All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,phillip@squashfs.org.uk,akpm@linux-foundation.org
Subject: + squashfs-add-additional-inode-sanity-checking.patch added to mm-nonmm-unstable branch
Date: Wed, 24 Sep 2025 15:28:43 -0700	[thread overview]
Message-ID: <20250924222843.E64B2C4CEE7@smtp.kernel.org> (raw)


The patch titled
     Subject: Squashfs: add additional inode sanity checking
has been added to the -mm mm-nonmm-unstable branch.  Its filename is
     squashfs-add-additional-inode-sanity-checking.patch

This patch will shortly appear at
     https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/squashfs-add-additional-inode-sanity-checking.patch

This patch will later appear in the mm-nonmm-unstable branch at
    git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***

The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days

------------------------------------------------------
From: Phillip Lougher <phillip@squashfs.org.uk>
Subject: Squashfs: add additional inode sanity checking
Date: Tue, 23 Sep 2025 23:06:51 +0100

Patch series "Squashfs: performance improvement and a sanity check".

This patchset adds an additional sanity check when reading regular file
inodes, and adds support for SEEK_DATA/SEEK_HOLE lseek() whence values.


This patch (of 2):

Add an additional sanity check when reading regular file inodes.

A regular file if the file size is an exact multiple of the filesystem
block size cannot have a fragment.  This is because by definition a
fragment block stores tailends which are not a whole block in size.

Link: https://lkml.kernel.org/r/20250923220652.568416-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20250923220652.568416-2-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 fs/squashfs/inode.c |   20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

--- a/fs/squashfs/inode.c~squashfs-add-additional-inode-sanity-checking
+++ a/fs/squashfs/inode.c
@@ -144,8 +144,17 @@ int squashfs_read_inode(struct inode *in
 		if (err < 0)
 			goto failed_read;
 
+		inode->i_size = le32_to_cpu(sqsh_ino->file_size);
 		frag = le32_to_cpu(sqsh_ino->fragment);
 		if (frag != SQUASHFS_INVALID_FRAG) {
+			/*
+			 * the file cannot have a fragment (tailend) and have a
+			 * file size a multiple of the block size
+			 */
+			if ((inode->i_size & (msblk->block_size - 1)) == 0) {
+				err = -EINVAL;
+				goto failed_read;
+			}
 			frag_offset = le32_to_cpu(sqsh_ino->offset);
 			frag_size = squashfs_frag_lookup(sb, frag, &frag_blk);
 			if (frag_size < 0) {
@@ -159,7 +168,6 @@ int squashfs_read_inode(struct inode *in
 		}
 
 		set_nlink(inode, 1);
-		inode->i_size = le32_to_cpu(sqsh_ino->file_size);
 		inode->i_fop = &generic_ro_fops;
 		inode->i_mode |= S_IFREG;
 		inode->i_blocks = ((inode->i_size - 1) >> 9) + 1;
@@ -188,8 +196,17 @@ int squashfs_read_inode(struct inode *in
 		if (err < 0)
 			goto failed_read;
 
+		inode->i_size = le64_to_cpu(sqsh_ino->file_size);
 		frag = le32_to_cpu(sqsh_ino->fragment);
 		if (frag != SQUASHFS_INVALID_FRAG) {
+			/*
+			 * the file cannot have a fragment (tailend) and have a
+			 * file size a multiple of the block size
+			 */
+			if ((inode->i_size & (msblk->block_size - 1)) == 0) {
+				err = -EINVAL;
+				goto failed_read;
+			}
 			frag_offset = le32_to_cpu(sqsh_ino->offset);
 			frag_size = squashfs_frag_lookup(sb, frag, &frag_blk);
 			if (frag_size < 0) {
@@ -204,7 +221,6 @@ int squashfs_read_inode(struct inode *in
 
 		xattr_id = le32_to_cpu(sqsh_ino->xattr);
 		set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
-		inode->i_size = le64_to_cpu(sqsh_ino->file_size);
 		inode->i_op = &squashfs_inode_ops;
 		inode->i_fop = &generic_ro_fops;
 		inode->i_mode |= S_IFREG;
_

Patches currently in -mm which might be from phillip@squashfs.org.uk are

squashfs-fix-uninit-value-in-squashfs_get_parent.patch
squashfs-add-additional-inode-sanity-checking.patch
squashfs-add-seek_data-seek_hole-support.patch


                 reply	other threads:[~2025-09-24 22:28 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250924222843.E64B2C4CEE7@smtp.kernel.org \
    --to=akpm@linux-foundation.org \
    --cc=mm-commits@vger.kernel.org \
    --cc=phillip@squashfs.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.