Re: [PATCH v8 2/2] usb: dwc3: Add Google Tensor SoC DWC3 glue driver

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Sat, Nov 22, 2025 at 09:32:06AM +0000, Roy Luo wrote:
> Add support for the DWC3 USB controller found on Google Tensor G5
> (codename: laguna). The controller features dual-role functionality
> and hibernation.
> 
> The primary focus is implementing hibernation support in host mode,
> enabling the controller to enter a low-power state (D3). This is
> particularly relevant during system power state transition and
> runtime power management for power efficiency.
> Highlights:
> - Align suspend callback with dwc3_suspend_common() for deciding
>   between a full teardown and hibernation in host mode.
> - Integration with `psw` (power switchable) and `top` power domains,
>   managing their states and device links to support hibernation.
> - A notifier callback dwc3_google_usb_psw_pd_notifier() for
>   `psw` power domain events to manage controller state
>   transitions to/from D3.
> - Coordination of the `non_sticky` reset during power state
>   transitions, asserting it on D3 entry and deasserting on D0 entry
>   in hibernation scenario.
> - Handling of high-speed and super-speed PME interrupts
>   that are generated by remote wakeup during hibernation.
> 
> Co-developed-by: Joy Chakraborty <joychakr@google.com>
> Signed-off-by: Joy Chakraborty <joychakr@google.com>
> Co-developed-by: Naveen Kumar <mnkumar@google.com>
> Signed-off-by: Naveen Kumar <mnkumar@google.com>
> Signed-off-by: Roy Luo <royluo@google.com>
> ---
>  drivers/usb/dwc3/Kconfig       |  13 +
>  drivers/usb/dwc3/Makefile      |   1 +
>  drivers/usb/dwc3/dwc3-google.c | 628 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 642 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 4925d15084f816d3ff92059b476ebcc799b56b51..f58c70dabf108878cbefe0abea88572d9ae81e26 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -200,4 +200,17 @@ config USB_DWC3_GENERIC_PLAT
>  	  the dwc3 child node in the device tree.
>  	  Say 'Y' or 'M' here if your platform integrates DWC3 in a similar way.
>  
> +config USB_DWC3_GOOGLE
> +	tristate "Google Platform"
> +	depends on COMPILE_TEST
> +	depends on OF && COMMON_CLK && RESET_CONTROLLER

Shouldn't this be:
	depends on (OF && COMMON_CLK && RESET_CONTROLLER) || COMPILE_TEST

I shouldn't have to enable those options to just get a build test here,
the apis should be properly stubbed out if those options are not
enabled, right?

thanks,

greg k-h