From: Nilay Shroff <nilay@linux.ibm.com>
To: linux-nvme@lists.infradead.org
Cc: hare@suse.de, hch@lst.de, kbusch@kernel.org, sagi@grimberg.me,
dwagner@suse.de, axboe@kernel.dk, kanie@linux.alibaba.com,
gjoyce@ibm.com
Subject: [RFC PATCHv5 6/7] nvme-multipath: add debugfs attribute adaptive_stat
Date: Wed, 5 Nov 2025 16:03:25 +0530 [thread overview]
Message-ID: <20251105103347.86059-7-nilay@linux.ibm.com> (raw)
In-Reply-To: <20251105103347.86059-1-nilay@linux.ibm.com>
This commit introduces a new debugfs attribute, "adaptive_stat", under
both per-path and head debugfs directories (defined under /sys/kernel/
debug/block/). This attribute provides visibility into the internal
state of the adaptive I/O policy to aid in debugging and performance
analysis.
For per-path entries, "adaptive_stat" reports the corresponding path
statistics such as I/O weight, selection count, processed samples, and
ignored samples.
For head entries, it reports per-CPU statistics for each reachable path,
including I/O weight, path score, smoothed (EWMA) latency, selection
count, processed samples, and ignored samples.
These additions enhance observability of the adaptive I/O path selection
behavior and help diagnose imbalance or instability in multipath
performance.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
---
drivers/nvme/host/debugfs.c | 113 ++++++++++++++++++++++++++++++++++++
1 file changed, 113 insertions(+)
diff --git a/drivers/nvme/host/debugfs.c b/drivers/nvme/host/debugfs.c
index e382fa411b13..28de4a8e2333 100644
--- a/drivers/nvme/host/debugfs.c
+++ b/drivers/nvme/host/debugfs.c
@@ -182,6 +182,115 @@ static ssize_t nvme_adp_weight_timeout_store(void *data,
WRITE_ONCE(head->adp_weight_timeout, res * NSEC_PER_SEC);
return count;
}
+
+static void *nvme_mpath_adp_stat_start(struct seq_file *m, loff_t *pos)
+{
+ struct nvme_ns *ns;
+ struct nvme_debugfs_ctx *ctx = m->private;
+ struct nvme_ns_head *head = ctx->data;
+
+ /* Remember srcu index, so we can unlock later. */
+ ctx->srcu_idx = srcu_read_lock(&head->srcu);
+ ns = list_first_or_null_rcu(&head->list, struct nvme_ns, siblings);
+
+ while (*pos && ns) {
+ ns = list_next_or_null_rcu(&head->list, &ns->siblings,
+ struct nvme_ns, siblings);
+ (*pos)--;
+ }
+
+ return ns;
+}
+
+static void *nvme_mpath_adp_stat_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ struct nvme_ns *ns = v;
+ struct nvme_debugfs_ctx *ctx = m->private;
+ struct nvme_ns_head *head = ctx->data;
+
+ (*pos)++;
+
+ return list_next_or_null_rcu(&head->list, &ns->siblings,
+ struct nvme_ns, siblings);
+}
+
+static void nvme_mpath_adp_stat_stop(struct seq_file *m, void *v)
+{
+ struct nvme_debugfs_ctx *ctx = m->private;
+ struct nvme_ns_head *head = ctx->data;
+ int srcu_idx = ctx->srcu_idx;
+
+ srcu_read_unlock(&head->srcu, srcu_idx);
+}
+
+static int nvme_mpath_adp_stat_show(struct seq_file *m, void *v)
+{
+ int i, cpu;
+ struct nvme_path_stat *stat;
+ struct nvme_ns *ns = v;
+
+ seq_printf(m, "%s:\n", ns->disk->disk_name);
+ for_each_online_cpu(cpu) {
+ seq_printf(m, "cpu %d : ", cpu);
+ for (i = 0; i < NVME_NUM_STAT_GROUPS; i++) {
+ stat = &per_cpu_ptr(ns->info, cpu)[i].stat;
+ seq_printf(m, "%u %u %llu %llu %llu %llu %llu ",
+ stat->weight, stat->credit, stat->score,
+ stat->slat_ns, stat->sel,
+ stat->nr_samples, stat->nr_ignored);
+ }
+ seq_putc(m, '\n');
+ }
+ return 0;
+}
+
+static const struct seq_operations nvme_mpath_adp_stat_seq_ops = {
+ .start = nvme_mpath_adp_stat_start,
+ .next = nvme_mpath_adp_stat_next,
+ .stop = nvme_mpath_adp_stat_stop,
+ .show = nvme_mpath_adp_stat_show
