From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Srinivas Kandagatla <srini@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
linux-sound@vger.kernel.org (open list:QCOM AUDIO (ASoC) DRIVERS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 9/9] ASoC: codecs: lpass-rx-macro: fix mute_stream affecting all paths
Date: Mon, 17 Nov 2025 00:15:21 -0500 [thread overview]
Message-ID: <20251117051523.16462-9-jonathan@marek.ca> (raw)
In-Reply-To: <20251117051523.16462-1-jonathan@marek.ca>
The current mute_steam() implementation affects all paths instead of
only those in use by the DAI.
For example, playing to 2 DAIs simultaneously with mixing, stopping
one will mute the other.
Rework to use the same logic as hw_params() to mute only the relevant paths.
(also, use "rx->main_clk_users[j] > 0" instead of dsm_reg, which is
equivalent. I also don't think the clock enable should be in this function,
but that's a change for another patch)
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
sound/soc/codecs/lpass-rx-macro.c | 74 +++++++++++++++----------------
1 file changed, 35 insertions(+), 39 deletions(-)
diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c
index a8fc842cc94ef..d7e51f02a9115 100644
--- a/sound/soc/codecs/lpass-rx-macro.c
+++ b/sound/soc/codecs/lpass-rx-macro.c
@@ -1905,52 +1905,48 @@ static int rx_macro_digital_mute(struct snd_soc_dai *dai, int mute, int stream)
{
struct snd_soc_component *component = dai->component;
struct rx_macro *rx = snd_soc_component_get_drvdata(component);
- uint16_t j, reg, mix_reg, dsm_reg;
- u16 int_mux_cfg0, int_mux_cfg1;
+ u32 port, j, reg, mix_reg, int_mux_cfg0, int_mux_cfg1;
+ u32 mask, val;
u8 int_mux_cfg0_val, int_mux_cfg1_val;
- switch (dai->id) {
- case RX_MACRO_AIF1_PB:
- case RX_MACRO_AIF2_PB:
- case RX_MACRO_AIF3_PB:
- case RX_MACRO_AIF4_PB:
- for (j = 0; j < INTERP_MAX; j++) {
- reg = CDC_RX_RXn_RX_PATH_CTL(rx, j);
- mix_reg = CDC_RX_RXn_RX_PATH_MIX_CTL(rx, j);
- dsm_reg = CDC_RX_RXn_RX_PATH_DSM_CTL(rx, j);
-
- if (mute) {
- snd_soc_component_update_bits(component, reg,
- CDC_RX_PATH_PGA_MUTE_MASK,
- CDC_RX_PATH_PGA_MUTE_ENABLE);
- snd_soc_component_update_bits(component, mix_reg,
- CDC_RX_PATH_PGA_MUTE_MASK,
- CDC_RX_PATH_PGA_MUTE_ENABLE);
- } else {
- snd_soc_component_update_bits(component, reg,
- CDC_RX_PATH_PGA_MUTE_MASK, 0x0);
- snd_soc_component_update_bits(component, mix_reg,
- CDC_RX_PATH_PGA_MUTE_MASK, 0x0);
+ if (stream != SNDRV_PCM_STREAM_PLAYBACK)
+ return 0;
+
+ for (j = 0; j < INTERP_MAX; j++) {
+ reg = CDC_RX_RXn_RX_PATH_CTL(rx, j);
+ mix_reg = CDC_RX_RXn_RX_PATH_MIX_CTL(rx, j);
+
+ mask = CDC_RX_PATH_PGA_MUTE_MASK;
+ val = 0;
+ if (mute)
+ val |= CDC_RX_PATH_PGA_MUTE_ENABLE;
+ if (rx->main_clk_users[j] > 0) {
+ mask |= CDC_RX_PATH_CLK_EN_MASK;
+ val |= CDC_RX_PATH_CLK_ENABLE;
+ }
+
+ int_mux_cfg0 = CDC_RX_INP_MUX_RX_INT0_CFG0 + j * 8;
+ int_mux_cfg1 = int_mux_cfg0 + 4;
+ int_mux_cfg0_val = snd_soc_component_read(component, int_mux_cfg0);
+ int_mux_cfg1_val = snd_soc_component_read(component, int_mux_cfg1);
+
