All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: Alexander Kurz <akurz@blala.de>
Cc: "Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
	"Dzmitry Sankouski" <dsankouski@gmail.com>,
	"Griffin Kroah-Hartman" <griffin.kroah@fairphone.com>,
	"Mathieu Dubois-Briand" <mathieu.dubois-briand@bootlin.com>,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Dr . David Alan Gilbert" <linux@treblig.org>,
	"Job Sava" <jsava@criticallink.com>,
	"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
	devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: Re: [PATCH v7 3/6] Input: mc13783-pwrbutton: convert pdata members to array
Date: Thu, 13 Nov 2025 14:30:28 +0000	[thread overview]
Message-ID: <20251113143028.GJ1949330@google.com> (raw)
In-Reply-To: <20251031195718.1586-4-akurz@blala.de>

On Fri, 31 Oct 2025, Alexander Kurz wrote:

> As preparation for the extension of support for all three mc13xxx
> variants, convert the members of mc13xxx_buttons_platform_data to
> arrays to allow index access within the next commit.
> 
> Signed-off-by: Alexander Kurz <akurz@blala.de>
> ---
>  drivers/input/misc/mc13783-pwrbutton.c | 42 +++++++++++++-------------
>  include/linux/mfd/mc13xxx.h            |  8 ++---

Acked-by: Lee Jones <lee@kernel.org>

>  2 files changed, 23 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/input/misc/mc13783-pwrbutton.c b/drivers/input/misc/mc13783-pwrbutton.c
> index 20f68aab6edf..2ee115d77b1c 100644
> --- a/drivers/input/misc/mc13783-pwrbutton.c
> +++ b/drivers/input/misc/mc13783-pwrbutton.c
> @@ -108,24 +108,24 @@ static int mc13783_pwrbutton_probe(struct platform_device *pdev)
>  	if (!priv)
>  		return -ENOMEM;
>  
> -	reg |= (pdata->b1on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON1BDBNC;
> -	reg |= (pdata->b2on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON2BDBNC;
> -	reg |= (pdata->b3on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON3BDBNC;
> +	reg |= (pdata->b_on_flags[0] & 0x3) << MC13783_POWER_CONTROL_2_ON1BDBNC;
> +	reg |= (pdata->b_on_flags[1] & 0x3) << MC13783_POWER_CONTROL_2_ON2BDBNC;
> +	reg |= (pdata->b_on_flags[2] & 0x3) << MC13783_POWER_CONTROL_2_ON3BDBNC;
>  
>  	priv->pwr = pwr;
>  	priv->mc13783 = mc13783;
>  
>  	mc13xxx_lock(mc13783);
>  
> -	if (pdata->b1on_flags & MC13783_BUTTON_ENABLE) {
> -		priv->keymap[0] = pdata->b1on_key;
> -		if (pdata->b1on_key != KEY_RESERVED)
> -			__set_bit(pdata->b1on_key, pwr->keybit);
> +	if (pdata->b_on_flags[0] & MC13783_BUTTON_ENABLE) {
> +		priv->keymap[0] = pdata->b_on_key[0];
> +		if (pdata->b_on_key[0] != KEY_RESERVED)
> +			__set_bit(pdata->b_on_key[0], pwr->keybit);
>  
> -		if (pdata->b1on_flags & MC13783_BUTTON_POL_INVERT)
> +		if (pdata->b_on_flags[0] & MC13783_BUTTON_POL_INVERT)
>  			priv->flags |= MC13783_PWRB_B1_POL_INVERT;
>  
> -		if (pdata->b1on_flags & MC13783_BUTTON_RESET_EN)
> +		if (pdata->b_on_flags[0] & MC13783_BUTTON_RESET_EN)
>  			reg |= MC13783_POWER_CONTROL_2_ON1BRSTEN;
>  
>  		irq = platform_get_irq_byname(pdev, "b1on");
> @@ -144,15 +144,15 @@ static int mc13783_pwrbutton_probe(struct platform_device *pdev)
>  		priv->irq[0] = irq;
>  	}
>  
> -	if (pdata->b2on_flags & MC13783_BUTTON_ENABLE) {
> -		priv->keymap[1] = pdata->b2on_key;
> -		if (pdata->b2on_key != KEY_RESERVED)
> -			__set_bit(pdata->b2on_key, pwr->keybit);
> +	if (pdata->b_on_flags[1] & MC13783_BUTTON_ENABLE) {
> +		priv->keymap[1] = pdata->b_on_key[1];
> +		if (pdata->b_on_key[1] != KEY_RESERVED)
> +			__set_bit(pdata->b_on_key[1], pwr->keybit);
>  
> -		if (pdata->b2on_flags & MC13783_BUTTON_POL_INVERT)
> +		if (pdata->b_on_flags[1] & MC13783_BUTTON_POL_INVERT)
>  			priv->flags |= MC13783_PWRB_B2_POL_INVERT;
>  
> -		if (pdata->b2on_flags & MC13783_BUTTON_RESET_EN)
> +		if (pdata->b_on_flags[1] & MC13783_BUTTON_RESET_EN)
>  			reg |= MC13783_POWER_CONTROL_2_ON2BRSTEN;
>  
>  		irq = platform_get_irq_byname(pdev, "b2on");
> @@ -171,15 +171,15 @@ static int mc13783_pwrbutton_probe(struct platform_device *pdev)
>  		priv->irq[1] = irq;
>  	}
>  
> -	if (pdata->b3on_flags & MC13783_BUTTON_ENABLE) {
> -		priv->keymap[2] = pdata->b3on_key;
> -		if (pdata->b3on_key != KEY_RESERVED)
> -			__set_bit(pdata->b3on_key, pwr->keybit);
> +	if (pdata->b_on_flags[2] & MC13783_BUTTON_ENABLE) {
> +		priv->keymap[2] = pdata->b_on_key[2];
> +		if (pdata->b_on_key[2] != KEY_RESERVED)
> +			__set_bit(pdata->b_on_key[2], pwr->keybit);
>  
> -		if (pdata->b3on_flags & MC13783_BUTTON_POL_INVERT)
> +		if (pdata->b_on_flags[2] & MC13783_BUTTON_POL_INVERT)
>  			priv->flags |= MC13783_PWRB_B3_POL_INVERT;
>  
> -		if (pdata->b3on_flags & MC13783_BUTTON_RESET_EN)
> +		if (pdata->b_on_flags[2] & MC13783_BUTTON_RESET_EN)
>  			reg |= MC13783_POWER_CONTROL_2_ON3BRSTEN;
>  
>  		irq = platform_get_irq_byname(pdev, "b3on");
> diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
> index dd46fe424a80..4437ab80fcf8 100644
> --- a/include/linux/mfd/mc13xxx.h
> +++ b/include/linux/mfd/mc13xxx.h
> @@ -181,12 +181,8 @@ struct mc13xxx_leds_platform_data {
>  #define MC13783_BUTTON_RESET_EN		(1 << 4)
>  
>  struct mc13xxx_buttons_platform_data {
> -	int b1on_flags;
> -	unsigned short b1on_key;
> -	int b2on_flags;
> -	unsigned short b2on_key;
> -	int b3on_flags;
> -	unsigned short b3on_key;
> +	int b_on_flags[3];
> +	unsigned int b_on_key[3];
>  };
>  
>  #define MC13783_TS_ATO_FIRST	false
> -- 
> 2.39.5
> 

