From: Leon Romanovsky <leonro@nvidia.com>
To: Siva Reddy Kallam <siva.kallam@broadcom.com>
Cc: Simon Horman <horms@kernel.org>, <jgg@nvidia.com>,
<linux-rdma@vger.kernel.org>, <netdev@vger.kernel.org>,
<vikas.gupta@broadcom.com>, <selvin.xavier@broadcom.com>,
<anand.subramanian@broadcom.com>,
Usman Ansari <usman.ansari@broadcom.com>
Subject: Re: [PATCH 5/8] RDMA/bng_re: Add infrastructure for enabling Firmware channel
Date: Mon, 15 Sep 2025 12:00:30 +0300 [thread overview]
Message-ID: <20250915090030.GB9353@unreal> (raw)
In-Reply-To: <CAMet4B7SJXk1yMsJ61a026U3wNKr-7oNX9_-V+_W1PA0VRaaTQ@mail.gmail.com>
On Mon, Sep 15, 2025 at 02:14:19PM +0530, Siva Reddy Kallam wrote:
> On Fri, Sep 12, 2025 at 2:09 PM Simon Horman <horms@kernel.org> wrote:
> >
> > On Fri, Aug 29, 2025 at 12:30:39PM +0000, Siva Reddy Kallam wrote:
> > > Add infrastructure for enabling Firmware channel.
> > >
> > > Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
> > > Reviewed-by: Usman Ansari <usman.ansari@broadcom.com>
> >
> > ...
> >
> > > diff --git a/drivers/infiniband/hw/bng_re/bng_fw.c b/drivers/infiniband/hw/bng_re/bng_fw.c
> >
> > ...
> >
> > > +/* function events */
> > > +static int bng_re_process_func_event(struct bng_re_rcfw *rcfw,
> > > + struct creq_func_event *func_event)
> > > +{
> > > + int rc;
> > > +
> > > + switch (func_event->event) {
> > > + case CREQ_FUNC_EVENT_EVENT_TX_WQE_ERROR:
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_TX_DATA_ERROR:
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_RX_WQE_ERROR:
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_RX_DATA_ERROR:
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_CQ_ERROR:
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_TQM_ERROR:
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_CFCQ_ERROR:
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_CFCS_ERROR:
> > > + /* SRQ ctx error, call srq_handler??
> > > + * But there's no SRQ handle!
> > > + */
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_CFCC_ERROR:
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_CFCM_ERROR:
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_TIM_ERROR:
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_VF_COMM_REQUEST:
> > > + break;
> > > + case CREQ_FUNC_EVENT_EVENT_RESOURCE_EXHAUSTED:
> > > + break;
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +
> > > + return rc;
> >
> > rc does not appear to be initialised in this function.
> >
> > Flagged by Clang 20.1.8 with -Wuninitialized
>
> Thank you for the review. We will fix it in the next version of the patchset.
Once you are fixing it, please squeeze you switch-case to be something
like that:
switch (func_event->event) {
case CREQ_FUNC_EVENT_EVENT_TX_WQE_ERROR:
case CREQ_FUNC_EVENT_EVENT_TX_DATA_ERROR:
case CREQ_FUNC_EVENT_EVENT_RX_WQE_ERROR:
....
break;
default:
return -EINVAL;
}
Thanks
>
> >
> > > +}
> >
> > ...
> >
> > > +int bng_re_enable_fw_channel(struct bng_re_rcfw *rcfw,
> > > + int msix_vector,
> > > + int cp_bar_reg_off)
> > > +{
> > > + struct bng_re_cmdq_ctx *cmdq;
> > > + struct bng_re_creq_ctx *creq;
> > > + int rc;
> > > +
> > > + cmdq = &rcfw->cmdq;
> > > + creq = &rcfw->creq;
> >
> > Conversely, creq is initialised here but otherwise unused in this function.
> >
> > Flagged by GCC 15.1.0 and Clang 20.1.8 with -Wunused-but-set-variable
>
> Thank you for the review. We will fix it in the next version of the patchset.
>
> >
> > > +
> > > + /* Assign defaults */
> > > + cmdq->seq_num = 0;
> > > + set_bit(FIRMWARE_FIRST_FLAG, &cmdq->flags);
> > > + init_waitqueue_head(&cmdq->waitq);
> > > +
> > > + rc = bng_re_map_cmdq_mbox(rcfw);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + rc = bng_re_map_creq_db(rcfw, cp_bar_reg_off);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + rc = bng_re_rcfw_start_irq(rcfw, msix_vector, true);
> > > + if (rc) {
> > > + dev_err(&rcfw->pdev->dev,
> > > + "Failed to request IRQ for CREQ rc = 0x%x\n", rc);
> > > + bng_re_disable_rcfw_channel(rcfw);
> > > + return rc;
> > > + }
> > > +
> > > + return 0;
> > > +}
> >
> > ...
>
next prev parent reply other threads:[~2025-09-15 9:01 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-29 12:30 [PATCH 0/8] Introducing Broadcom BNG_RE RoCE Driver Siva Reddy Kallam
2025-08-29 12:30 ` [PATCH 1/8] bng_en: Add RoCE aux device support Siva Reddy Kallam
2025-09-01 19:10 ` Jakub Kicinski
2025-08-29 12:30 ` [PATCH 2/8] RDMA/bng_re: Add Auxiliary interface Siva Reddy Kallam
2025-09-16 12:34 ` Simon Horman
2025-09-17 9:17 ` Siva Reddy Kallam
2025-08-29 12:30 ` [PATCH 3/8] RDMA/bng_re: Register and get the resources from bnge driver Siva Reddy Kallam
2025-08-29 12:30 ` [PATCH 4/8] RDMA/bng_re: Allocate required memory resources for Firmware channel Siva Reddy Kallam
2025-08-29 12:30 ` [PATCH 5/8] RDMA/bng_re: Add infrastructure for enabling " Siva Reddy Kallam
2025-09-12 8:39 ` Simon Horman
2025-09-15 8:44 ` Siva Reddy Kallam
2025-09-15 9:00 ` Leon Romanovsky [this message]
2025-09-15 10:09 ` Siva Reddy Kallam
2025-08-29 12:30 ` [PATCH 6/8] RDMA/bng_re: Enable Firmware channel and query device attributes Siva Reddy Kallam
2025-09-12 8:42 ` Simon Horman
2025-09-15 8:46 ` Siva Reddy Kallam
2025-08-29 12:30 ` [PATCH 7/8] RDMA/bng_re: Add basic debugfs infrastructure Siva Reddy Kallam
2025-08-29 12:30 ` [PATCH 8/8] RDMA/bng_re: Initialize the Firmware and Hardware Siva Reddy Kallam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250915090030.GB9353@unreal \
--to=leonro@nvidia.com \
--cc=anand.subramanian@broadcom.com \
--cc=horms@kernel.org \
--cc=jgg@nvidia.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=selvin.xavier@broadcom.com \
--cc=siva.kallam@broadcom.com \
--cc=usman.ansari@broadcom.com \
--cc=vikas.gupta@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.