From: Justin Tee <justintee8345@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: jsmart2021@gmail.com, justin.tee@broadcom.com,
Justin Tee <justintee8345@gmail.com>
Subject: [PATCH 06/11] lpfc: Modify kref handling for Fabric Controller ndlps
Date: Mon, 27 Oct 2025 16:54:41 -0700 [thread overview]
Message-ID: <20251027235446.77200-7-justintee8345@gmail.com> (raw)
In-Reply-To: <20251027235446.77200-1-justintee8345@gmail.com>
Currently, there is a kref put in the lpfc_cleanup routine that takes care
of outstanding references on fabric controller ndlps in UNUSED state.
While typically there is a state change from UNUSED -> REGLOGIN when the
ndlp successfully logs into the fabric, there may be cases when FLOGI is
unsuccessful and the ndlp will remain in UNUSED state without a registered
rpi, yet the ndlp incorrectly has a kref count of one.
To address this, handling of Fabric Controller ndlps are moved into the
routines: lpfc_issue_els_scr, lpfc_issue_els_rdf, lpfc_cmpl_els_disc_cmd.
In both lpfc_issue_els_scr and lpfc_issue_els_rdf, if there does not exist
a previously created fabric controller ndlp, an ndlp will be created.
Otherwise, we can reuse the pre-existing ndlp object.
In lpfc_cmpl_els_disc_cmd, if the SCR or RDF are not successfully issued,
the initial reference on the ndlp that is not registered with upper layers
will be decremented with a kref_put.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
---
drivers/scsi/lpfc/lpfc_els.c | 97 ++++++++++++++++++++++++-----------
drivers/scsi/lpfc/lpfc_init.c | 6 ---
2 files changed, 67 insertions(+), 36 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b6ce7e0f8a9b..00cfd4ac4ccd 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -3390,11 +3390,21 @@ lpfc_cmpl_els_disc_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
lpfc_cmpl_els_edc(phba, cmdiocb, rspiocb);
return;
}
+
if (ulp_status) {
/* ELS discovery cmd completes with error */
lpfc_printf_vlog(vport, KERN_WARNING, LOG_ELS | LOG_CGN_MGMT,
"4203 ELS cmd x%x error: x%x x%X\n", cmd,
ulp_status, ulp_word4);
+
+ /* In the case where the ELS cmd completes with an error and
+ * the node does not have RPI registered, the node is
+ * outstanding and should put its initial reference.
+ */
+ if ((cmd == ELS_CMD_SCR || cmd == ELS_CMD_RDF) &&
+ !(ndlp->fc4_xpt_flags & SCSI_XPT_REGD) &&
+ !test_and_set_bit(NLP_DROPPED, &ndlp->nlp_flag))
+ lpfc_nlp_put(ndlp);
goto out;
}
@@ -3463,6 +3473,7 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint8_t retry)
uint8_t *pcmd;
uint16_t cmdsize;
struct lpfc_nodelist *ndlp;
+ bool node_created = false;
cmdsize = (sizeof(uint32_t) + sizeof(SCR));
@@ -3472,21 +3483,21 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint8_t retry)
if (!ndlp)
return 1;
lpfc_enqueue_node(vport, ndlp);
+ node_created = true;
}
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
ndlp->nlp_DID, ELS_CMD_SCR);
if (!elsiocb)
- return 1;
+ goto out_node_created;
if (phba->sli_rev == LPFC_SLI_REV4) {
rc = lpfc_reg_fab_ctrl_node(vport, ndlp);
if (rc) {
- lpfc_els_free_iocb(phba, elsiocb);
lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE,
"0937 %s: Failed to reg fc node, rc %d\n",
