[PATCH 2/3] Reset: cix: add support for cix sky1 resets

[Gary Yang <gary.yang@cixtech.com>]

There are two reset controllers on Cix Sky1 Soc.
One is located in S0 domain, and the other is located
in S5 domain.

Signed-off-by: Gary Yang <gary.yang@cixtech.com>
---
 drivers/reset/Kconfig      |   7 +
 drivers/reset/Makefile     |   1 +
 drivers/reset/reset-sky1.c | 403 +++++++++++++++++++++++++++++++++++++
 3 files changed, 411 insertions(+)
 create mode 100644 drivers/reset/reset-sky1.c

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 78b7078478d4..45768cd3b135 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -278,6 +278,13 @@ config RESET_SIMPLE
 	   - SiFive FU740 SoCs
 	   - Sophgo SoCs
 
+config RESET_SKY1
+	bool "Cix Sky1 reset controller"
+	depends on HAS_IOMEM
+	depends on ARCH_CIX || COMPILE_TEST
+	help
+	  This enables the reset controller for Cix Sky1.
+
 config RESET_SOCFPGA
 	bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)
 	default ARM && ARCH_INTEL_SOCFPGA
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index f7934f9fb90b..a878ac4a6e4b 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
 obj-$(CONFIG_RESET_RZV2H_USB2PHY) += reset-rzv2h-usb2phy.o
 obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
 obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
+obj-$(CONFIG_RESET_SKY1) += reset-sky1.o
 obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_RESET_SPACEMIT) += reset-spacemit.o
 obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
diff --git a/drivers/reset/reset-sky1.c b/drivers/reset/reset-sky1.c
new file mode 100644
index 000000000000..14aa7292c0d5
--- /dev/null
+++ b/drivers/reset/reset-sky1.c
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * CIX System Reset Controller (SRC) driver
+ *
+ * Author: Jerry Zhu <jerry.zhu@cixtech.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/reset/cix,sky1-rst.h>
+#include <dt-bindings/reset/cix,sky1-rst-fch.h>
+
+#define SKY1_RESET_SLEEP_MIN_US		10000
+#define SKY1_RESET_SLEEP_MAX_US		20000
+
+struct sky1_src_signal {
+	unsigned int offset, mask;
+};
+
+struct sky1_src_variant {
+	const struct sky1_src_signal *signals;
+	unsigned int signals_num;
+};
+
+struct sky1_src {
+	struct reset_controller_dev rcdev;
+	struct regmap *regmap;
+	const struct sky1_src_signal *signals;
+};
+
+enum {
+	CSU_PM_RESET				= 0x304,
+	SENSORHUB_RESET				= 0x308,
+	SENSORHUB_NOC_RESET			= 0x30c,
+
+	RESET_GROUP0_S0_DOMAIN_0		= 0x400,
+	RESET_GROUP0_S0_DOMAIN_1		= 0x404,
+	RESET_GROUP1_USB_PHYS			= 0x408,
+	RESET_GROUP1_USB_CONTROLLERS		= 0x40c,
+
+	RESET_GROUP0_RCSU			= 0x800,
+	RESET_GROUP1_RCSU			= 0x804,
+
+};
+
+static const struct sky1_src_signal sky1_src_signals[SKY1_RESET_NUM] = {
+	/* reset group1 for s0 domain modules */
+	[SKY1_CSU_PM_RESET_N]		= { CSU_PM_RESET, BIT(0) },
+	[SKY1_SENSORHUB_RESET_N]	= { SENSORHUB_RESET, BIT(0) },
+	[SKY1_SENSORHUB_NOC_RESET_N]	= { SENSORHUB_NOC_RESET, BIT(0) },
+	[SKY1_DDRC_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(0) },
+	[SKY1_GIC_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(1) },
+	[SKY1_CI700_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(2) },
+	[SKY1_SYS_NI700_RESET_N]	= { RESET_GROUP0_S0_DOMAIN_0, BIT(3) },
+	[SKY1_MM_NI700_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(4) },
+	[SKY1_PCIE_NI700_RESET_N]	= { RESET_GROUP0_S0_DOMAIN_0, BIT(5) },
+	[SKY1_GPU_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(6) },
+	[SKY1_NPUTOP_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(7) },
+	[SKY1_NPUCORE0_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(8) },
+	[SKY1_NPUCORE1_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(9) },
+	[SKY1_NPUCORE2_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(10) },
+	[SKY1_VPU_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(11) },
+	[SKY1_ISP_SRESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(12) },
+	[SKY1_ISP_ARESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(13) },
+	[SKY1_ISP_HRESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(14) },
+	[SKY1_ISP_GDCRESET_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(15) },
