From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Cc: devicetree@vger.kernel.org, andrew@codeconstruct.com.au,
conor+dt@kernel.org, krzk+dt@kernel.org, robh@kernel.org,
eajames@linux.ibm.com
Subject: [PATCH v5 6/6] ARM: dts: aspeed: Fix max31785 fan node naming
Date: Wed, 17 Sep 2025 09:42:10 -0500 [thread overview]
Message-ID: <20250917144210.160051-7-eajames@linux.ibm.com> (raw)
In-Reply-To: <20250917144210.160051-1-eajames@linux.ibm.com>
Now that the max31785 is properly documented, fix up the uses of
it in the Aspeed dts.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
.../arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts | 6 ++----
.../arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts | 10 ++++------
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts | 2 --
.../arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts | 14 ++++++--------
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 10 ++++------
.../boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts | 2 --
6 files changed, 16 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
index 2f5d4075a64ad..36e6bbfdeb30a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -273,16 +273,14 @@ eeprom@51 {
max31785@52 {
compatible = "maxim,max31785a";
reg = <0x52>;
- #address-cells = <1>;
- #size-cells = <0>;
- fan0: fan@0 {
+ fan0: fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
- fan1: fan@1 {
+ fan1: fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
index 9f144f527f03b..db20a3b740836 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -2061,29 +2061,27 @@ i2c14mux0chn3: i2c@3 {
max31785@52 {
compatible = "maxim,max31785a";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x52>;
- fan@0 {
+ fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
- fan@1 {
+ fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
};
- fan@2 {
+ fan-2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
};
- fan@3 {
+ fan-3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
index 9a43fc7bcebe9..e312bfc2c5bda 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
@@ -2053,8 +2053,6 @@ i2c14mux0chn3: i2c@3 {
pwm@52 {
compatible = "maxim,max31785a";
reg = <0x52>;
- #address-cells = <1>;
- #size-cells = <0>;
};
led-controller@60 {
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
index c5fb5d410001b..8a5f4131787f1 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -1076,40 +1076,38 @@ tmp275@48 {
max: max31785@52 {
compatible = "maxim,max31785a";
reg = <0x52>;
- #address-cells = <1>;
- #size-cells = <0>;
- fan0: fan@0 {
+ fan0: fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
- fan1: fan@1 {
+ fan1: fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
};
- fan2: fan@2 {
+ fan2: fan-2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
};
- fan3: fan@3 {
+ fan3: fan-3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
};
- fan4: fan@4 {
+ fan4: fan-4 {
compatible = "pmbus-fan";
reg = <4>;
tach-pulses = <2>;
};
- fan5: fan@5 {
+ fan5: fan-5 {
compatible = "pmbus-fan";
reg = <5>;
tach-pulses = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index b31eb8e58c6b4..bc83605bdf497 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -477,10 +477,8 @@ bmp: bmp280@77 {
max31785@52 {
compatible = "maxim,max31785a";
reg = <0x52>;
- #address-cells = <1>;
- #size-cells = <0>;
- fan@0 {
+ fan-0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
@@ -493,7 +491,7 @@ fan@0 {
maxim,fan-fault-pin-mon;
};
- fan@1 {
+ fan-1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
@@ -506,7 +504,7 @@ fan@1 {
maxim,fan-fault-pin-mon;
};
- fan@2 {
+ fan-2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
@@ -519,7 +517,7 @@ fan@2 {
maxim,fan-fault-pin-mon;
};
- fan@3 {
+ fan-3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
index 89907b628b655..f26df3c8cc261 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
@@ -360,8 +360,6 @@ bmp: bmp280@77 {
max31785@52 {
compatible = "maxim,max31785a";
reg = <0x52>;
- #address-cells = <1>;
- #size-cells = <0>;
};
dps: dps310@76 {
--
2.51.0
next prev parent reply other threads:[~2025-09-17 14:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-17 14:42 [PATCH v5 0/6] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-17 14:42 ` [PATCH v5 1/6] dt-bindings: arm: aspeed: add IBM Balcones board Eddie James
2025-09-17 14:42 ` [PATCH v5 2/6] dt-bindings: arm: aspeed: add IBM Bonnell board Eddie James
2025-09-17 15:46 ` Rob Herring
2025-09-17 14:42 ` [PATCH v5 3/6] dt-bindings: iio: Add Infineon DPS310 sensor documentation Eddie James
2025-09-17 14:42 ` [PATCH v5 4/6] dt-bindings: hwmon: Move max31785 compatibles to max31790 document Eddie James
2025-09-17 14:42 ` [PATCH v5 5/6] ARM: dts: aspeed: Add Balcones system Eddie James
2025-09-17 14:42 ` Eddie James [this message]
2025-09-18 0:39 ` [PATCH v5 0/6] " Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250917144210.160051-7-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.