+};
+
+static void adp_stat_read_all(struct nvme_ns *ns, struct nvme_path_stat *batch)
+{
+ int i, cpu;
+ u32 ncpu[NVME_NUM_STAT_GROUPS] = {0};
+ struct nvme_path_stat *stat;
+
+ for_each_online_cpu(cpu) {
+ for (i = 0; i < NVME_NUM_STAT_GROUPS; i++) {
+ stat = &per_cpu_ptr(ns->info, cpu)[i].stat;
+ batch[i].sel += stat->sel;
+ batch[i].nr_samples += stat->nr_samples;
+ batch[i].nr_ignored += stat->nr_ignored;
+ batch[i].weight += stat->weight;
+ if (stat->weight)
+ ncpu[i]++;
+ }
+ }
+
+ for (i = 0; i < NVME_NUM_STAT_GROUPS; i++) {
+ if (!ncpu[i])
+ continue;
+ batch[i].weight = DIV_U64_ROUND_CLOSEST(batch[i].weight,
+ ncpu[i]);
+ }
+}
+
+static int nvme_ns_adp_stat_show(void *data, struct seq_file *m)
+{
+ int i;
+ struct nvme_path_stat stat[NVME_NUM_STAT_GROUPS] = {0};
+ struct nvme_ns *ns = (struct nvme_ns *)data;
+
+ adp_stat_read_all(ns, stat);
+ for (i = 0; i < NVME_NUM_STAT_GROUPS; i++) {
+ seq_printf(m, "%u %llu %llu %llu ",
+ stat[i].weight, stat[i].sel,
+ stat[i].nr_samples, stat[i].nr_ignored);
+ }
+ return 0;
+}
#endif
static const struct nvme_debugfs_attr nvme_mpath_debugfs_attrs[] = {
@@ -190,11 +299,15 @@ static const struct nvme_debugfs_attr nvme_mpath_debugfs_attrs[] = {
nvme_adp_ewma_shift_store},
{"adaptive_weight_timeout", 0600, nvme_adp_weight_timeout_show,
nvme_adp_weight_timeout_store},
+ {"adaptive_stat", 0400, .seq_ops = &nvme_mpath_adp_stat_seq_ops},
#endif
{},
};
static const struct nvme_debugfs_attr nvme_ns_debugfs_attrs[] = {
+#ifdef CONFIG_NVME_MULTIPATH
+ {"adaptive_stat", 0400, nvme_ns_adp_stat_show},
+#endif
{},
};
--
2.51.0
next prev parent reply other threads:[~2025-11-05 10:34 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-05 10:33 [RFC PATCHv5 0/7] nvme-multipath: introduce adaptive I/O policy Nilay Shroff
2025-11-05 10:33 ` [RFC PATCHv5 1/7] block: expose blk_stat_{enable,disable}_accounting() to drivers Nilay Shroff
2025-12-12 12:16 ` Sagi Grimberg
2025-11-05 10:33 ` [RFC PATCHv5 2/7] nvme-multipath: add support for adaptive I/O policy Nilay Shroff
2025-12-12 13:04 ` Sagi Grimberg
2025-12-13 7:27 ` Nilay Shroff
2025-12-15 23:36 ` Sagi Grimberg
2025-12-18 11:19 ` Nilay Shroff
2025-12-18 13:46 ` Hannes Reinecke
2025-12-23 14:50 ` Nilay Shroff
2025-12-25 12:45 ` Sagi Grimberg
2025-12-26 18:16 ` Nilay Shroff
2025-12-27 9:33 ` Sagi Grimberg
2025-12-27 9:37 ` Sagi Grimberg
2026-01-04 9:07 ` Nilay Shroff
2026-01-04 21:06 ` Sagi Grimberg
2026-01-06 14:16 ` Nilay Shroff
2026-02-02 13:33 ` Nilay Shroff
2026-01-07 11:15 ` Hannes Reinecke
2025-12-25 12:28 ` Sagi Grimberg
2025-11-05 10:33 ` [RFC PATCHv5 3/7] nvme: add generic debugfs support Nilay Shroff
2025-11-05 10:33 ` [RFC PATCHv5 4/7] nvme-multipath: add debugfs attribute adaptive_ewma_shift Nilay Shroff
2025-11-05 10:33 ` [RFC PATCHv5 5/7] nvme-multipath: add debugfs attribute adaptive_weight_timeout Nilay Shroff
2025-11-05 10:33 ` Nilay Shroff [this message]
2025-11-05 10:33 ` [RFC PATCHv5 7/7] nvme-multipath: add documentation for adaptive I/O policy Nilay Shroff
2025-12-09 13:56 ` [RFC PATCHv5 0/7] nvme-multipath: introduce " Nilay Shroff
2025-12-12 12:08 ` Sagi Grimberg
2025-12-13 8:22 ` Nilay Shroff
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251105103347.86059-7-nilay@linux.ibm.com \
--to=nilay@linux.ibm.com \
--cc=axboe@kernel.dk \
--cc=dwagner@suse.de \
--cc=gjoyce@ibm.com \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=kanie@linux.alibaba.com \
--cc=kbusch@kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=sagi@grimberg.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.