-- 
Lee Jones [李琼斯]

  reply	other threads:[~2025-11-13 14:30 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-31 19:57 [PATCH v7 0/6] Fix, extend and support OF to mc13xxx pwrbutton Alexander Kurz
2025-10-31 19:57 ` [PATCH v7 1/6] Input: mc13783-pwrbutton: use managed resources Alexander Kurz
2025-10-31 19:57 ` [PATCH v7 2/6] Input: mc13783-pwrbutton: fix irq mixup and use resources Alexander Kurz
2025-10-31 19:57 ` [PATCH v7 3/6] Input: mc13783-pwrbutton: convert pdata members to array Alexander Kurz
2025-11-13 14:30   ` Lee Jones [this message]
2025-10-31 19:57 ` [PATCH v7 4/6] Input: mc13783-pwrbutton: enable other mc13xxx PMIC Alexander Kurz
2025-10-31 19:57 ` [PATCH v7 5/6] Input: mc13783-pwrbutton: add OF support and drop platform_data Alexander Kurz
2025-11-13 14:30   ` Lee Jones
2025-10-31 19:57 ` [PATCH v7 6/6] ARM: dts: imx53: add imx53-qsrb PMIC power button Alexander Kurz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251113143028.GJ1949330@google.com \
    --to=lee@kernel.org \
    --cc=akurz@blala.de \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dsankouski@gmail.com \
    --cc=festevam@gmail.com \
    --cc=griffin.kroah@fairphone.com \
    --cc=heiko@sntech.de \
    --cc=imx@lists.linux.dev \
    --cc=jsava@criticallink.com \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@treblig.org \
    --cc=mathieu.dubois-briand@bootlin.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=u.kleine-koenig@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.