+	[SKY1_DPU_RESET0_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(16) },
+	[SKY1_DPU_RESET1_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(17) },
+	[SKY1_DPU_RESET2_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(18) },
+	[SKY1_DPU_RESET3_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(19) },
+	[SKY1_DPU_RESET4_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(20) },
+	[SKY1_DP_RESET0_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(21) },
+	[SKY1_DP_RESET1_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(22) },
+	[SKY1_DP_RESET2_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(23) },
+	[SKY1_DP_RESET3_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(24) },
+	[SKY1_DP_RESET4_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(25) },
+	[SKY1_DP_PHY_RST_N]		= { RESET_GROUP0_S0_DOMAIN_0, BIT(26) },
+
+	/* reset group1 for s0 domain modules */
+	[SKY1_AUDIO_HIFI5_RESET_N]	= { RESET_GROUP0_S0_DOMAIN_1, BIT(0) },
+	[SKY1_AUDIO_HIFI5_NOC_RESET_N]	= { RESET_GROUP0_S0_DOMAIN_1, BIT(1) },
+	[SKY1_CSIDPHY_PRST0_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(2) },
+	[SKY1_CSIDPHY_CMNRST0_N]	= { RESET_GROUP0_S0_DOMAIN_1, BIT(3) },
+	[SKY1_CSI0_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(4) },
+	[SKY1_CSIDPHY_PRST1_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(5) },
+	[SKY1_CSIDPHY_CMNRST1_N]	= { RESET_GROUP0_S0_DOMAIN_1, BIT(6) },
+	[SKY1_CSI1_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(7) },
+	[SKY1_CSI2_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(8) },
+	[SKY1_CSI3_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(9) },
+	[SKY1_CSIBRDGE0_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(10) },
+	[SKY1_CSIBRDGE1_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(11) },
+	[SKY1_CSIBRDGE2_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(12) },
+	[SKY1_CSIBRDGE3_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(13) },
+	[SKY1_GMAC0_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(14) },
+	[SKY1_GMAC1_RST_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(15) },
+	[SKY1_PCIE0_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(16) },
+	[SKY1_PCIE1_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(17) },
+	[SKY1_PCIE2_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(18) },
+	[SKY1_PCIE3_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(19) },
+	[SKY1_PCIE4_RESET_N]		= { RESET_GROUP0_S0_DOMAIN_1, BIT(20) },
+
+	/* reset group1 for usb phys */
+	[SKY1_USB_DP_PHY0_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(0) },
+	[SKY1_USB_DP_PHY1_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(1) },
+	[SKY1_USB_DP_PHY2_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(2) },
+	[SKY1_USB_DP_PHY3_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(3) },
+	[SKY1_USB_DP_PHY0_RST_N]		= { RESET_GROUP1_USB_PHYS, BIT(4) },
+	[SKY1_USB_DP_PHY1_RST_N]		= { RESET_GROUP1_USB_PHYS, BIT(5) },
+	[SKY1_USB_DP_PHY2_RST_N]		= { RESET_GROUP1_USB_PHYS, BIT(6) },
+	[SKY1_USB_DP_PHY3_RST_N]		= { RESET_GROUP1_USB_PHYS, BIT(7) },
+	[SKY1_USBPHY_SS_PST_N]			= { RESET_GROUP1_USB_PHYS, BIT(8) },
+	[SKY1_USBPHY_SS_RST_N]			= { RESET_GROUP1_USB_PHYS, BIT(9) },
+	[SKY1_USBPHY_HS0_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(10) },
+	[SKY1_USBPHY_HS1_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(11) },
+	[SKY1_USBPHY_HS2_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(12) },
+	[SKY1_USBPHY_HS3_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(13) },
+	[SKY1_USBPHY_HS4_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(14) },
+	[SKY1_USBPHY_HS5_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(15) },
+	[SKY1_USBPHY_HS6_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(16) },
+	[SKY1_USBPHY_HS7_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(17) },
+	[SKY1_USBPHY_HS8_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(18) },
+	[SKY1_USBPHY_HS9_PRST_N]		= { RESET_GROUP1_USB_PHYS, BIT(19) },
+
+	/* reset group1 for usb controllers */
+	[SKY1_USBC_SS0_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(0) },