__func__, rc);
- return 1;
+ goto out_free_iocb;
}
}
pcmd = (uint8_t *)elsiocb->cmd_dmabuf->virt;
@@ -3505,23 +3516,27 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint8_t retry)
phba->fc_stat.elsXmitSCR++;
elsiocb->cmd_cmpl = lpfc_cmpl_els_disc_cmd;
elsiocb->ndlp = lpfc_nlp_get(ndlp);
- if (!elsiocb->ndlp) {
- lpfc_els_free_iocb(phba, elsiocb);
- return 1;
- }
+ if (!elsiocb->ndlp)
+ goto out_free_iocb;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
"Issue SCR: did:x%x refcnt %d",
ndlp->nlp_DID, kref_read(&ndlp->kref), 0);
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
- if (rc == IOCB_ERROR) {
- lpfc_els_free_iocb(phba, elsiocb);
- lpfc_nlp_put(ndlp);
- return 1;
- }
+ if (rc == IOCB_ERROR)
+ goto out_iocb_error;
return 0;
+
+out_iocb_error:
+ lpfc_nlp_put(ndlp);
+out_free_iocb:
+ lpfc_els_free_iocb(phba, elsiocb);
+out_node_created:
+ if (node_created)
+ lpfc_nlp_put(ndlp);
+ return 1;
}
/**
@@ -3734,7 +3749,12 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
*
* Return code
* 0 - Successfully issued rdf command
- * 1 - Failed to issue rdf command
+ * < 0 - Failed to issue rdf command
+ * -EACCES - RDF not required for NPIV_PORT
+ * -ENODEV - No fabric controller device available
+ * -ENOMEM - No available memory
+ * -EIO - The mailbox failed to complete successfully.
+ *
**/
int
lpfc_issue_els_rdf(struct lpfc_vport *vport, uint8_t retry)
@@ -3745,25 +3765,30 @@ lpfc_issue_els_rdf(struct lpfc_vport *vport, uint8_t retry)
struct lpfc_nodelist *ndlp;
uint16_t cmdsize;
int rc;
+ bool node_created = false;
+ int err;
cmdsize = sizeof(*prdf);
+ /* RDF ELS is not required on an NPIV VN_Port. */
+ if (vport->port_type == LPFC_NPIV_PORT)
+ return -EACCES;
+
ndlp = lpfc_findnode_did(vport, Fabric_Cntl_DID);
if (!ndlp) {
ndlp = lpfc_nlp_init(vport, Fabric_Cntl_DID);
if (!ndlp)
return -ENODEV;
lpfc_enqueue_node(vport, ndlp);
+ node_created = true;
}
- /* RDF ELS is not required on an NPIV VN_Port. */
- if (vport->port_type == LPFC_NPIV_PORT)
- return -EACCES;
-
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
ndlp->nlp_DID, ELS_CMD_RDF);
- if (!elsiocb)
- return -ENOMEM;
+ if (!elsiocb) {
+ err = -ENOMEM;
+ goto out_node_created;
+ }
/* Configure the payload for the supported FPIN events. */
prdf = (struct lpfc_els_rdf_req *)elsiocb->cmd_dmabuf->virt;
@@ -3789,8 +3814,8 @@ lpfc_issue_els_rdf(struct lpfc_vport *vport, uint8_t retry)
elsiocb->cmd_cmpl = lpfc_cmpl_els_disc_cmd;
elsiocb->ndlp = lpfc_nlp_get(ndlp);
if (!elsiocb->ndlp) {
- lpfc_els_free_iocb(phba, elsiocb);
- return -EIO;
+ err = -EIO;
+ goto out_free_iocb;
}
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
@@ -3799,11 +3824,19 @@ lpfc_issue_els_rdf(struct lpfc_vport *vport, uint8_t retry)
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
- lpfc_els_free_iocb(phba, elsiocb);
- lpfc_nlp_put(ndlp);
- return -EIO;
+ err = -EIO;
+ goto out_iocb_error;
}
return 0;
+
+out_iocb_error:
+ lpfc_nlp_put(ndlp);
+out_free_iocb:
+ lpfc_els_free_iocb(phba, elsiocb);
+out_node_created:
+ if (node_created)
+ lpfc_nlp_put(ndlp);
+ return err;
}
/**
@@ -3824,19 +3857,23 @@ static int
lpfc_els_rcv_rdf(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
