Re: [PATCH v3 1/3] dt-bindings: max77705: add interrupt-controller node

[Rob Herring <robh@kernel.org>]

On Fri, Sep 12, 2025 at 07:47:01PM +0300, Dzmitry Sankouski wrote:
> Add interrupt-controller node, because it has dedicated interrupt source
> register, to determine which sub device triggered an interrupt.

The subject and commit msg are wrong. You aren't adding a node.

> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
> ---
>  Documentation/devicetree/bindings/mfd/maxim,max77705.yaml | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml
> index 0ec89f0adc64..d265c8213a08 100644
> --- a/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml
> +++ b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml
> @@ -26,6 +26,18 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  interrupt-controller:
> +    description:
> +      The driver implements an interrupt controller for the sub devices.
> +      The interrupt number mapping is as follows
> +      0 - charger
> +      1 - topsys
> +      2 - fuelgauge
> +      3 - usb type-c management block.
> +
> +  '#interrupt-cells':
> +    const: 1
> +
>    haptic:
>      type: object
>      additionalProperties: false
> @@ -120,8 +132,10 @@ examples:
>              reg = <0x66>;
>              interrupt-parent = <&pm8998_gpios>;
>              interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> +            interrupt-controller;
>              pinctrl-0 = <&chg_int_default>;
>              pinctrl-names = "default";
> +            #interrupt-cells = <1>;
>  
>              leds {
>                  compatible = "maxim,max77705-rgb";
> 
> -- 
> 2.39.5
>