[PULL 09/11] hw/hppa: PCI devices depend on availability of PCI bus

[deller@kernel.org]

From: Helge Deller <deller@gmx.de>

Only create the PCI serial ports (DIVA) and PCI network cards when there is
actually a PCI bus. The shortly added 715 machine will not have a PCI bus, so
avoid creating further PCI devices.

Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
 hw/hppa/machine.c | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index bec5a86f24..31eeba72b4 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -387,20 +387,22 @@ static void machine_HP_common_init_tail(MachineState *machine, PCIBus *pci_bus,
                         enable_lasi_lan());
     }
 
-    pci_init_nic_devices(pci_bus, mc->default_nic);
-
-    /* BMC board: HP Diva GSP */
-    dev = qdev_new("diva-gsp");
-    if (!object_property_get_bool(OBJECT(dev), "disable", NULL)) {
-        pci_dev = pci_new_multifunction(PCI_DEVFN(2, 0), "diva-gsp");
-        if (!lasi_dev) {
-            /* bind default keyboard/serial to Diva card */
-            qdev_prop_set_chr(DEVICE(pci_dev), "chardev1", serial_hd(0));
-            qdev_prop_set_chr(DEVICE(pci_dev), "chardev2", serial_hd(1));
-            qdev_prop_set_chr(DEVICE(pci_dev), "chardev3", serial_hd(2));
-            qdev_prop_set_chr(DEVICE(pci_dev), "chardev4", serial_hd(3));
+    if (pci_bus) {
+        pci_init_nic_devices(pci_bus, mc->default_nic);
+
+        /* BMC board: HP Diva GSP PCI card */
+        dev = qdev_new("diva-gsp");
+        if (dev && !object_property_get_bool(OBJECT(dev), "disable", NULL)) {
+            pci_dev = pci_new_multifunction(PCI_DEVFN(2, 0), "diva-gsp");
+            if (!lasi_dev) {
+                /* bind default keyboard/serial to Diva card */
+                qdev_prop_set_chr(DEVICE(pci_dev), "chardev1", serial_hd(0));
+                qdev_prop_set_chr(DEVICE(pci_dev), "chardev2", serial_hd(1));
+                qdev_prop_set_chr(DEVICE(pci_dev), "chardev3", serial_hd(2));
+                qdev_prop_set_chr(DEVICE(pci_dev), "chardev4", serial_hd(3));
+            }
+            pci_realize_and_unref(pci_dev, pci_bus, &error_fatal);
         }
-        pci_realize_and_unref(pci_dev, pci_bus, &error_fatal);
     }
 
     /* create USB OHCI controller for USB keyboard & mouse on Astro machines */
-- 
2.51.0