struct lpfc_nodelist *ndlp)
{
+ int rc;
+
+ rc = lpfc_els_rsp_acc(vport, ELS_CMD_RDF, cmdiocb, ndlp, NULL);
/* Send LS_ACC */
- if (lpfc_els_rsp_acc(vport, ELS_CMD_RDF, cmdiocb, ndlp, NULL)) {
+ if (rc) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS | LOG_CGN_MGMT,
- "1623 Failed to RDF_ACC from x%x for x%x\n",
- ndlp->nlp_DID, vport->fc_myDID);
+ "1623 Failed to RDF_ACC from x%x for x%x Data: %d\n",
+ ndlp->nlp_DID, vport->fc_myDID, rc);
return -EIO;
}
+ rc = lpfc_issue_els_rdf(vport, 0);
/* Issue new RDF for reregistering */
- if (lpfc_issue_els_rdf(vport, 0)) {
+ if (rc) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS | LOG_CGN_MGMT,
- "2623 Failed to re register RDF for x%x\n",
- vport->fc_myDID);
+ "2623 Failed to re register RDF for x%x Data: %d\n",
+ vport->fc_myDID, rc);
return -EIO;
}
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 34386b7c0b48..a9c6dbe3b465 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3057,12 +3057,6 @@ lpfc_cleanup(struct lpfc_vport *vport)
lpfc_vmid_vport_cleanup(vport);
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
- if (ndlp->nlp_DID == Fabric_Cntl_DID &&
- ndlp->nlp_state == NLP_STE_UNUSED_NODE) {
- lpfc_nlp_put(ndlp);
- continue;
- }
-
/* Fabric Ports not in UNMAPPED state are cleaned up in the
* DEVICE_RM event.
*/
--
2.38.0
next prev parent reply other threads:[~2025-10-27 23:24 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-27 23:54 [PATCH 00/11] Update lpfc to revision 14.4.0.12 Justin Tee
2025-10-27 23:54 ` [PATCH 01/11] lpfc: Update various NPIV diagnostic log messaging Justin Tee
2025-10-27 23:54 ` [PATCH 02/11] lpfc: Revise discovery related function headers and comments Justin Tee
2025-10-27 23:54 ` [PATCH 03/11] lpfc: Remove redundant NULL ptr assignment in lpfc_els_free_iocb Justin Tee
2025-10-27 23:54 ` [PATCH 04/11] lpfc: Ensure unregistration of rpis for received PLOGIs Justin Tee
2025-10-27 23:54 ` [PATCH 05/11] lpfc: Fix leaked ndlp krefs when in point-to-point topology Justin Tee
2025-10-27 23:54 ` Justin Tee [this message]
2025-10-27 23:54 ` [PATCH 07/11] lpfc: Fix reusing an ndlp that is marked NLP_DROPPED during FLOGI Justin Tee
2025-10-27 23:54 ` [PATCH 08/11] lpfc: Allow support for BB credit recovery in point-to-point topology Justin Tee
2025-10-27 23:54 ` [PATCH 09/11] lpfc: Add capability to register Platform Name ID to fabric Justin Tee
2025-10-28 7:34 ` Krzysztof Kozlowski
2025-10-28 23:16 ` Justin Tee
2025-10-29 5:20 ` Krzysztof Kozlowski
2025-10-29 18:14 ` Justin Tee
2025-10-30 5:29 ` Krzysztof Kozlowski
2025-10-30 17:34 ` Justin Tee
2025-10-27 23:54 ` [PATCH 10/11] lpfc: Update lpfc version to 14.4.0.12 Justin Tee
2025-10-28 7:33 ` Krzysztof Kozlowski
2025-10-28 23:13 ` Justin Tee
2025-10-27 23:54 ` [PATCH 11/11] lpfc: Copyright updates for 14.4.0.12 patches Justin Tee
2025-10-28 7:32 ` Krzysztof Kozlowski
2025-10-28 23:13 ` Justin Tee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251027235446.77200-7-justintee8345@gmail.com \
--to=justintee8345@gmail.com \
--cc=jsmart2021@gmail.com \
--cc=justin.tee@broadcom.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.