From: Johan Hovold <johan@kernel.org>
To: Johan Hovold <johan@kernel.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: [PATCH 2/8] USB: serial: kobil_sct: fix TIOCMBIS and TIOCMBIC
Date: Wed, 22 Oct 2025 17:26:34 +0200 [thread overview]
Message-ID: <20251022152640.24212-3-johan@kernel.org> (raw)
In-Reply-To: <20251022152640.24212-1-johan@kernel.org>
Asserting or deasserting a modem control line using TIOCMBIS or TIOCMBIC
should not deassert any lines that are not in the mask.
Fix this long-standing issue dating back to 2003 when the support for
these ioctls was added with the introduction of the tiocmset() callback.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/serial/kobil_sct.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 464433be2034..96ea571c436a 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -418,7 +418,7 @@ static int kobil_tiocmset(struct tty_struct *tty,
struct usb_serial_port *port = tty->driver_data;
struct device *dev = &port->dev;
struct kobil_private *priv;
- int result;
+ int result = 0;
int dtr = 0;
int rts = 0;
@@ -435,12 +435,12 @@ static int kobil_tiocmset(struct tty_struct *tty,
if (set & TIOCM_DTR)
dtr = 1;
if (clear & TIOCM_RTS)
- rts = 0;
+ rts = 1;
if (clear & TIOCM_DTR)
- dtr = 0;
+ dtr = 1;
- if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) {
- if (dtr != 0)
+ if (dtr && priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) {
+ if (set & TIOCM_DTR)
dev_dbg(dev, "%s - Setting DTR\n", __func__);
else
dev_dbg(dev, "%s - Clearing DTR\n", __func__);
@@ -448,13 +448,13 @@ static int kobil_tiocmset(struct tty_struct *tty,
usb_sndctrlpipe(port->serial->dev, 0),
SUSBCRequest_SetStatusLinesOrQueues,
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
- ((dtr != 0) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR),
+ ((set & TIOCM_DTR) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR),
0,
NULL,
0,
KOBIL_TIMEOUT);
- } else {
- if (rts != 0)
+ } else if (rts) {
+ if (set & TIOCM_RTS)
dev_dbg(dev, "%s - Setting RTS\n", __func__);
else
dev_dbg(dev, "%s - Clearing RTS\n", __func__);
@@ -462,7 +462,7 @@ static int kobil_tiocmset(struct tty_struct *tty,
usb_sndctrlpipe(port->serial->dev, 0),
SUSBCRequest_SetStatusLinesOrQueues,
USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
- ((rts != 0) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS),
+ ((set & TIOCM_RTS) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS),
0,
NULL,
0,
--
2.49.1
next prev parent reply other threads:[~2025-10-22 15:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-22 15:26 [PATCH 0/8] USB: serial: fix TIOCMBIS and TIOCMBIC Johan Hovold
2025-10-22 15:26 ` [PATCH 1/8] USB: serial: belkin_sa: " Johan Hovold
2025-10-22 15:26 ` Johan Hovold [this message]
2025-10-22 15:26 ` [PATCH 3/8] USB: serial: belkin_sa: clean up tiocmset() Johan Hovold
2025-10-22 15:26 ` [PATCH 4/8] USB: serial: kobil_sct: " Johan Hovold
2025-10-22 15:26 ` [PATCH 5/8] USB: serial: kobil_sct: clean up device type checks Johan Hovold
2025-10-22 15:26 ` [PATCH 6/8] USB: serial: kobil_sct: add control request helpers Johan Hovold
2025-10-22 15:26 ` [PATCH 7/8] USB: serial: kobil_sct: clean up set_termios() Johan Hovold
2025-10-22 15:26 ` [PATCH 8/8] USB: serial: kobil_sct: drop unnecessary initialisations Johan Hovold
2025-10-22 17:14 ` [PATCH 0/8] USB: serial: fix TIOCMBIS and TIOCMBIC Greg KH
2025-10-27 8:24 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251022152640.24212-3-johan@kernel.org \
--to=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.