+ for_each_set_bit(port, &rx->active_ch_mask[dai->id], RX_MACRO_PORTS_MAX) {
+ if (((int_mux_cfg0_val & 0x0f) == port + INTn_1_INP_SEL_RX0) ||
+ ((int_mux_cfg0_val >> 4) == port + INTn_1_INP_SEL_RX0) ||
+ ((int_mux_cfg1_val >> 4) == port + INTn_1_INP_SEL_RX0)) {
+ snd_soc_component_update_bits(component, reg, mask, val);
}
- int_mux_cfg0 = CDC_RX_INP_MUX_RX_INT0_CFG0 + j * 8;
- int_mux_cfg1 = int_mux_cfg0 + 4;
- int_mux_cfg0_val = snd_soc_component_read(component, int_mux_cfg0);
- int_mux_cfg1_val = snd_soc_component_read(component, int_mux_cfg1);
-
- if (snd_soc_component_read(component, dsm_reg) & 0x01) {
- if (int_mux_cfg0_val || (int_mux_cfg1_val & 0xF0))
- snd_soc_component_update_bits(component, reg, 0x20, 0x20);
- if (int_mux_cfg1_val & 0x0F) {
- snd_soc_component_update_bits(component, reg, 0x20, 0x20);
- snd_soc_component_update_bits(component, mix_reg, 0x20,
- 0x20);
+ if ((int_mux_cfg1_val & 0x0f) == port + INTn_2_INP_SEL_RX0) {
+ snd_soc_component_update_bits(component, mix_reg, mask, val);
+ /* main clock needs to be enabled for mix to be useful: */
+ if (rx->main_clk_users[j] > 0) {
+ snd_soc_component_update_bits(component, reg,
+ CDC_RX_PATH_CLK_EN_MASK,
+ CDC_RX_PATH_CLK_ENABLE);
}
}
}
- break;
- default:
- break;
}
return 0;
}
--
2.51.0
next prev parent reply other threads:[~2025-11-17 5:17 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-17 5:15 [PATCH 1/9] ASoC: codecs: lpass-wsa-macro: remove unnecessary bounds check Jonathan Marek
2025-11-17 5:15 ` [PATCH 2/9] ASoC: codecs: lpass-wsa-macro: remove useless gain read/write sequence Jonathan Marek
2025-11-19 15:36 ` Srinivas Kandagatla
2025-11-19 15:36 ` Srinivas Kandagatla
2025-11-17 5:15 ` [PATCH 3/9] ASoC: codecs: lpass-wsa-macro: remove mix path event Jonathan Marek
2025-11-19 15:34 ` Srinivas Kandagatla
2025-11-17 5:15 ` [PATCH 4/9] ASoC: codecs: lpass-wsa-macro: fix path clock dependencies Jonathan Marek
2025-11-19 15:34 ` Srinivas Kandagatla
2025-11-17 5:15 ` [PATCH 5/9] ASoC: codecs: lpass-wsa-macro: add volume controls for mix path Jonathan Marek
2025-11-19 15:34 ` Srinivas Kandagatla
2025-11-17 5:15 ` [PATCH 6/9] ASoC: codecs: lpass-wsa-macro: remove main path event Jonathan Marek
2025-11-19 15:34 ` Srinivas Kandagatla
2025-11-17 5:15 ` [PATCH 7/9] ASoC: codecs: lpass-wsa-macro: add RX4 and RX5 Jonathan Marek
2025-11-19 15:33 ` Srinivas Kandagatla
2025-11-19 17:13 ` Jonathan Marek
2025-11-17 5:15 ` [PATCH 8/9] ASoC: codecs: lpass-wsa-macro: remove unused WSA_MACRO_RX_MIX enum Jonathan Marek
2025-11-19 15:33 ` Srinivas Kandagatla
2025-11-17 5:15 ` Jonathan Marek [this message]
2025-11-19 15:33 ` [PATCH 9/9] ASoC: codecs: lpass-rx-macro: fix mute_stream affecting all paths Srinivas Kandagatla
2025-11-19 15:35 ` [PATCH 1/9] ASoC: codecs: lpass-wsa-macro: remove unnecessary bounds check Srinivas Kandagatla
2025-11-20 9:40 ` (subset) " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251117051523.16462-9-jonathan@marek.ca \
--to=jonathan@marek.ca \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=srini@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.