[PATCH v3 1/2] PCI: j721e: Use devm_clk_get_optional_enabled() to get the clock

[Anand Moon <linux.amoon@gmail.com>]

Use devm_clk_get_optional_enabled() helper instead of calling
devm_clk_get_optional() and then clk_prepare_enable(). It simplifies
the clk_prepare_enable() and clk_disable_unprepare() with proper error
handling and makes the code more compact.
The result of devm_clk_get_optional_enabled() is now assigned directly
to pcie->refclk. This removes a superfluous local clk variable,
improving code readability and compactness. The functionality
remains unchanged, but the code is now more streamlined.

Cc: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v4: Add Rb Siddharth
---
 drivers/pci/controller/cadence/pci-j721e.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 5bc5ab20aa6d..a88b2e52fd78 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -479,7 +479,6 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	struct cdns_pcie_ep *ep = NULL;
 	struct gpio_desc *gpiod;
 	void __iomem *base;
-	struct clk *clk;
 	u32 num_lanes;
 	u32 mode;
 	int ret;
@@ -603,19 +602,13 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			goto err_get_sync;
 		}
 
-		clk = devm_clk_get_optional(dev, "pcie_refclk");
-		if (IS_ERR(clk)) {
-			ret = dev_err_probe(dev, PTR_ERR(clk), "failed to get pcie_refclk\n");
+		pcie->refclk = devm_clk_get_optional_enabled(dev, "pcie_refclk");
+		if (IS_ERR(pcie->refclk)) {
+			ret = dev_err_probe(dev, PTR_ERR(pcie->refclk),
+					    "failed to enable pcie_refclk\n");
 			goto err_pcie_setup;
 		}
 
-		ret = clk_prepare_enable(clk);
-		if (ret) {
-			dev_err_probe(dev, ret, "failed to enable pcie_refclk\n");
-			goto err_pcie_setup;
-		}
-		pcie->refclk = clk;
-
 		/*
 		 * Section 2.2 of the PCI Express Card Electromechanical
 		 * Specification (Revision 5.1) mandates that the deassertion
@@ -629,10 +622,8 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		}
 
 		ret = cdns_pcie_host_setup(rc);
-		if (ret < 0) {
-			clk_disable_unprepare(pcie->refclk);
+		if (ret < 0)
 			goto err_pcie_setup;
-		}
 
 		break;
 	case PCI_MODE_EP:
@@ -679,7 +670,6 @@ static void j721e_pcie_remove(struct platform_device *pdev)
 
 	gpiod_set_value_cansleep(pcie->reset_gpio, 0);
 
-	clk_disable_unprepare(pcie->refclk);
 	cdns_pcie_disable_phy(cdns_pcie);
 	j721e_pcie_disable_link_irq(pcie);
 	pm_runtime_put(dev);
-- 
2.50.1