All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Biggers <ebiggers@kernel.org>
To: linux-fscrypt@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org, linux-block@vger.kernel.org,
	Luis Chamberlain <mcgrof@kernel.org>,
	Yongpeng Yang <yangyongpeng@xiaomi.com>,
	stable@vger.kernel.org, Eric Biggers <ebiggers@kernel.org>
Subject: [PATCH v3] fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT
Date: Tue,  4 Nov 2025 16:36:42 -0800	[thread overview]
Message-ID: <20251105003642.42796-1-ebiggers@kernel.org> (raw)

From: Yongpeng Yang <yangyongpeng@xiaomi.com>

When simulating an nvme device on qemu with both logical_block_size and
physical_block_size set to 8 KiB, an error trace appears during
partition table reading at boot time. The issue is caused by
inode->i_blkbits being larger than PAGE_SHIFT, which leads to a left
shift of -1 and triggering a UBSAN warning.

[    2.697306] ------------[ cut here ]------------
[    2.697309] UBSAN: shift-out-of-bounds in fs/crypto/inline_crypt.c:336:37
[    2.697311] shift exponent -1 is negative
[    2.697315] CPU: 3 UID: 0 PID: 274 Comm: (udev-worker) Not tainted 6.18.0-rc2+ #34 PREEMPT(voluntary)
[    2.697317] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    2.697320] Call Trace:
[    2.697324]  <TASK>
[    2.697325]  dump_stack_lvl+0x76/0xa0
[    2.697340]  dump_stack+0x10/0x20
[    2.697342]  __ubsan_handle_shift_out_of_bounds+0x1e3/0x390
[    2.697351]  bh_get_inode_and_lblk_num.cold+0x12/0x94
[    2.697359]  fscrypt_set_bio_crypt_ctx_bh+0x44/0x90
[    2.697365]  submit_bh_wbc+0xb6/0x190
[    2.697370]  block_read_full_folio+0x194/0x270
[    2.697371]  ? __pfx_blkdev_get_block+0x10/0x10
[    2.697375]  ? __pfx_blkdev_read_folio+0x10/0x10
[    2.697377]  blkdev_read_folio+0x18/0x30
[    2.697379]  filemap_read_folio+0x40/0xe0
[    2.697382]  filemap_get_pages+0x5ef/0x7a0
[    2.697385]  ? mmap_region+0x63/0xd0
[    2.697389]  filemap_read+0x11d/0x520
[    2.697392]  blkdev_read_iter+0x7c/0x180
[    2.697393]  vfs_read+0x261/0x390
[    2.697397]  ksys_read+0x71/0xf0
[    2.697398]  __x64_sys_read+0x19/0x30
[    2.697399]  x64_sys_call+0x1e88/0x26a0
[    2.697405]  do_syscall_64+0x80/0x670
[    2.697410]  ? __x64_sys_newfstat+0x15/0x20
[    2.697414]  ? x64_sys_call+0x204a/0x26a0
[    2.697415]  ? do_syscall_64+0xb8/0x670
[    2.697417]  ? irqentry_exit_to_user_mode+0x2e/0x2a0
[    2.697420]  ? irqentry_exit+0x43/0x50
[    2.697421]  ? exc_page_fault+0x90/0x1b0
[    2.697422]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[    2.697425] RIP: 0033:0x75054cba4a06
[    2.697426] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
[    2.697427] RSP: 002b:00007fff973723a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000
[    2.697430] RAX: ffffffffffffffda RBX: 00005ea9a2c02760 RCX: 000075054cba4a06
[    2.697432] RDX: 0000000000002000 RSI: 000075054c190000 RDI: 000000000000001b
[    2.697433] RBP: 00007fff973723c0 R08: 0000000000000000 R09: 0000000000000000
[    2.697434] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[    2.697434] R13: 00005ea9a2c027c0 R14: 00005ea9a2be5608 R15: 00005ea9a2be55f0
[    2.697436]  </TASK>
[    2.697436] ---[ end trace ]---

This situation can happen for block devices because when
CONFIG_TRANSPARENT_HUGEPAGE is enabled, the maximum logical_block_size
is 64 KiB. set_init_blocksize() then sets the block device
inode->i_blkbits to 13, which is within this limit.

File I/O does not trigger this problem because for filesystems that do
not support the FS_LBS feature, sb_set_blocksize() prevents
sb->s_blocksize_bits from being larger than PAGE_SHIFT. During inode
allocation, alloc_inode()->inode_init_always() assigns inode->i_blkbits
from sb->s_blocksize_bits. Currently, only xfs_fs_type has the FS_LBS
flag, and since xfs I/O paths do not reach submit_bh_wbc(), it does not
hit the left-shift underflow issue.

Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Fixes: 47dd67532303 ("block/bdev: lift block size restrictions to 64k")
Cc: stable@vger.kernel.org
[EB: use folio_pos() and consolidate the two shifts by i_blkbits]
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
---

This patch is targeting the fscrypt/for-current tree

 fs/crypto/inline_crypt.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/crypto/inline_crypt.c b/fs/crypto/inline_crypt.c
index 5dee7c498bc8..ed6e926226b5 100644
--- a/fs/crypto/inline_crypt.c
+++ b/fs/crypto/inline_crypt.c
@@ -331,12 +331,11 @@ static bool bh_get_inode_and_lblk_num(const struct buffer_head *bh,
 	if (!mapping)
 		return false;
 	inode = mapping->host;
 
 	*inode_ret = inode;
-	*lblk_num_ret = ((u64)folio->index << (PAGE_SHIFT - inode->i_blkbits)) +
-			(bh_offset(bh) >> inode->i_blkbits);
+	*lblk_num_ret = (folio_pos(folio) + bh_offset(bh)) >> inode->i_blkbits;
 	return true;
 }
 
 /**
  * fscrypt_set_bio_crypt_ctx_bh() - prepare a file contents bio for inline

base-commit: 6146a0f1dfae5d37442a9ddcba012add260bceb0
-- 
2.51.2


                 reply	other threads:[~2025-11-05  0:38 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251105003642.42796-1-ebiggers@kernel.org \
    --to=ebiggers@kernel.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-fscrypt@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=mcgrof@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=yangyongpeng@xiaomi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.