[PATCH v2 4/4] PCI: mediatek: add support for Airoha AN7583 SoC

[Christian Marangi <ansuelsmth@gmail.com>]

Add support for the second PCIe line present on Airoha AN7583 SoC.

This is based on the Mediatek Gen1/2 PCIe driver and similar to Gen3
also require workaround for the reset signals.

Introduce a new bool to skip having to reset signals and also introduce
some additional logic to configure the PBUS registers required for
Airoha SoC.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/pci/controller/pcie-mediatek.c | 85 +++++++++++++++++++-------
 1 file changed, 63 insertions(+), 22 deletions(-)

diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index 24cc30a2ab6c..640d1f1a6478 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -147,6 +147,7 @@ struct mtk_pcie_port;
  * @need_fix_class_id: whether this host's class ID needed to be fixed or not
  * @need_fix_device_id: whether this host's device ID needed to be fixed or not
  * @no_msi: Bridge has no MSI support, and relies on an external block
+ * @skip_pcie_rstb: Skip calling RSTB bits on PCIe probe
  * @device_id: device ID which this host need to be fixed
  * @ops: pointer to configuration access functions
  * @startup: pointer to controller setting functions
@@ -156,6 +157,7 @@ struct mtk_pcie_soc {
 	bool need_fix_class_id;
 	bool need_fix_device_id;
 	bool no_msi;
+	bool skip_pcie_rstb;
 	unsigned int device_id;
 	struct pci_ops *ops;
 	int (*startup)(struct mtk_pcie_port *port);
@@ -679,28 +681,30 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
 		regmap_update_bits(pcie->cfg, PCIE_SYS_CFG_V2, val, val);
 	}
 
-	/* Assert all reset signals */
-	writel(0, port->base + PCIE_RST_CTRL);
-
-	/*
-	 * Enable PCIe link down reset, if link status changed from link up to
-	 * link down, this will reset MAC control registers and configuration
-	 * space.
-	 */
-	writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
-
-	/*
-	 * Described in PCIe CEM specification sections 2.2 (PERST# Signal) and
-	 * 2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should
-	 * be delayed 100ms (TPVPERL) for the power and clock to become stable.
-	 */
-	msleep(100);
-
-	/* De-assert PHY, PE, PIPE, MAC and configuration reset	*/
-	val = readl(port->base + PCIE_RST_CTRL);
-	val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
-	       PCIE_MAC_SRSTB | PCIE_CRSTB;
-	writel(val, port->base + PCIE_RST_CTRL);
+	if (!soc->skip_pcie_rstb) {
+		/* Assert all reset signals */
+		writel(0, port->base + PCIE_RST_CTRL);
+
+		/*
+		 * Enable PCIe link down reset, if link status changed from link up to
+		 * link down, this will reset MAC control registers and configuration
+		 * space.
+		 */
+		writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
+
+		/*
+		 * Described in PCIe CEM specification sections 2.2 (PERST# Signal) and
+		 * 2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should
+		 * be delayed 100ms (TPVPERL) for the power and clock to become stable.
+		 */
+		msleep(100);
+
+		/* De-assert PHY, PE, PIPE, MAC and configuration reset	*/
+		val = readl(port->base + PCIE_RST_CTRL);
+		val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
+		       PCIE_MAC_SRSTB | PCIE_CRSTB;
+		writel(val, port->base + PCIE_RST_CTRL);
+	}
 
 	/* Set up vendor ID and class code */
 	if (soc->need_fix_class_id) {
@@ -1105,6 +1109,33 @@ static int mtk_pcie_probe(struct platform_device *pdev)
 	if (err)
 		goto put_resources;
 
+	if (device_is_compatible(dev, "airoha,an7583-pcie")) {
+		struct resource_entry *entry;
+		struct regmap *pbus_regmap;
+		resource_size_t addr;
+		u32 args[2], size;
+
+		/*
+		 * Configure PBus base address and base address mask to allow the
+		 * hw to detect if a given address is accessible on PCIe controller.
+		 */
+		pbus_regmap = syscon_regmap_lookup_by_phandle_args(dev->of_node,
+								   "mediatek,pbus-csr",
+								   ARRAY_SIZE(args),
+								   args);
+		if (IS_ERR(pbus_regmap))
+			return PTR_ERR(pbus_regmap);
+
+		entry = resource_list_first_type(&host->windows, IORESOURCE_MEM);
+		if (!entry)
+			return -ENODEV;
+
+		addr = entry->res->start - entry->offset;
+		regmap_write(pbus_regmap, args[0], lower_32_bits(addr));
+		size = lower_32_bits(resource_size(entry->res));
+		regmap_write(pbus_regmap, args[1], GENMASK(31, __fls(size)));
+	}
+
 	return 0;
 
 put_resources:
@@ -1205,6 +1236,15 @@ static const struct mtk_pcie_soc mtk_pcie_soc_mt7622 = {
 	.setup_irq = mtk_pcie_setup_irq,
 };
 
+static const struct mtk_pcie_soc mtk_pcie_soc_an7583 = {
+	.skip_pcie_rstb = true,
+	.need_fix_class_id = true,
+	.need_fix_device_id = false,
+	.ops = &mtk_pcie_ops_v2,
+	.startup = mtk_pcie_startup_port_v2,
+	.setup_irq = mtk_pcie_setup_irq,
+};
+
 static const struct mtk_pcie_soc mtk_pcie_soc_mt7629 = {
 	.need_fix_class_id = true,
 	.need_fix_device_id = true,
@@ -1215,6 +1255,7 @@ static const struct mtk_pcie_soc mtk_pcie_soc_mt7629 = {
 };
 
 static const struct of_device_id mtk_pcie_ids[] = {
+	{ .compatible = "airoha,an7583-pcie", .data = &mtk_pcie_soc_an7583 },
 	{ .compatible = "mediatek,mt2701-pcie", .data = &mtk_pcie_soc_v1 },
 	{ .compatible = "mediatek,mt7623-pcie", .data = &mtk_pcie_soc_v1 },
 	{ .compatible = "mediatek,mt2712-pcie", .data = &mtk_pcie_soc_mt2712 },
-- 
2.51.0