From: "Piotr Piórkowski" <piotr.piorkowski@intel.com>
To: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: <intel-xe@lists.freedesktop.org>
Subject: Re: [PATCH 4/4] drm/xe/pf: Allow to restore auto-provisioning mode
Date: Thu, 16 Oct 2025 17:46:44 +0200 [thread overview]
Message-ID: <20251016154644.4ej2xtqscxhd57th@intel.com> (raw)
In-Reply-To: <20251015091211.592-5-michal.wajdeczko@intel.com>
Michal Wajdeczko <michal.wajdeczko@intel.com> wrote on śro [2025-paź-15 11:12:09 +0200]:
> After doing tweaks to the VFs provisioning we may want to restore
> back the auto-provisioning mode. Allow that unless VFs are still
> enabled. This can be also used to release all VFs resources.
>
> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
> ---
> drivers/gpu/drm/xe/xe_sriov_pf_debugfs.c | 63 ++++++++++++++++++++++
> drivers/gpu/drm/xe/xe_sriov_pf_helpers.h | 11 ++++
> drivers/gpu/drm/xe/xe_sriov_pf_provision.c | 18 +++++++
> 3 files changed, 92 insertions(+)
>
> diff --git a/drivers/gpu/drm/xe/xe_sriov_pf_debugfs.c b/drivers/gpu/drm/xe/xe_sriov_pf_debugfs.c
> index 97636ed86fb8..a81aa05c5532 100644
> --- a/drivers/gpu/drm/xe/xe_sriov_pf_debugfs.c
> +++ b/drivers/gpu/drm/xe/xe_sriov_pf_debugfs.c
> @@ -13,6 +13,7 @@
> #include "xe_sriov_pf_control.h"
> #include "xe_sriov_pf_debugfs.h"
> #include "xe_sriov_pf_helpers.h"
> +#include "xe_sriov_pf_provision.h"
> #include "xe_sriov_pf_service.h"
> #include "xe_sriov_printk.h"
> #include "xe_tile_sriov_pf_debugfs.h"
> @@ -43,6 +44,66 @@ static unsigned int extract_vfid(struct dentry *d)
> return p == extract_xe(d) ? PFID : (uintptr_t)p;
> }
>
> +/*
> + * /sys/kernel/debug/dri/BDF/
> + * ├── sriov
> + * │ ├── restore_auto_provisioning
> + * │ :
> + * │ ├── pf/
> + * │ ├── vf1
> + * │ │ ├── ...
> + */
> +
> +static ssize_t from_file_write_to_xe_call(struct file *file, const char __user *userbuf,
> + size_t count, loff_t *ppos,
> + int (*call)(struct xe_device *))
> +{
> + struct dentry *dent = file_dentry(file);
> + struct xe_device *xe = extract_xe(dent);
> + bool yes;
> + int ret;
> +
> + if (*ppos)
> + return -EINVAL;
> + ret = kstrtobool_from_user(userbuf, count, &yes);
> + if (ret < 0)
> + return ret;
> + if (yes) {
> + xe_pm_runtime_get(xe);
> + ret = call(xe);
> + xe_pm_runtime_put(xe);
> + }
> + if (ret < 0)
> + return ret;
> + return count;
> +}
> +
> +#define DEFINE_SRIOV_ATTRIBUTE(OP) \
> +static int OP##_show(struct seq_file *s, void *unused) \
> +{ \
> + return 0; \
> +} \
> +static ssize_t OP##_write(struct file *file, const char __user *userbuf, \
> + size_t count, loff_t *ppos) \
> +{ \
> + return from_file_write_to_xe_call(file, userbuf, count, ppos, \
> + xe_sriov_pf_##OP); \
> +} \
> +DEFINE_SHOW_STORE_ATTRIBUTE(OP)
> +
> +static inline int xe_sriov_pf_restore_auto_provisioning(struct xe_device *xe)
> +{
> + return xe_sriov_pf_provision_set_mode(xe, XE_SRIOV_PROVISIONING_MODE_AUTO);
> +}
> +
> +DEFINE_SRIOV_ATTRIBUTE(restore_auto_provisioning);
> +
> +static void pf_populate_root(struct xe_device *xe, struct dentry *dent)
> +{
> + debugfs_create_file("restore_auto_provisioning", 0200, dent, xe,
> + &restore_auto_provisioning_fops);
> +}
> +
> static int simple_show(struct seq_file *m, void *data)
> {
> struct drm_printer p = drm_seq_file_printer(m);
> @@ -167,6 +228,8 @@ void xe_sriov_pf_debugfs_register(struct xe_device *xe, struct dentry *root)
> return;
> dent->d_inode->i_private = xe;
>
> + pf_populate_root(xe, dent);
> +
> /*
> * /sys/kernel/debug/dri/BDF/
> * ├── sriov # d_inode->i_private = (xe_device*)
> diff --git a/drivers/gpu/drm/xe/xe_sriov_pf_helpers.h b/drivers/gpu/drm/xe/xe_sriov_pf_helpers.h
> index dd1df950b021..4a4340fb633a 100644
> --- a/drivers/gpu/drm/xe/xe_sriov_pf_helpers.h
> +++ b/drivers/gpu/drm/xe/xe_sriov_pf_helpers.h
> @@ -37,6 +37,17 @@ static inline int xe_sriov_pf_get_totalvfs(struct xe_device *xe)
> return xe->sriov.pf.driver_max_vfs;
> }
>
> +/**
> + * xe_sriov_pf_num_vfs() - Number of enabled VFs on the PF.
