From: Stephen Hemminger <stephen@networkplumber.org>
To: vanshika.shukla@nxp.com
Cc: dev@dpdk.org, Thomas Monjalon <thomas@monjalon.net>,
Wathsala Vithanage <wathsala.vithanage@arm.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Gagandeep Singh <g.singh@nxp.com>,
Sachin Saxena <sachin.saxena@nxp.com>,
Anatoly Burakov <anatoly.burakov@intel.com>,
Apeksha Gupta <apeksha.gupta@nxp.com>
Subject: Re: [v1 01/12] net/enetc: Add initial ENETC4 PMD driver support
Date: Wed, 15 Oct 2025 14:34:21 -0700 [thread overview]
Message-ID: <20251015143421.2da77870@hermes.local> (raw)
In-Reply-To: <20251009111633.3585957-2-vanshika.shukla@nxp.com>
On Thu, 9 Oct 2025 16:46:22 +0530
vanshika.shukla@nxp.com wrote:
> From: Apeksha Gupta <apeksha.gupta@nxp.com>
>
> This patch introduces a new ENETC4 PMD driver for NXP's i.MX95
> SoC, enabling basic network operations. Key features include:
>
> - Probe and teardown functions
> - Hardware initialization for both Virtual Functions (VFs)
> and Physical Function (PF)
>
> Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
> Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
> Signed-off-by: Vanshika Shukla <vanshika.shukla@nxp.com>
> ---
> MAINTAINERS | 3 +
> config/arm/arm64_imx_linux_gcc | 17 ++
> config/arm/meson.build | 14 ++
> doc/guides/nics/enetc4.rst | 92 ++++++++
> doc/guides/nics/features/enetc4.ini | 9 +
> doc/guides/nics/index.rst | 1 +
> doc/guides/rel_notes/release_24_11.rst | 4 +
Release notes are in wrong place. This is for 25.11 release.
next prev parent reply other threads:[~2025-10-15 22:11 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-09 11:16 [v1 00/12] ENETC4 PMD support vanshika.shukla
2025-10-09 11:16 ` [v1 01/12] net/enetc: Add initial ENETC4 PMD driver support vanshika.shukla
2025-10-09 16:06 ` Hemant Agrawal
2025-10-15 21:34 ` Stephen Hemminger [this message]
2025-10-09 11:16 ` [v1 02/12] net/enetc: Add RX and TX queue APIs for ENETC4 PMD vanshika.shukla
2025-10-15 21:36 ` Stephen Hemminger
2025-10-15 21:42 ` Stephen Hemminger
2025-10-15 21:43 ` Stephen Hemminger
2025-10-15 21:50 ` Stephen Hemminger
2025-10-09 11:16 ` [v1 03/12] net/enetc: Optimize ENETC4 data path vanshika.shukla
2025-10-09 11:16 ` [v1 04/12] net/enetc: Add TX checksum offload and RX checksum validation vanshika.shukla
2025-10-09 11:16 ` [v1 05/12] net/enetc: Add basic statistics vanshika.shukla
2025-10-09 11:16 ` [v1 06/12] net/enetc: Add packet type parsing support vanshika.shukla
2025-10-09 11:16 ` [v1 07/12] net/enetc: Add support for multiple queues with RSS vanshika.shukla
2025-10-09 11:16 ` [v1 08/12] net/enetc: Add VF to PF messaging support and primary MAC setup vanshika.shukla
2025-10-15 21:53 ` Stephen Hemminger
2025-10-09 11:16 ` [v1 09/12] net/enetc: Add multicast and promiscuous mode support vanshika.shukla
2025-10-09 11:16 ` [v1 10/12] net/enetc: Add link speed and status support vanshika.shukla
2025-10-09 11:16 ` [v1 11/12] net/enetc: Add link status notification support vanshika.shukla
2025-10-09 11:16 ` [v1 12/12] net/enetc: Add MAC and VLAN filter support vanshika.shukla
2025-10-15 22:10 ` [v1 00/12] ENETC4 PMD support Stephen Hemminger
2025-10-17 9:19 ` [v2 " vanshika.shukla
2025-10-17 9:19 ` [v2 01/12] net/enetc: Add initial ENETC4 PMD driver support vanshika.shukla
2025-10-17 9:19 ` [v2 02/12] net/enetc: Add RX and TX queue APIs for ENETC4 PMD vanshika.shukla
2025-10-17 9:19 ` [v2 03/12] net/enetc: Optimize ENETC4 data path vanshika.shukla
2025-10-17 9:19 ` [v2 04/12] net/enetc: Add TX checksum offload and RX checksum validation vanshika.shukla
2025-10-17 9:19 ` [v2 05/12] net/enetc: Add basic statistics vanshika.shukla
2025-10-17 9:19 ` [v2 06/12] net/enetc: Add packet type parsing support vanshika.shukla
2025-10-17 9:19 ` [v2 07/12] net/enetc: Add VF to PF messaging support and primary MAC setup vanshika.shukla
2025-10-17 9:19 ` [v2 08/12] net/enetc: Add multicast and promiscuous mode support vanshika.shukla
2025-10-17 9:19 ` [v2 09/12] net/enetc: Add link speed and status support vanshika.shukla
2025-10-17 9:19 ` [v2 10/12] net/enetc: Add link status notification support vanshika.shukla
2025-10-17 9:19 ` [v2 11/12] net/enetc: Add MAC and VLAN filter support vanshika.shukla
2025-10-17 9:19 ` [v2 12/12] net/enetc: Add support for deferred queue and queue info callbacks vanshika.shukla
2025-10-22 16:34 ` [v2 00/12] ENETC4 PMD support Stephen Hemminger
-- strict thread matches above, loose matches on Subject: below --
2024-10-18 7:26 [v1 " vanshika.shukla
2024-10-18 7:26 ` [v1 01/12] net/enetc: Add initial ENETC4 PMD driver support vanshika.shukla
2024-10-20 23:39 ` Stephen Hemminger
2024-10-20 23:52 ` Stephen Hemminger
2024-12-02 22:26 ` Stephen Hemminger
2024-12-02 22:30 ` Stephen Hemminger
2024-12-03 22:57 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251015143421.2da77870@hermes.local \
--to=stephen@networkplumber.org \
--cc=anatoly.burakov@intel.com \
--cc=apeksha.gupta@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=g.singh@nxp.com \
--cc=sachin.saxena@nxp.com \
--cc=thomas@monjalon.net \
--cc=vanshika.shukla@nxp.com \
--cc=wathsala.vithanage@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.