+	[SKY1_USBC_SS1_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(1) },
+	[SKY1_USBC_SS2_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(2) },
+	[SKY1_USBC_SS3_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(3) },
+	[SKY1_USBC_SS4_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(4) },
+	[SKY1_USBC_SS5_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(5) },
+	[SKY1_USBC_SS0_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(6) },
+	[SKY1_USBC_SS1_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(7) },
+	[SKY1_USBC_SS2_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(8) },
+	[SKY1_USBC_SS3_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(9) },
+	[SKY1_USBC_SS4_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(10) },
+	[SKY1_USBC_SS5_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(11) },
+	[SKY1_USBC_HS0_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(12) },
+	[SKY1_USBC_HS1_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(13) },
+	[SKY1_USBC_HS2_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(14) },
+	[SKY1_USBC_HS3_PRST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(15) },
+	[SKY1_USBC_HS0_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(16) },
+	[SKY1_USBC_HS1_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(17) },
+	[SKY1_USBC_HS2_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(18) },
+	[SKY1_USBC_HS3_RST_N]		= { RESET_GROUP1_USB_CONTROLLERS, BIT(19) },
+
+	/* reset group0 for rcsu */
+	[SKY1_AUDIO_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(0) },
+	[SKY1_CI700_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(1) },
+	[SKY1_CSI_RCSU0_RESET_N]		= { RESET_GROUP0_RCSU, BIT(2) },
+	[SKY1_CSI_RCSU1_RESET_N]		= { RESET_GROUP0_RCSU, BIT(3) },
+	[SKY1_CSU_PM_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(4) },
+	[SKY1_DDR_BROADCAST_RCSU_RESET_N]	= { RESET_GROUP0_RCSU, BIT(5) },
+	[SKY1_DDR_CTRL_RCSU_0_RESET_N]		= { RESET_GROUP0_RCSU, BIT(6) },
+	[SKY1_DDR_CTRL_RCSU_1_RESET_N]		= { RESET_GROUP0_RCSU, BIT(7) },
+	[SKY1_DDR_CTRL_RCSU_2_RESET_N]		= { RESET_GROUP0_RCSU, BIT(8) },
+	[SKY1_DDR_CTRL_RCSU_3_RESET_N]		= { RESET_GROUP0_RCSU, BIT(9) },
+	[SKY1_DDR_TZC400_RCSU_0_RESET_N]	= { RESET_GROUP0_RCSU, BIT(10) },
+	[SKY1_DDR_TZC400_RCSU_1_RESET_N]	= { RESET_GROUP0_RCSU, BIT(11) },
+	[SKY1_DDR_TZC400_RCSU_2_RESET_N]	= { RESET_GROUP0_RCSU, BIT(12) },
+	[SKY1_DDR_TZC400_RCSU_3_RESET_N]	= { RESET_GROUP0_RCSU, BIT(13) },
+	[SKY1_DP0_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(14) },
+	[SKY1_DP1_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(15) },
+	[SKY1_DP2_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(16) },
+	[SKY1_DP3_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(17) },
+	[SKY1_DP4_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(18) },
+	[SKY1_DPU0_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(19) },
+	[SKY1_DPU1_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(20) },
+	[SKY1_DPU2_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(21) },
+	[SKY1_DPU3_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(22) },
+	[SKY1_DPU4_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(23) },
+	[SKY1_DSU_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(24) },
+	[SKY1_FCH_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(25) },
+	[SKY1_GICD_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(26) },
+	[SKY1_GMAC_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(27) },
+	[SKY1_GPU_RCSU_RESET_N]			= { RESET_GROUP0_RCSU, BIT(28) },
+	[SKY1_ISP_RCSU0_RESET_N]		= { RESET_GROUP0_RCSU, BIT(29) },
+	[SKY1_ISP_RCSU1_RESET_N]		= { RESET_GROUP0_RCSU, BIT(30) },
+	[SKY1_NI700_MMHUB_RCSU_RESET_N]		= { RESET_GROUP0_RCSU, BIT(31) },
+
+	/* reset group1 for rcsu */
+	[SKY1_NPU_RCSU_RESET_N]			= { RESET_GROUP1_RCSU, BIT(0) },
+	[SKY1_NI700_PCIE_RCSU_RESET_N]		= { RESET_GROUP1_RCSU, BIT(1) },
+	[SKY1_PCIE_X421_RCSU_RESET_N]		= { RESET_GROUP1_RCSU, BIT(2) },
+	[SKY1_PCIE_X8_RCSU_RESET_N]		= { RESET_GROUP1_RCSU, BIT(3) },
+	[SKY1_SF_RCSU_RESET_N]			= { RESET_GROUP1_RCSU, BIT(4) },
+	[SKY1_RCSU_SMMU_MMHUB_RESET_N]		= { RESET_GROUP1_RCSU, BIT(5) },
