All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antheas Kapenekakis <lkml@antheas.dev>
To: Shenghao Ding <shenghao-ding@ti.com>, Baojun Xu <baojun.xu@ti.com>
Cc: Takashi Iwai <tiwai@suse.com>,
	linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	Antheas Kapenekakis <lkml@antheas.dev>,
	stable@vger.kernel.org
Subject: [PATCH v1 1/2] ALSA: hda/tas2781: fix speaker id retrieval for multiple probes
Date: Sun, 26 Oct 2025 20:16:34 +0100	[thread overview]
Message-ID: <20251026191635.2447593-1-lkml@antheas.dev> (raw)

Currently, on ASUS projects, the TAS2781 codec attaches the speaker GPIO
to the first tasdevice_priv instance using devm. This causes
tas2781_read_acpi to fail on subsequent probes since the GPIO is already
managed by the first device. This causes a failure on Xbox Ally X,
because it has two amplifiers, and prevents us from quirking both the
Xbox Ally and Xbox Ally X in the realtek codec driver.

It is unnecessary to attach the GPIO to a device as it is static.
Therefore, instead of attaching it and then reading it when loading the
firmware, read its value directly in tas2781_read_acpi and store it in
the private data structure. Then, make reading the value non-fatal so
that ASUS projects that miss a speaker pin can still work, perhaps using
fallback firmware.

Fixes: 4e7035a75da9 ("ALSA: hda/tas2781: Add speaker id check for ASUS projects")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
---
 include/sound/tas2781.h                       |  2 +-
 .../hda/codecs/side-codecs/tas2781_hda_i2c.c  | 44 +++++++++++--------
 2 files changed, 26 insertions(+), 20 deletions(-)

diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h
index 0fbcdb15c74b..29d15ba65f04 100644
--- a/include/sound/tas2781.h
+++ b/include/sound/tas2781.h
@@ -197,7 +197,6 @@ struct tasdevice_priv {
 	struct acoustic_data acou_data;
 #endif
 	struct tasdevice_fw *fmw;
-	struct gpio_desc *speaker_id;
 	struct gpio_desc *reset;
 	struct mutex codec_lock;
 	struct regmap *regmap;
@@ -215,6 +214,7 @@ struct tasdevice_priv {
 	unsigned int magic_num;
 	unsigned int chip_id;
 	unsigned int sysclk;
+	int speaker_id;
 
 	int irq;
 	int cur_prog;
diff --git a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
index 0357401a6023..c8619995b1d7 100644
--- a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
+++ b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
@@ -87,6 +87,7 @@ static const struct acpi_gpio_mapping tas2781_speaker_id_gpios[] = {
 
 static int tas2781_read_acpi(struct tasdevice_priv *p, const char *hid)
 {
+	struct gpio_desc *speaker_id;
 	struct acpi_device *adev;
 	struct device *physdev;
 	LIST_HEAD(resources);
@@ -119,19 +120,31 @@ static int tas2781_read_acpi(struct tasdevice_priv *p, const char *hid)
 	/* Speaker id was needed for ASUS projects. */
 	ret = kstrtou32(sub, 16, &subid);
 	if (!ret && upper_16_bits(subid) == PCI_VENDOR_ID_ASUSTEK) {
-		ret = devm_acpi_dev_add_driver_gpios(p->dev,
-			tas2781_speaker_id_gpios);
-		if (ret < 0)
+		ret = acpi_dev_add_driver_gpios(adev, tas2781_speaker_id_gpios);
+		if (ret < 0) {
 			dev_err(p->dev, "Failed to add driver gpio %d.\n",
 				ret);
-		p->speaker_id = devm_gpiod_get(p->dev, "speakerid", GPIOD_IN);
-		if (IS_ERR(p->speaker_id)) {
-			dev_err(p->dev, "Failed to get Speaker id.\n");
-			ret = PTR_ERR(p->speaker_id);
-			goto err;
+			p->speaker_id = -1;
+			goto end_2563;
+		}
+
+		speaker_id = fwnode_gpiod_get_index(acpi_fwnode_handle(adev),
+			"speakerid", 0, GPIOD_IN, NULL);
+		if (!IS_ERR(speaker_id)) {
+			p->speaker_id = gpiod_get_value_cansleep(speaker_id);
+			dev_dbg(p->dev, "Got speaker id gpio from ACPI: %d.\n",
+				p->speaker_id);
+			gpiod_put(speaker_id);
+		} else {
+			p->speaker_id = -1;
+			ret = PTR_ERR(speaker_id);
+			dev_err(p->dev, "Get speaker id gpio failed %d.\n",
+				ret);
 		}
+
+		acpi_dev_remove_driver_gpios(adev);
 	} else {
-		p->speaker_id = NULL;
+		p->speaker_id = -1;
 	}
 
 end_2563:
@@ -432,23 +445,16 @@ static void tasdevice_dspfw_init(void *context)
 	struct tas2781_hda *tas_hda = dev_get_drvdata(tas_priv->dev);
 	struct tas2781_hda_i2c_priv *hda_priv = tas_hda->hda_priv;
 	struct hda_codec *codec = tas_priv->codec;
-	int ret, spk_id;
+	int ret;
 
 	tasdevice_dsp_remove(tas_priv);
 	tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING;
-	if (tas_priv->speaker_id != NULL) {
-		// Speaker id need to be checked for ASUS only.
-		spk_id = gpiod_get_value(tas_priv->speaker_id);
-		if (spk_id < 0) {
-			// Speaker id is not valid, use default.
-			dev_dbg(tas_priv->dev, "Wrong spk_id = %d\n", spk_id);
-			spk_id = 0;
-		}
+	if (tas_priv->speaker_id >= 0) {
 		snprintf(tas_priv->coef_binaryname,
 			  sizeof(tas_priv->coef_binaryname),
 			  "TAS2XXX%04X%d.bin",
 			  lower_16_bits(codec->core.subsystem_id),
-			  spk_id);
+			  tas_priv->speaker_id);
 	} else {
 		snprintf(tas_priv->coef_binaryname,
 			  sizeof(tas_priv->coef_binaryname),

base-commit: 211ddde0823f1442e4ad052a2f30f050145ccada
-- 
2.51.1



             reply	other threads:[~2025-10-26 19:16 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-26 19:16 Antheas Kapenekakis [this message]
2025-10-26 19:16 ` [PATCH v1 2/2] ALSA: hda/realtek: Add match for ASUS Xbox Ally projects Antheas Kapenekakis
2025-10-26 19:19   ` Antheas Kapenekakis
2025-10-27  6:01     ` Matthew Schwartz
2025-10-27  8:23       ` Antheas Kapenekakis
2025-10-27  8:34         ` Antheas Kapenekakis
2025-10-27 19:57         ` Matthew Schwartz
2025-10-28 17:27           ` Antheas Kapenekakis
2025-11-02 17:33             ` Antheas Kapenekakis
2025-11-09  9:19               ` Antheas Kapenekakis
2025-11-17 16:14                 ` Takashi Iwai
2025-11-18  2:31 ` [EXTERNAL] [PATCH v1 1/2] ALSA: hda/tas2781: fix speaker id retrieval for multiple probes Xu, Baojun
2025-11-18  6:54   ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251026191635.2447593-1-lkml@antheas.dev \
    --to=lkml@antheas.dev \
    --cc=baojun.xu@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=shenghao-ding@ti.com \
    --cc=stable@vger.kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.