[PATCH v2 3/5] i2c: davinci: calculate bus freq from Hz instead of kHz

[Marcus Folkesson <marcus.folkesson@gmail.com>]

The bus frequency is unnecessarily converted between Hz and kHz in
several places.
This is probably an old legacy from the old times (pre-devicetrees)
when the davinci_i2c_platform_data took the bus_freq in kHz.

Stick to Hz.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---
 drivers/i2c/busses/i2c-davinci.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 6a3d4e9e07f45ecc228943e877cde1fd9d72e8cb..82f295619c4d0ef108c57d13c10004aa25014cbf 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -117,8 +117,6 @@
 /* timeout for pm runtime autosuspend */
 #define DAVINCI_I2C_PM_TIMEOUT	1000	/* ms */
 
-#define DAVINCI_I2C_DEFAULT_BUS_FREQ	100
-
 struct davinci_i2c_dev {
 	struct device           *dev;
 	void __iomem		*base;
@@ -134,8 +132,8 @@ struct davinci_i2c_dev {
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block	freq_transition;
 #endif
-	/* standard bus frequency (kHz) */
-	unsigned int		bus_freq;
+	/* standard bus frequency */
+	unsigned int		bus_freq_hz;
 	/* Chip has a ICPFUNC register */
 	bool			has_pfunc;
 };
@@ -209,16 +207,16 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 	if (device_is_compatible(dev->dev, "ti,keystone-i2c"))
 		d = 6;
 
-	clk = ((input_clock / (psc + 1)) / (dev->bus_freq * 1000));
+	clk = ((input_clock / (psc + 1)) / (dev->bus_freq_hz));
 	/* Avoid driving the bus too fast because of rounding errors above */
-	if (input_clock / (psc + 1) / clk > dev->bus_freq * 1000)
+	if (input_clock / (psc + 1) / clk > dev->bus_freq_hz)
 		clk++;
 	/*
 	 * According to I2C-BUS Spec 2.1, in FAST-MODE LOW period should be at
 	 * least 1.3uS, which is not the case with 50% duty cycle. Driving HIGH
 	 * to LOW ratio as 1 to 2 is more safe.
 	 */
-	if (dev->bus_freq > 100)
+	if (dev->bus_freq_hz > 100000)
 		clkl = (clk << 1) / 3;
 	else
 		clkl = (clk >> 1);
@@ -269,7 +267,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 		davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG));
 	dev_dbg(dev->dev, "CLKH = %d\n",
 		davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG));
-	dev_dbg(dev->dev, "bus_freq = %dkHz\n", dev->bus_freq);
+	dev_dbg(dev->dev, "bus_freq_hz = %dHz\n", dev->bus_freq_hz);
 
 
 	/* Take the I2C module out of reset: */
@@ -761,9 +759,9 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 
 	r = device_property_read_u32(&pdev->dev, "clock-frequency", &prop);
 	if (r)
-		prop = DAVINCI_I2C_DEFAULT_BUS_FREQ;
+		prop = I2C_MAX_STANDARD_MODE_FREQ;
 
-	dev->bus_freq = prop / 1000;
+	dev->bus_freq_hz = prop;
 
 	dev->has_pfunc = device_property_present(&pdev->dev, "ti,has-pfunc");
 

-- 
2.50.1