+	[SKY1_RCSU_SMMU_PCIEHUB_RESET_N]	= { RESET_GROUP1_RCSU, BIT(6) },
+	[SKY1_RCSU_SYSHUB_RESET_N]		= { RESET_GROUP1_RCSU, BIT(7) },
+	[SKY1_NI700_SMN_RCSU_RESET_N]		= { RESET_GROUP1_RCSU, BIT(8) },
+	[SKY1_NI700_SYSHUB_RCSU_RESET_N]	= { RESET_GROUP1_RCSU, BIT(9) },
+	[SKY1_RCSU_USB2_HOST0_RESET_N]		= { RESET_GROUP1_RCSU, BIT(10) },
+	[SKY1_RCSU_USB2_HOST1_RESET_N]		= { RESET_GROUP1_RCSU, BIT(11) },
+	[SKY1_RCSU_USB2_HOST2_RESET_N]		= { RESET_GROUP1_RCSU, BIT(12) },
+	[SKY1_RCSU_USB2_HOST3_RESET_N]		= { RESET_GROUP1_RCSU, BIT(13) },
+	[SKY1_RCSU_USB3_TYPEA_DRD_RESET_N]	= { RESET_GROUP1_RCSU, BIT(14) },
+	[SKY1_RCSU_USB3_TYPEC_DRD_RESET_N]	= { RESET_GROUP1_RCSU, BIT(15) },
+	[SKY1_RCSU_USB3_TYPEC_HOST0_RESET_N]	= { RESET_GROUP1_RCSU, BIT(16) },
+	[SKY1_RCSU_USB3_TYPEC_HOST1_RESET_N]	= { RESET_GROUP1_RCSU, BIT(17) },
+	[SKY1_RCSU_USB3_TYPEC_HOST2_RESET_N]	= { RESET_GROUP1_RCSU, BIT(18) },
+	[SKY1_VPU_RCSU_RESET_N]			= { RESET_GROUP1_RCSU, BIT(19) },
+
+};
+
+enum {
+	FCH_SW_RST_FUNC			= 0x008,
+	FCH_SW_RST_BUS			= 0x00c,
+	FCH_SW_XSPI			= 0x010,
+};
+
+static const struct sky1_src_signal sky1_src_fch_signals[SKY1_FCH_RESET_NUM] = {
+	/* resets for fch_sw_rst_func */
+	[SW_I3C0_RST_FUNC_G_N]	= { FCH_SW_RST_FUNC, BIT(0) },
+	[SW_I3C0_RST_FUNC_I_N]	= { FCH_SW_RST_FUNC, BIT(1) },
+	[SW_I3C1_RST_FUNC_G_N]	= { FCH_SW_RST_FUNC, BIT(2) },
+	[SW_I3C1_RST_FUNC_I_N]	= { FCH_SW_RST_FUNC, BIT(3) },
+	[SW_UART0_RST_FUNC_N]	= { FCH_SW_RST_FUNC, BIT(4) },
+	[SW_UART1_RST_FUNC_N]	= { FCH_SW_RST_FUNC, BIT(5) },
+	[SW_UART2_RST_FUNC_N]	= { FCH_SW_RST_FUNC, BIT(6) },
+	[SW_UART3_RST_FUNC_N]	= { FCH_SW_RST_FUNC, BIT(7) },
+	[SW_TIMER_RST_FUNC_N]	= { FCH_SW_RST_FUNC, BIT(20) },
+
+	/* resets for fch_sw_rst_bus */
+	[SW_I3C0_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(0) },
+	[SW_I3C1_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(1) },
+	[SW_DMA_RST_AXI_N]	= { FCH_SW_RST_BUS, BIT(2) },
+	[SW_UART0_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(4) },
+	[SW_UART1_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(5) },
+	[SW_UART2_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(6) },
+	[SW_UART3_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(7) },
+	[SW_SPI0_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(8) },
+	[SW_SPI1_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(9) },
+	[SW_I2C0_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(12) },
+	[SW_I2C1_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(13) },
+	[SW_I2C2_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(14) },
+	[SW_I2C3_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(15) },
+	[SW_I2C4_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(16) },
+	[SW_I2C5_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(17) },
+	[SW_I2C6_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(18) },
+	[SW_I2C7_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(19) },
+	[SW_GPIO_RST_APB_N]	= { FCH_SW_RST_BUS, BIT(21) },
+
+	/* resets for fch_sw_xspi */
+	[SW_XSPI_REG_RST_N]	= { FCH_SW_XSPI, BIT(0) },
+	[SW_XSPI_SYS_RST_N]	= { FCH_SW_XSPI, BIT(1) },
+};
+
+static struct sky1_src *to_sky1_src(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct sky1_src, rcdev);
+}
+
+static int sky1_reset_update(struct sky1_src *sky1src,
+			     unsigned long id, unsigned int value)
+{
+	const struct sky1_src_signal *signal = &sky1src->signals[id];
+
+	return regmap_update_bits(sky1src->regmap,
+				  signal->offset, signal->mask, value);
+}
+
+static int sky1_reset_set(struct reset_controller_dev *rcdev,
+			  unsigned long id, bool assert)
+{
+	struct sky1_src *sky1src = to_sky1_src(rcdev);
+	unsigned int value = assert ? 0 : sky1src->signals[id].mask;
+
+	return sky1_reset_update(sky1src, id, value);
+}
+
+static int sky1_reset(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	sky1_reset_set(rcdev, id, true);
+	usleep_range(SKY1_RESET_SLEEP_MIN_US,
+		     SKY1_RESET_SLEEP_MAX_US);
+
+	sky1_reset_set(rcdev, id, false);
+
+	/*
+	 * Ensure component is taken out reset state by sleeping also after
+	 * deasserting the reset, Otherwise, the component may not be ready
+	 * for operation.
