From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Xiaowei Li <xiaowei.li@simcom.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 6.6 05/28] USB: serial: option: add SIMCom 8230C compositions
Date: Fri, 10 Oct 2025 15:16:23 +0200 [thread overview]
Message-ID: <20251010131330.559108353@linuxfoundation.org> (raw)
In-Reply-To: <20251010131330.355311487@linuxfoundation.org>
6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiaowei Li <xiaowei.li@simcom.com>
commit 0e0ba0ecec3d6e819e0c2348331ff99afe2eb5d5 upstream.
Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip.
USB Device Listings:
0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet (QMI mode) + adb
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9071 Rev= 5.15
S: Manufacturer=SIMCOM
S: Product=SDXBAAGHA-IDP _SN:D744C4C5
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x9078: tty (DM) + tty (NMEA) + tty (AT) + ECM + adb
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9078 Rev= 5.15
S: Manufacturer=SIMCOM
S: Product=SDXBAAGHA-IDP _SN:D744C4C5
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x907b: RNDIS + tty (DM) + tty (NMEA) + tty (AT) + adb
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=907b Rev= 5.15
S: Manufacturer=SIMCOM
S: Product=SDXBAAGHA-IDP _SN:D744C4C5
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=ef(misc ) Sub=04 Prot=01
I:* If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Xiaowei Li <xiaowei.li@simcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2114,6 +2114,12 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff), /* Simcom SIM7500/SIM7600 RNDIS mode */
.driver_info = RSVD(7) },
+ { USB_DEVICE(0x1e0e, 0x9071), /* Simcom SIM8230 RMNET mode */
+ .driver_info = RSVD(3) | RSVD(4) },
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9078, 0xff), /* Simcom SIM8230 ECM mode */
+ .driver_info = RSVD(5) },
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x907b, 0xff), /* Simcom SIM8230 RNDIS mode */
+ .driver_info = RSVD(5) },
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
next prev parent reply other threads:[~2025-10-10 13:22 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-10 13:16 [PATCH 6.6 00/28] 6.6.111-rc1 review Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 01/28] KVM: arm64: Fix softirq masking in FPSIMD register saving sequence Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 02/28] media: tunner: xc5000: Refactor firmware load Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 03/28] media: tuner: xc5000: Fix use-after-free in xc5000_release Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 04/28] media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe Greg Kroah-Hartman
2025-10-10 13:16 ` Greg Kroah-Hartman [this message]
2025-10-10 13:16 ` [PATCH 6.6 06/28] wifi: rtlwifi: rtl8192cu: Dont claim USB ID 07b8:8188 Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 07/28] ASoC: amd: acp: Adjust pdm gain value Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 08/28] dm-integrity: limit MAX_TAG_SIZE to 255 Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 09/28] platform/x86/amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 10/28] perf subcmd: avoid crash in exclude_cmds when excludes is empty Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 11/28] ASoC: rt5682s: Adjust SAR ADC button mode to fix noise issue Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 12/28] btrfs: ref-verify: handle damaged extent root tree Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 13/28] can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 14/28] can: rcar_canfd: Fix controller mode setting Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 15/28] platform/x86/amd/pmc: Add Stellaris Slim Gen6 AMD to spurious 8042 quirks list Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 16/28] ALSA: usb-audio: Kill timer properly at removal Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 17/28] ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_free Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 18/28] hid: fix I2C read buffer overflow in raw_event() for mcp2221 Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 19/28] serial: stm32: allow selecting console when the driver is module Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 20/28] staging: axis-fifo: fix maximum TX packet length check Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 21/28] staging: axis-fifo: fix TX handling on copy_from_user() failure Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 22/28] staging: axis-fifo: flush RX FIFO on read errors Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 23/28] driver core/PM: Set power.no_callbacks along with power.no_pm Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 24/28] riscv: mm: Use hint address in mmap if available Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 25/28] riscv: mm: Do not restrict mmap address based on hint Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 26/28] crypto: rng - Ensure set_ent is always present Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 27/28] net/9p: fix double req put in p9_fd_cancelled Greg Kroah-Hartman
2025-10-10 13:16 ` [PATCH 6.6 28/28] KVM: x86: Dont (re)check L1 intercepts when completing userspace I/O Greg Kroah-Hartman
2025-10-10 17:14 ` [PATCH 6.6 00/28] 6.6.111-rc1 review Jon Hunter
2025-10-10 22:21 ` Shuah Khan
2025-10-11 8:56 ` Naresh Kamboju
2025-10-11 10:55 ` Mark Brown
2025-10-11 11:50 ` Ron Economos
2025-10-11 17:03 ` Brett A C Sheffield
2025-10-11 19:24 ` Peter Schneider
2025-10-12 9:24 ` Miguel Ojeda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251010131330.559108353@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
--cc=xiaowei.li@simcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.