[PATCH v1 0/5] mpt3sas: Improve device readiness handling and event recovery

[Ranjan Kumar <ranjan.kumar@broadcom.com>]

This patch series enhances the mpt3sas driver’s device bring-up,
readiness detection, and event recovery mechanisms to improve
robustness in environments with slow-responding or transient
SAS/PCIe devices.

The series introduces optional control over issuing TEST UNIT READY
(TUR) commands during device unblocking, configurable retry limits,
and a mechanism to requeue firmware topology events when devices are
temporarily busy. Together, these updates reduce discovery failures
and improve recovery reliability following firmware or link events.

Ranjan Kumar (5):
  mpt3sas: Added no_turs flag to device unblock logic
  mpt3sas: Added issue_scsi_cmd_to_bringup_drive module parameter part-1
  mpt3sas: improve device discovery and readiness handling for slow
    devices part-2
  mpt3sas: Add firmware event requeue support for busy devices
  mpt3sas: Add configurable command retry limit for slow-to-respond
    devices

 drivers/scsi/mpt3sas/mpt3sas_base.c  |    6 +-
 drivers/scsi/mpt3sas/mpt3sas_base.h  |    4 +
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 1459 ++++++++++++++++++++++++--
 3 files changed, 1370 insertions(+), 99 deletions(-)

-- 
2.47.3