[PATCH v1 1/2] arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt

[Vitor Soares <ivitro@gmail.com>]

From: Vitor Soares <vitor.soares@toradex.com>

Change the PHY interrupt trigger type from IRQ_TYPE_LEVEL_LOW to
IRQ_TYPE_EDGE_FALLING to match the PCA9745 GPIO expander hardware
capabilities and avoid emulated level detection.

Fixes: 90bbe88e0ea6 ("arm64: dts: freescale: add Toradex SMARC iMX95")
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
---
 arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi
index afbdadcb3686..2cbd5606cb19 100644
--- a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi
@@ -582,7 +582,7 @@ &netc_emdio {
 	ethphy1: ethernet-phy@1 {
 		reg = <1>;
 		interrupt-parent = <&som_gpio_expander_1>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 	};
-- 
2.51.0