvmem_device *nvmem;
+	struct regmap *regmap;
+
+	/* Assign NVMEM priv to MFD regmap */
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return -ENOENT;
+
+	an8855_nvmem_config.priv = regmap;
+	an8855_nvmem_config.dev = dev;
+	nvmem = devm_nvmem_register(dev, &an8855_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id an8855_efuse_of_match[] = {
+	{ .compatible = "airoha,an8855-efuse", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, an8855_efuse_of_match);
+
+static struct platform_driver an8855_efuse_driver = {
+	.probe = an8855_efuse_probe,
+	.driver = {
+		.name = "an8855-efuse",
+		.of_match_table = an8855_efuse_of_match,
+	},
+};
+module_platform_driver(an8855_efuse_driver);
+
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_DESCRIPTION("Driver for AN8855 Switch EFUSE");
+MODULE_LICENSE("GPL");
-- 
2.50.0


      parent reply	other threads:[~2025-09-12 13:14 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-12 13:14 [PATCH 0/5] nvmem: patches for 6.18 srini
2025-09-12 13:14 ` [PATCH 1/5] dt-bindings: nvmem: Add the nxp,s32g-ocotp yaml file srini
2025-09-12 13:14 ` [PATCH 2/5] nvmem: s32g-ocotp: Add driver for S32G OCOTP srini
2025-09-12 13:14 ` [PATCH 3/5] dt-bindings: nvmem: sl28cpld: add sa67mcu compatible srini
2025-09-12 13:14 ` [PATCH 4/5] dt-bindings: nvmem: Document support for Airoha AN8855 Switch EFUSE srini
2025-09-12 13:14 ` srini [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250912131415.303407-6-srini@kernel.org \
    --to=srini@kernel.org \
    --cc=ansuelsmth@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.