All of lore.kernel.org
 help / color / mirror / Atom feed
From: E Shattow <e@freeshell.de>
To: Rick Chen <rick@andestech.com>, Leo <ycliang@andestech.com>,
	Minda Chen <minda.chen@starfivetech.com>,
	Hal Feng <hal.feng@starfivetech.com>,
	Tom Rini <trini@konsulko.com>,
	Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: u-boot@lists.denx.de, E Shattow <e@freeshell.de>,
	Icenowy Zheng <uwu@icenowy.me>
Subject: [RFC PATCH v1 1/4] riscv: dts: starfive: Add Orange Pi RV from upstream Linux for-next
Date: Wed, 26 Nov 2025 14:15:26 -0800	[thread overview]
Message-ID: <20251126221552.87574-2-e@freeshell.de> (raw)
In-Reply-To: <20251126221552.87574-1-e@freeshell.de>

Import dts for Orange Pi RV as per-board automatic inclusion. This
commit should be reverted when devicetree-rebasing release candidate for
Linux 6.19 is sync'ed.

Signed-off-by: E Shattow <e@freeshell.de>
---
 arch/riscv/dts/jh7110-orangepi-rv-u-boot.dtsi | 76 +++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 arch/riscv/dts/jh7110-orangepi-rv-u-boot.dtsi

diff --git a/arch/riscv/dts/jh7110-orangepi-rv-u-boot.dtsi b/arch/riscv/dts/jh7110-orangepi-rv-u-boot.dtsi
new file mode 100644
index 00000000000..053c35992ec
--- /dev/null
+++ b/arch/riscv/dts/jh7110-orangepi-rv-u-boot.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "jh7110-common.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi RV";
+	compatible = "xunlong,orangepi-rv", "starfive,jh7110";
+
+	/* This regulator is always on by hardware */
+	reg_vcc3v3_pcie: regulator-vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3-pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&sysgpio 62 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+	starfive,tx-use-rgmii-clk;
+	status = "okay";
+};
+
+&mmc0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cap-sd-highspeed;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	vmmc-supply = <&reg_vcc3v3_pcie>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+
+	ap6256: wifi@1 {
+		compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		/* TODO: out-of-band IRQ on GPIO21, lacking pinctrl support */
+	};
+};
+
+&mmc1 {
+	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&phy0 {
+	rx-internal-delay-ps = <1500>;
+	tx-internal-delay-ps = <1500>;
+	motorcomm,rx-clk-drv-microamp = <3970>;
+	motorcomm,rx-data-drv-microamp = <2910>;
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-10-inverted;
+	motorcomm,tx-clk-100-inverted;
+	motorcomm,tx-clk-1000-inverted;
+};
+
+&pwmdac {
+	status = "okay";
+};
-- 
2.50.0


  reply	other threads:[~2025-11-26 22:17 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-26 22:15 [RFC PATCH v1 0/4] Add upstream board Xunlong Orange Pi RV E Shattow
2025-11-26 22:15 ` E Shattow [this message]
2025-11-26 22:15 ` [RFC PATCH v1 2/4] board: starfive: visionfive2: Add Orange Pi RV selection by product_id E Shattow
2025-11-26 22:15 ` [RFC PATCH v1 3/4] riscv: dts: Add placeholder files for pending upstream Orange Pi RV E Shattow
2025-11-26 22:15 ` [RFC PATCH v1 4/4] configs: starfive: Add Orange Pi RV to visionfive2 E Shattow
2025-11-26 22:34 ` [RFC PATCH v1 0/4] Add upstream board Xunlong Orange Pi RV Heinrich Schuchardt
2025-11-26 23:42   ` E Shattow
2025-11-27  5:21     ` Icenowy Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251126221552.87574-2-e@freeshell.de \
    --to=e@freeshell.de \
    --cc=hal.feng@starfivetech.com \
    --cc=minda.chen@starfivetech.com \
    --cc=rick@andestech.com \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    --cc=uwu@icenowy.me \
    --cc=xypron.glpk@gmx.de \
    --cc=ycliang@andestech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.