From: Rob Herring <robh@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: "Lars-Peter Clausen" <lars@metafoo.de>,
"Nuno Sá" <nuno.sa@analog.com>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Martin Povišer" <povik+lin@cutebit.org>,
"Support Opensource" <support.opensource@diasemi.com>,
"Peter Rosin" <peda@axentia.se>,
"in file" <patches@opensource.cirrus.com>,
"open list:ANALOG DEVICES INC ASOC CODEC DRIVERS"
<linux-sound@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list" <linux-kernel@vger.kernel.org>,
"open list:ARM/APPLE MACHINE SOUND DRIVERS"
<asahi@lists.linux.dev>,
imx@lists.linux.dev
Subject: Re: [PATCH 1/1] ASoC: dt-bindings: consolidate simple audio codec to trivial-codec.yaml
Date: Thu, 30 Oct 2025 14:14:23 -0500 [thread overview]
Message-ID: <20251030191423.GA270802-robh@kernel.org> (raw)
In-Reply-To: <20251029214018.3969034-1-Frank.Li@nxp.com>
On Wed, Oct 29, 2025 at 05:40:15PM -0400, Frank Li wrote:
> Consolidate simple audio codec (one compatible string, one reg and
> '#sound-dai-cells' 0) to a trivial-codec.yaml.
I feel like we're going to be moving things back out when/if supplies
are added. I imagine there's not much alignment there. OTOH, if this is
all older stuff, then that may never happen.
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> .../bindings/sound/adi,max98363.yaml | 60 -----------------
> .../bindings/sound/adi,ssm3515.yaml | 49 --------------
> .../devicetree/bindings/sound/da9055.txt | 22 -------
> .../bindings/sound/nuvoton,nau8540.yaml | 40 ------------
> .../bindings/sound/nuvoton,nau8810.yaml | 45 -------------
> .../bindings/sound/nxp,tfa9879.yaml | 44 -------------
> .../bindings/sound/nxp,uda1342.yaml | 42 ------------
> .../bindings/sound/trivial-codec.yaml | 65 +++++++++++++++++++
> .../devicetree/bindings/sound/wlf,wm8510.yaml | 41 ------------
> .../devicetree/bindings/sound/wlf,wm8523.yaml | 40 ------------
> .../devicetree/bindings/sound/wlf,wm8580.yaml | 42 ------------
> .../devicetree/bindings/sound/wlf,wm8711.yaml | 40 ------------
> .../devicetree/bindings/sound/wlf,wm8728.yaml | 40 ------------
> .../devicetree/bindings/sound/wlf,wm8737.yaml | 40 ------------
> .../devicetree/bindings/sound/wlf,wm8750.yaml | 42 ------------
> .../devicetree/bindings/sound/wlf,wm8753.yaml | 62 ------------------
> .../devicetree/bindings/sound/wlf,wm8776.yaml | 41 ------------
> .../devicetree/bindings/sound/wlf,wm8961.yaml | 43 ------------
> .../devicetree/bindings/sound/wlf,wm8974.yaml | 41 ------------
> .../devicetree/bindings/sound/wm8770.txt | 16 -----
Also, these can be added I think:
cirrus,cs4349
cirrus,cs4341a
cirrus,cs4265
"adi,ssm2602", "adi,ssm2603", "adi,ssm2604"
ti,pcm1792a
ti,pcm1789 (Add reset-gpios)
ti,pcm5102a
dlg,da9055-codec
> 20 files changed, 65 insertions(+), 790 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/adi,max98363.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/da9055.txt
> delete mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/nxp,tfa9879.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/nxp,uda1342.yaml
> create mode 100644 Documentation/devicetree/bindings/sound/trivial-codec.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8510.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8523.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8580.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8711.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8728.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8737.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8750.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8753.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8776.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8961.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8974.yaml
> delete mode 100644 Documentation/devicetree/bindings/sound/wm8770.txt
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/trivial-codec.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/trivial-codec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: collect trivial audio codec
Just 'Trivial Audio Codecs'
> +
> +maintainers:
> + - patches@opensource.cirrus.com
You can put me.
> +
> +allOf:
> + - $ref: dai-common.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - adi,ssm3515
> + - dlg,da9055-codec
> + # Nuvoton Technology Corporation NAU85L40 Audio CODEC
> + - nuvoton,nau8540
> + - nuvoton,nau8810
> + - nuvoton,nau8812
> + - nuvoton,nau8814
> + # NXP TFA9879 class-D audio amplifier
> + - nxp,tfa9879
> + - nxp,uda1342
> + - sdw3019f836300
> + - wlf,wm8510
> + - wlf,wm8523
> + - wlf,wm8580
> + - wlf,wm8581
> + - wlf,wm8711
> + - wlf,wm8728
> + - wlf,wm8737
> + - wlf,wm8750
> + - wlf,wm8753
> + - wlf,wm8770
> + - wlf,wm8776
> + - wlf,wm8961
> + - wlf,wm8974
> + - wlf,wm8987
> +
> + reg:
> + maxItems: 1
> +
> + "#sound-dai-cells":
> + const: 0
> +
> +required:
> + - compatible
> + - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + codec@1a {
> + compatible = "wlf,wm8523";
> + reg = <0x1a>;
> + };
> + };
prev parent reply other threads:[~2025-10-30 19:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-29 21:40 [PATCH 1/1] ASoC: dt-bindings: consolidate simple audio codec to trivial-codec.yaml Frank Li
2025-10-30 11:12 ` Charles Keepax
2025-10-30 19:14 ` Rob Herring [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251030191423.GA270802-robh@kernel.org \
--to=robh@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=asahi@lists.linux.dev \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=patches@opensource.cirrus.com \
--cc=peda@axentia.se \
--cc=povik+lin@cutebit.org \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.