> + * @xe: the PF &xe_device
> + *
> + * Return: Number of enabled VFs on the PF.
> + */
> +static inline unsigned int xe_sriov_pf_num_vfs(const struct xe_device *xe)
> +{
> + return pci_num_vf(to_pci_dev(xe->drm.dev));
> +}
> +
> static inline struct mutex *xe_sriov_pf_master_mutex(struct xe_device *xe)
> {
> xe_assert(xe, IS_SRIOV_PF(xe));
> diff --git a/drivers/gpu/drm/xe/xe_sriov_pf_provision.c b/drivers/gpu/drm/xe/xe_sriov_pf_provision.c
> index 7e74175db972..32c281c1dc5d 100644
> --- a/drivers/gpu/drm/xe/xe_sriov_pf_provision.c
> +++ b/drivers/gpu/drm/xe/xe_sriov_pf_provision.c
> @@ -70,6 +70,11 @@ static void pf_unprovision_vfs(struct xe_device *xe, unsigned int num_vfs)
> xe_gt_sriov_pf_config_release(gt, n, true);
> }
>
> +static void pf_unprovision_all_vfs(struct xe_device *xe)
> +{
> + pf_unprovision_vfs(xe, xe_sriov_pf_get_totalvfs(xe));
> +}
> +
> /**
> * xe_sriov_pf_provision_vfs() - Provision VFs in auto-mode.
> * @xe: the PF &xe_device
> @@ -117,6 +122,10 @@ int xe_sriov_pf_unprovision_vfs(struct xe_device *xe, unsigned int num_vfs)
> * When changing from AUTO to CUSTOM mode, any already allocated VFs resources
> * will remain allocated and will not be released upon VFs disabling.
> *
> + * When changing back to AUTO mode, if VFs are not enabled, already allocated
> + * VFs resources will be immediately released. If VFs are still enabled, such
> + * mode change is rejected.
> + *
> * This function can only be called on PF.
> *
> * Return: 0 on success or a negative error code on failure.
> @@ -128,6 +137,15 @@ int xe_sriov_pf_provision_set_mode(struct xe_device *xe, enum xe_sriov_provision
> if (mode == xe->sriov.pf.provision.mode)
> return 0;
>
> + if (mode == XE_SRIOV_PROVISIONING_MODE_AUTO) {
> + if (xe_sriov_pf_num_vfs(xe)) {
> + xe_sriov_dbg(xe, "can't restore %s: VFs must be disabled!\n",
> + mode_to_string(mode));
NIT: I would consider a higher level of logging here.
> + return -EBUSY;
> + }
> + pf_unprovision_all_vfs(xe);
> + }
> +
> xe_sriov_dbg(xe, "mode %s changed to %s by %ps\n",
> mode_to_string(xe->sriov.pf.provision.mode),
> mode_to_string(mode), __builtin_return_address(0));
LGTM:
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
> --
> 2.47.1
>
--
next prev parent reply other threads:[~2025-10-16 15:47 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-15 9:12 [PATCH 0/4] PF: Update auto-provisioning Michal Wajdeczko
2025-10-15 9:12 ` [PATCH 1/4] drm/xe/pf: Promote VFs provisioning helpers Michal Wajdeczko
2025-10-15 13:00 ` Piotr Piórkowski
2025-10-16 11:33 ` Michal Wajdeczko
2025-10-15 9:12 ` [PATCH 2/4] drm/xe/pf: Automatically provision VFs only in auto-mode Michal Wajdeczko
2025-10-15 16:30 ` Piotr Piórkowski
2025-10-15 9:12 ` [PATCH 3/4] drm/xe/pf: Disable auto-provisioning if changed using debugfs Michal Wajdeczko
2025-10-16 15:26 ` Piotr Piórkowski
2025-10-15 9:12 ` [PATCH 4/4] drm/xe/pf: Allow to restore auto-provisioning mode Michal Wajdeczko
2025-10-16 15:46 ` Piotr Piórkowski [this message]
2025-10-15 12:10 ` ✗ CI.checkpatch: warning for PF: Update auto-provisioning Patchwork
2025-10-15 12:11 ` ✓ CI.KUnit: success " Patchwork
2025-10-15 13:07 ` ✓ Xe.CI.BAT: " Patchwork
2025-10-15 22:12 ` ✗ Xe.CI.Full: failure " Patchwork
2025-10-16 10:55 ` Michal Wajdeczko
2025-10-20 9:49 ` Bernatowicz, Marcin
2025-10-20 11:08 ` Bernatowicz, Marcin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251016154644.4ej2xtqscxhd57th@intel.com \
--to=piotr.piorkowski@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=michal.wajdeczko@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.