+	 */
+	usleep_range(SKY1_RESET_SLEEP_MIN_US,
+		     SKY1_RESET_SLEEP_MAX_US);
+	return 0;
+}
+
+static int sky1_reset_assert(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	return sky1_reset_set(rcdev, id, true);
+}
+
+static int sky1_reset_deassert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return sky1_reset_set(rcdev, id, false);
+}
+
+static int sky1_reset_status(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	unsigned int value = 0;
+	struct sky1_src *sky1_src = to_sky1_src(rcdev);
+	const struct sky1_src_signal *signal = &sky1_src->signals[id];
+
+	regmap_read(sky1_src->regmap, signal->offset, &value);
+	return !(value & signal->mask);
+}
+
+static const struct reset_control_ops sky1_src_ops = {
+	.reset    = sky1_reset,
+	.assert   = sky1_reset_assert,
+	.deassert = sky1_reset_deassert,
+	.status   = sky1_reset_status
+};
+
+static const struct sky1_src_variant variant_sky1 = {
+	.signals = sky1_src_signals,
+	.signals_num = ARRAY_SIZE(sky1_src_signals),
+};
+
+static const struct sky1_src_variant variant_sky1_fch = {
+	.signals = sky1_src_fch_signals,
+	.signals_num = ARRAY_SIZE(sky1_src_fch_signals),
+};
+
+static const struct regmap_config sky1_src_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.name = "src",
+};
+
+static int sky1_reset_probe(struct platform_device *pdev)
+{
+	struct sky1_src *sky1src;
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	const struct sky1_src_variant *variant = device_get_match_data(dev);
+
+	sky1src = devm_kzalloc(dev, sizeof(*sky1src), GFP_KERNEL);
+	if (!sky1src)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	sky1src->regmap = devm_regmap_init_mmio(dev, base, &sky1_src_config);
+	if (IS_ERR(sky1src->regmap)) {
+		dev_err(dev, "Unable to get sky1-src regmap");
+		return PTR_ERR(sky1src->regmap);
+	}
+
+	sky1src->signals = variant->signals;
+	sky1src->rcdev.owner     = THIS_MODULE;
+	sky1src->rcdev.nr_resets = variant->signals_num;
+	sky1src->rcdev.ops       = &sky1_src_ops;
+	sky1src->rcdev.of_node   = dev->of_node;
+	sky1src->rcdev.dev       = dev;
+
+	return devm_reset_controller_register(dev, &sky1src->rcdev);
+}
+
+static const struct of_device_id sky1_reset_dt_ids[] = {
+	{ .compatible = "cix,sky1-rst", .data = &variant_sky1 },
+	{ .compatible = "cix,sky1-rst-fch", .data = &variant_sky1_fch },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sky1_reset_dt_ids);
+
+static struct platform_driver sky1_reset_driver = {
+	.probe	= sky1_reset_probe,
+	.driver = {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= sky1_reset_dt_ids,
+	},
+};
+static int __init reset_sky1_init(void)
+{
+	return platform_driver_register(&sky1_reset_driver);
+}
+subsys_initcall(reset_sky1_init);
+
+static void __exit reset_sky1_exit(void)
+{
+	platform_driver_unregister(&sky1_reset_driver);
+}
+module_exit(reset_sky1_exit);
+
+MODULE_AUTHOR("Jerry Zhu <jerry.zhu@cixtech.com>");
+MODULE_DESCRIPTION("Cix Sky1 reset driver");
+MODULE_LICENSE("GPL");
-- 
2.49.0